Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Part Categories +
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
Targa Top Seals
Filter by brand
90156509145/8KIT
Product Information
This OE Match rear roll bar seal kit is a complete sealing and installation set designed for Porsche 911 Targa models from 1970 to 1973. The kit includes the rear roll bar rubber seal together with the correct plastic rivets and cover plugs required for proper installation on the Targa roll bar. The seal sits along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41, 39 and 40.
Kit Includes
1 × OE Match Rear Roll Bar Seal – 90156509144
4 × OE Match Porsche Plastic Rivets – 99970318640
4 × Genuine Porsche Cover Plug for Plastic Rivet – 99959138440
Classic Porsche 911 Targa models use a removable roof panel that locks into the windshield frame at the front and seals against the Targa roll bar at the rear. The rear roll bar seal provides the rubber interface between the roof panel and the roll bar structure.
This OE Match seal is manufactured to replicate the original Porsche seal profile and compression characteristics. It ensures correct fitment and proper sealing performance during installation.
The included plastic rivets and cover plugs secure the seal to the roll bar and provide a clean factory-style finish once installed.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Targa roof seals are exposed to UV light, weather and constant compression over many years. As the rubber ages it can harden, shrink or crack, allowing water leaks or wind noise to develop. Replacing the seal and hardware restores proper weather protection and ensures the roof panel fits securely against the roll bar.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
Product Information
Rear roll bar seal Targa with plastic rivets and cover plugsThis OE Match rear roll bar seal kit is a complete sealing and installation set designed for Porsche 911 Targa models from 1970 to 1973. The kit includes the rear roll bar rubber seal together with the correct plastic rivets and cover plugs required for proper installation on the Targa roll bar. The seal sits along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41, 39 and 40.
Kit Includes
1 × OE Match Rear Roll Bar Seal – 90156509144
4 × OE Match Porsche Plastic Rivets – 99970318640
4 × Genuine Porsche Cover Plug for Plastic Rivet – 99959138440
Classic Porsche 911 Targa models use a removable roof panel that locks into the windshield frame at the front and seals against the Targa roll bar at the rear. The rear roll bar seal provides the rubber interface between the roof panel and the roll bar structure.
This OE Match seal is manufactured to replicate the original Porsche seal profile and compression characteristics. It ensures correct fitment and proper sealing performance during installation.
The included plastic rivets and cover plugs secure the seal to the roll bar and provide a clean factory-style finish once installed.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Targa roof seals are exposed to UV light, weather and constant compression over many years. As the rubber ages it can harden, shrink or crack, allowing water leaks or wind noise to develop. Replacing the seal and hardware restores proper weather protection and ensures the roof panel fits securely against the roll bar.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Rear roll bar seal targa. Porsche 911 1970-73 (90156509145/8)
4 x Plastic rivet for targa seal. Porsche 911 74-89 / 964 TARGA (99970318640/1)
4 x Cover Plug Plastic Rivet for targa seal. Porsche 911 67-94 Targa (99959138440)
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€195.39 inc. VAT
Now €175.83 inc. VAT
In Stock - 24 Hour Dispatch
TARGATOP911B
Product Information
Our Targa Top Restoration Kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your targa top back to factory new condition.
We use the original German materials that exactly match Stüttgart factory specifications; deep grain vinyl roof skin, foam backed nylon headlining, densely woven linen backing cloth and insulation material. All materials are precision cut, edge bound and pre-formed to guarantee a factory authentic fit.
The kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of a home mechanic.
Fits:
Porsche 911 1970-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 42
Targa Top Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TARGATOP911B
The product you are viewing cross references to these numbers
Product Information
Targa Top Restoration Kit with Top SealsOur Targa Top Restoration Kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your targa top back to factory new condition.
We use the original German materials that exactly match Stüttgart factory specifications; deep grain vinyl roof skin, foam backed nylon headlining, densely woven linen backing cloth and insulation material. All materials are precision cut, edge bound and pre-formed to guarantee a factory authentic fit.
The kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of a home mechanic.
Fits:
Porsche 911 1970-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 42
Targa Top Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TARGATOP911B
90156500001
91156525940
91156526040
91156525940
91156526040
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Targa Top Restoration Kit. Porsche 912/ 911 / 964 (90156500001)
1 x Targa top seal lateral seal (over door glass). Porsche 911 1970-89 (91156525940/8)
1 x Targa top seal lateral seal (over door glass). Porsche 911 1970-89 (91156526040/8)
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€816.67 inc. VAT
Now €734.99 inc. VAT
In Stock - 24 Hour Dispatch
91156509047
Product Information
Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
The product you are viewing cross references to these numbers
Product Information
Front Screen Roll Bar Seal for 911 Targa and Cabriolet models.Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
91156509047
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€333.08 inc. VAT
Now €299.77 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91156509047/1
Product Information
Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
The product you are viewing cross references to these numbers
Product Information
Front screen roll bar seal for 911 Targa and Cabriolet models.Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
91156509047
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€162.63 inc. VAT
Now €146.37 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91156551
Product Information
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 10 (LEFT) and 11 (RIGHT)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156551
The product you are viewing cross references to these numbers
Product Information
Front Targa roll bar padding seal. .Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 10 (LEFT) and 11 (RIGHT)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156551
91156551340
91156551440
90156551342
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Select side
Prices from: €51.09 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
90156593041
Product Information
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Diagram Ref: 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
The product you are viewing cross references to these numbers
Product Information
Rear of roll bar seal.Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Diagram Ref: 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
90156593041
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€49.61 inc. VAT
Now €44.65 inc. VAT
Due In 15 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90156593041/8
Product Information
The rear window to roll bar seal acts as a critical weather barrier, preventing water, wind, and road debris from entering the cabin around the rear glass area. It also helps reduce wind noise and ensures that the Targa top assembly fits cleanly and snugly, maintaining the iconic look and function of the Porsche Targa design.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Diagram ref no 23
• Application: Fits rear glass to roll bar sealing interface on classic Targa cars. One seal per car. Designed to match original factory dimensions and mounting locations for a direct replacement fit.
• Function: Weatherproofing between rear glass & roll bar
• Benefits: Prevents leaks, reduces noise, restores original fit & finish
Installed along the top edge of the rear glass where it meets the Targa roll bar, this gasket provides a consistent sealing surface that keeps out moisture and airflow while preserving the structural integrity and classic silhouette of your Porsche. It supports long-term durability for road driving and contributes to the car’s overall comfort and weather resistance.
Over time, the original rear window seal can harden, crack, or compress due to aging, UV radiation, and temperature fluctuations. When the seal isn't functioning properly, moisture can leak into or into the cabin, causing water spots, fogging, and potential corrosion. Replacing this seal with a new, high-quality seal restores proper weather protection, keeps the interior dry and quiet, and helps preserve the value and authenticity of your classic Porsche.
Replace the rear Targa roll bar seal if you notice:
• Cracks, splits, or visible hardening of the seal
• Water leaks or dampness around the rear window
• Increased wind noise at higher speeds
• Loose or compressed seal no longer providing firm contact
• During restoration or Targa top refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
The product you are viewing cross references to these numbers
Product Information
Rear of roll bar seal.The rear window to roll bar seal acts as a critical weather barrier, preventing water, wind, and road debris from entering the cabin around the rear glass area. It also helps reduce wind noise and ensures that the Targa top assembly fits cleanly and snugly, maintaining the iconic look and function of the Porsche Targa design.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Diagram ref no 23
• Application: Fits rear glass to roll bar sealing interface on classic Targa cars. One seal per car. Designed to match original factory dimensions and mounting locations for a direct replacement fit.
• Function: Weatherproofing between rear glass & roll bar
• Benefits: Prevents leaks, reduces noise, restores original fit & finish
Installed along the top edge of the rear glass where it meets the Targa roll bar, this gasket provides a consistent sealing surface that keeps out moisture and airflow while preserving the structural integrity and classic silhouette of your Porsche. It supports long-term durability for road driving and contributes to the car’s overall comfort and weather resistance.
Over time, the original rear window seal can harden, crack, or compress due to aging, UV radiation, and temperature fluctuations. When the seal isn't functioning properly, moisture can leak into or into the cabin, causing water spots, fogging, and potential corrosion. Replacing this seal with a new, high-quality seal restores proper weather protection, keeps the interior dry and quiet, and helps preserve the value and authenticity of your classic Porsche.
Replace the rear Targa roll bar seal if you notice:
• Cracks, splits, or visible hardening of the seal
• Water leaks or dampness around the rear window
• Increased wind noise at higher speeds
• Loose or compressed seal no longer providing firm contact
• During restoration or Targa top refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
90156593041
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€22.17 inc. VAT
Now €19.95 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90156509145
Product Information
Fits:
Porsche 911 1970-73
Diagram Ref: 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
Product Information
Rear roll bar seal for Porsche Targa models Fits:
Porsche 911 1970-73
Diagram Ref: 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€392.04 inc. VAT
Now €352.84 inc. VAT
Stock Due - No Delivery Date
Shop Securely
12 Month Warranty
Worldwide Delivery
90156509145/1
Product Information
This seal installs along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body of the car. Manufactured as an OE Match replacement, the seal replicates the original Porsche profile and fitment to ensure proper roof sealing and factory-correct installation.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The rear roll bar seal sits on the top front edge of the Targa roll bar and forms the contact surface where the roof panel rests.
The OE Match version reproduces the original Porsche rubber gasket in both shape and material quality, providing the correct compression needed to achieve a watertight seal when the roof panel is installed.
The seal prevents water, wind and dust from entering the cabin through the roof-to-body junction. It also stabilises the roof panel and reduces wind noise by maintaining proper contact between the removable roof section and the roll bar.
Replacing worn seals restores the proper weatherproofing and comfort expected from the Targa roof system.
Over time the original rubber seals can harden, shrink or crack due to age, UV exposure and temperature changes. When the seal deteriorates, water leaks and wind noise may develop around the Targa roof area. Installing a new OE Match seal restores proper sealing performance and helps maintain a dry and comfortable interior.
Replace the rear roll bar seal if you notice:
• Water leaks from the Targa roof area
• Increased wind noise when driving
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
Product Information
Rear roll bar seal for Porsche Targa models This seal installs along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body of the car. Manufactured as an OE Match replacement, the seal replicates the original Porsche profile and fitment to ensure proper roof sealing and factory-correct installation.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The rear roll bar seal sits on the top front edge of the Targa roll bar and forms the contact surface where the roof panel rests.
The OE Match version reproduces the original Porsche rubber gasket in both shape and material quality, providing the correct compression needed to achieve a watertight seal when the roof panel is installed.
The seal prevents water, wind and dust from entering the cabin through the roof-to-body junction. It also stabilises the roof panel and reduces wind noise by maintaining proper contact between the removable roof section and the roll bar.
Replacing worn seals restores the proper weatherproofing and comfort expected from the Targa roof system.
Over time the original rubber seals can harden, shrink or crack due to age, UV exposure and temperature changes. When the seal deteriorates, water leaks and wind noise may develop around the Targa roof area. Installing a new OE Match seal restores proper sealing performance and helps maintain a dry and comfortable interior.
Replace the rear roll bar seal if you notice:
• Water leaks from the Targa roof area
• Increased wind noise when driving
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€146.25 inc. VAT
Now €131.62 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90156509145/8
Product Information
The OE Match rear roll bar seal is a weather-sealing component designed for Porsche 911 Targa models from 1970 to 1973. This rubber seal is installed along the front edge of the Targa roll bar, forming the sealing interface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The Targa roof system used on classic Porsche 911 models features a removable roof panel and a fixed roll bar behind the seats. The rear roll bar seal sits on the top/front face of the Targa roll bar, creating a tight sealing surface where the removable roof panel meets the body.
The OE Match version reproduces the original rubber gasket used by Porsche, ensuring the correct shape and compression required for proper roof sealing on early 911 Targa models.
This seal prevents water, wind and dust from entering the cabin at the junction between the removable roof section and the roll bar. It also reduces wind noise and helps maintain a tight, stable fit of the Targa roof panel during driving.
Replacing worn seals restores proper weatherproofing and improves cabin comfort.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Roof seals are exposed to sunlight, temperature changes and compression over decades of use. Over time the rubber can harden, shrink or crack, reducing its ability to seal properly and allowing water leaks or wind noise into the cabin. Replacing the seal restores proper roof sealing and helps preserve the interior of the vehicle.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
Product Information
Rear roll bar seal for Porsche Targa models The OE Match rear roll bar seal is a weather-sealing component designed for Porsche 911 Targa models from 1970 to 1973. This rubber seal is installed along the front edge of the Targa roll bar, forming the sealing interface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The Targa roof system used on classic Porsche 911 models features a removable roof panel and a fixed roll bar behind the seats. The rear roll bar seal sits on the top/front face of the Targa roll bar, creating a tight sealing surface where the removable roof panel meets the body.
The OE Match version reproduces the original rubber gasket used by Porsche, ensuring the correct shape and compression required for proper roof sealing on early 911 Targa models.
This seal prevents water, wind and dust from entering the cabin at the junction between the removable roof section and the roll bar. It also reduces wind noise and helps maintain a tight, stable fit of the Targa roof panel during driving.
Replacing worn seals restores proper weatherproofing and improves cabin comfort.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Roof seals are exposed to sunlight, temperature changes and compression over decades of use. Over time the rubber can harden, shrink or crack, reducing its ability to seal properly and allowing water leaks or wind noise into the cabin. Replacing the seal restores proper roof sealing and helps preserve the interior of the vehicle.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€186.03 inc. VAT
Now €167.43 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90156591440
Product Information
Fits:
Porsche 911/912 Targa 1965-69
Porsche 911 Targa 1970-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 43
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156591440
The product you are viewing cross references to these numbers
Product Information
Targa Soft Window Rear Bar Seal.Fits:
Porsche 911/912 Targa 1965-69
Porsche 911 Targa 1970-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 43
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156591440
90156591440
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€353.63 inc. VAT
Now €318.27 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90156500001
Product Information
Our Targa Top Restoration Kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your targa top back to factory new condition.
We use the original German materials that exactly match Stüttgart factory specifications; deep grain vinyl roof skin, foam backed nylon headlining, densely woven linen backing cloth and insulation material. All materials are precision cut, edge bound and pre-formed to guarantee a factory authentic fit.
The kit does not include any hardware or weatherstrips. However these can be re-used in most cases.
The kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of a home mechanic.
Fits:
Porsche 912
Porsche 911 1965-89
Porsche 964 1989-94
Targa Top Instructions CLICK HERE
Targa Top Restoration CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156500001
The product you are viewing cross references to these numbers
Product Information
Complete Targa Top Restoration Kit for your Porsche 911 from 1964 through 1993.Our Targa Top Restoration Kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your targa top back to factory new condition.
We use the original German materials that exactly match Stüttgart factory specifications; deep grain vinyl roof skin, foam backed nylon headlining, densely woven linen backing cloth and insulation material. All materials are precision cut, edge bound and pre-formed to guarantee a factory authentic fit.
The kit does not include any hardware or weatherstrips. However these can be re-used in most cases.
The kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of a home mechanic.
Fits:
Porsche 912
Porsche 911 1965-89
Porsche 964 1989-94
Targa Top Instructions CLICK HERE
Targa Top Restoration CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156500001
90156500001
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€438.75 inc. VAT
Now €394.87 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90156503541/1
Product Information
The outer cover does not include any hardware or weatherstrips. However these can be re-used in most cases.
Requires a specialist to fit this product.
Fits:
Porsche 912
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Delivery Time is Normally 10 - 14 days on this product
This cover renews the outer finish of the Targa roof - helping restore a clean, factory-style appearance while providing a refreshed outer layer that supports weather protection and reduces wind/water issues associated with aged, split, or shrinking original coverings.
• Replaces the worn or damaged outer skin of the Targa roof panel
• Helps maintain a weather-resistant exterior surface
• Restores the correct look/texture for a tidy, OE-style roof finish
Over time, Targa outer skins can fade, crack, shrink, lift at edges, or lose their seal, affecting both appearance and weather resistance. Replacing the outer cover is a key step in a proper Targa roof restoration, helping bring back the correct finish and improving overall roof integrity.
When to replace:
• Visible cracking, splitting, or lifting of the outer skin
• Persistent wind noise or water issues traced to roof covering condition
• Faded, scuffed, or poorly repaired outer surface
• During a full Targa top restoration/retrim
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156503541
The product you are viewing cross references to these numbers
Product Information
Targa top restoration outer cover, for your Porsche 911 from 1964 through 1993.The outer cover does not include any hardware or weatherstrips. However these can be re-used in most cases.
Requires a specialist to fit this product.
Fits:
Porsche 912
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Delivery Time is Normally 10 - 14 days on this product
This cover renews the outer finish of the Targa roof - helping restore a clean, factory-style appearance while providing a refreshed outer layer that supports weather protection and reduces wind/water issues associated with aged, split, or shrinking original coverings.
• Replaces the worn or damaged outer skin of the Targa roof panel
• Helps maintain a weather-resistant exterior surface
• Restores the correct look/texture for a tidy, OE-style roof finish
Over time, Targa outer skins can fade, crack, shrink, lift at edges, or lose their seal, affecting both appearance and weather resistance. Replacing the outer cover is a key step in a proper Targa roof restoration, helping bring back the correct finish and improving overall roof integrity.
When to replace:
• Visible cracking, splitting, or lifting of the outer skin
• Persistent wind noise or water issues traced to roof covering condition
• Faded, scuffed, or poorly repaired outer surface
• During a full Targa top restoration/retrim
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156503541
90156503541
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€146.25 inc. VAT
Now €131.62 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
9115652
Product Information
The Targa side roof seal is designed to restore proper weather sealing along the side edge of the removable Targa roof panel on classic Porsche 911 models. This precision-moulded rubber seal fits between the Targa top and the side window frame, creating a tight barrier that prevents wind, water, and road noise from entering the cabin.
Fits:
Porsche 911 1970 - 1989
Diagram ref no 45
Old Targa roof seals commonly fail due to UV exposure, compression set, and age. A damaged seal can lead to:
• Water ingress into interior trim and carpets
• Excessive wind noise or whistling
• Poor window alignment and rattles
• Reduced roof stability and overall cabin comfort.
Replacing the seal restores a tight, clean Targa-top closure and protects the interior from the elements.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
The product you are viewing cross references to these numbers
Product Information
Targa Top lateral / horizontal Seal, Fits over door drop glass complete with internal metal insert.The Targa side roof seal is designed to restore proper weather sealing along the side edge of the removable Targa roof panel on classic Porsche 911 models. This precision-moulded rubber seal fits between the Targa top and the side window frame, creating a tight barrier that prevents wind, water, and road noise from entering the cabin.
Fits:
Porsche 911 1970 - 1989
Diagram ref no 45
Old Targa roof seals commonly fail due to UV exposure, compression set, and age. A damaged seal can lead to:
• Water ingress into interior trim and carpets
• Excessive wind noise or whistling
• Poor window alignment and rattles
• Reduced roof stability and overall cabin comfort.
Replacing the seal restores a tight, clean Targa-top closure and protects the interior from the elements.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
91156525940
91156526040
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Select below
Prices from: €170.06 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
9115652
Product Information
Fits:
Porsche 911 1970-89
Diagram Ref: 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
The product you are viewing cross references to these numbers
Product Information
Targa top lateral / horizontal seal, Fits over door drop glass complete with internal metal insert.Fits:
Porsche 911 1970-89
Diagram Ref: 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
91156525940
91156526040
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Select below
Prices from: €248.32 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
9115652
Product Information
Fits:
Porsche 911 1970-89
Diagram Ref: 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
The product you are viewing cross references to these numbers
Product Information
Targa top lateral / horizontal seal, Fits over door drop glass complete with internal metal insert.Fits:
Porsche 911 1970-89
Diagram Ref: 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9115652
91156525940
91156526040
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Select below
Prices from: €93.72 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
About Targa Top Seals
Targa Top Seals - Precision Weather Sealing for Wind, Water & Noise Protection
Targa top seals are essential components that maintain the watertight and airtight integrity of your Porsche’s removable roof system. Designed to fit around the roof edges, side glass, and windscreen frame, these seals prevent wind noise, vibration, and water ingress — ensuring a quiet, comfortable, and leak-free driving experience. Over time, environmental exposure and repeated compression cause rubber seals to harden, crack, or shrink, making replacement crucial to preserve cabin comfort and vehicle protection.
At Design911, we offer a premium range of Targa top seals engineered for exact fitment, flexibility, and long-lasting performance. Each seal is crafted from high-grade rubber compounds resistant to UV, ozone, and temperature extremes, ensuring a perfect fit and dependable sealing for years to come. Whether for restoration, maintenance, or weatherproofing upgrades, our seals deliver the precision and durability expected by Porsche enthusiasts worldwide.
What Do Targa Top Seals Do?
Targa top seals are designed to create a continuous barrier between the removable roof panel and the bodywork, protecting against external elements.
Core Functions:
• Prevent water, wind, and dust from entering the cabin.
• Reduce wind noise and vibration at high speeds.
• Maintain proper roof alignment and pressure sealing.
• Protect interior trim and electronics from moisture damage.
• Ensure long-term comfort, safety, and weather resistance.
Properly fitted seals are key to preserving the driving refinement and structural integrity that make the Porsche Targa experience unique.
Why Do Targa Top Seals Fail or Degrade?
Exposure to sunlight, heat cycles, and movement over time can cause rubber materials to lose flexibility and sealing strength.
Common Causes of Failure Include:
• UV and ozone exposure causing hardening and cracking.
• Compression set from repeated roof removal or long-term storage.
• Deformation or shrinkage due to temperature fluctuations.
• Water or dirt contamination leading to surface wear.
• Improper alignment or fitting causing gaps and leaks.
When seals fail, symptoms include increased wind noise, water leaks, rattling panels, and a loose roof fit — all of which impact comfort and performance.
Why Replace or Upgrade Your Porsche Targa Top Seals?
Replacing deteriorated seals restores your Targa’s original refinement and weather protection. Design911’s precision-engineered rubber seals are crafted to match Porsche specifications, ensuring perfect fitment and long-lasting flexibility.
Key Benefits:
• Restores watertight and windproof sealing.
• Reduces cabin noise and roof vibration.
• Protects interior from leaks and corrosion.
• Made from premium, UV- and ozone-resistant rubber.
• Direct-fit design for classic and modern Targa models.
• Ideal for restorations, maintenance, or noise reduction upgrades.
Design911’s targa top seals combine precision engineering and superior materials — preserving the comfort, appearance, and value of your vehicle.
Highlights
• High-quality Porsche Targa top rubber seals.
• Designed for perfect roof and body alignment.
• UV- and weather-resistant rubber construction.
• Reduces wind noise and prevents leaks.
• Suitable for both classic and modern Targa models.
• Ideal for restorations and long-term maintenance.
You may also like
-
Rubber Seal Packages
-
Door Seals
-
Bumper Front Seals
-
Bumper Rear Seals
-
Side Sill Seals
-
Cabrio Hood Seals
-
Sunroof Seals
-
Rear Spoiler Seals
-
Bonnet / Boot Seals
-
Engine Compartment Seals
-
Pedal Rubbers
-
Wing to Panel Seals
-
Rubbers & Mouldings Car Kits
-
Front Screen
-
Rear Screen
-
Door Glass
-
Rear ¼ Glass
-
Light Seals
Popular Models
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information