do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Porsche
Porsche for Porsche
Porsche genuine parts and lifestyle products for Porsche models from Design911.
A Quick Look at Porsche
Porsche information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Porsche is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these parts include maintaining originality, keeping factory specification, and choosing the latest genuine revisions for peace of mind.
- Common real-world issues behind many Porsche repairs are age and mileage: oil leaks, cooling system fatigue, brake and suspension wear, corrosion and electrical faults from moisture or heat cycling.
- Before ordering, confirm part numbers against VIN or option/PR codes, especially for safety‑critical or complex components.
- When upgrading, decide whether you want pure originality or performance changes, as some aftermarket options may suit specific goals better than genuine.
- For bigger jobs, replace related seals, hardware and consumables at the same time to avoid repeat labour and compatibility issues.
- Where available, follow the manufacturer’s fitting and bedding‑in guidance to get the best performance and longevity.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include: Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check whether the parts are OE-equivalent replacements or performance upgrades and match this to how the Porsche is used.
- Follow any recommended bedding-in procedure and consider replacing discs, pads, sensors and fitting hardware together where advised.
Clothing & Gifts — Porsche-themed clothing and gifts let owners and enthusiasts show their passion off the road, or make ideal presents for fans of the marque. Common symptoms include: Items may become worn, faded, damaged or go out of style, prompting replacement with newer designs.
- Review available size, colour and material details to help choose the right item and ensure it matches how it will be used.
- Check any care or washing guidance so garments and accessories keep their appearance for longer.
Lifestyle — To explore different Porsche-inspired lifestyle products or gift ideas. Common symptoms include: General wear from handling or display.
- Confirm whether items are official Porsche lifestyle products or from trusted partner brands where stated.
- Consider who the item is for and how it will be used day to day to select the most suitable style or product type.
Keyring — To choose a different design, material or model theme. Common symptoms include: Scratches, worn finishes or loose fittings.
- Keyrings make simple, practical Porsche-themed gifts and can be matched to specific models or heritage designs where available.
- If a keyring shows damage or looseness, replace it to avoid losing keys or further wear to finishes.
Size chart — The size chart acts as a practical reference tool for all apparel purchases. Common symptoms include:
Explore Porsche at Design911
View the current Porsche range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
This genuine Porsche weather seal is designed for the B-pillar of Porsche 911 Cabriolet models. It forms the factory seal between the convertible top and the vertical B-pillar, ensuring proper sealing and alignment when the top is raised.
Fits:
Porsche 911 1974 - 1985
Diagram Ref: 16
Original Porsche Equipment (OE) weather seals specifically engineered to the original factory specifications used on Porsche 911 Cabriolets primarily from 1974 to 1985. Each seal is crafted to match the unique profile, length, and compression characteristics required to seal the Cabriolet top area reliably.
These seals fill the gap between the vertical B-pillar and the adjacent convertible top/window interface, maintaining a snug, weather-tight barrier. Their primary role is to prevent wind noise, water leaks, dust ingress, and drafts from entering the passenger compartment along the side window and roof seam - common problem areas on older soft-top cars.
Old B-pillar seals commonly:
• Crack or shrink, leaving gaps
• Harden, causing poor sealing and excessive wind noise
• Fail to contact the window glass properly
• Lead to water leaks and wet carpets
• Ruin the otherwise clean look of the Cabriolet roof area
Replacing them restores:
• Proper sealing performance
• Quieter and more comfortable cabin
• Protection from rain and drafts
• A factory-correct Cabriolet appearance
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156122
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148&format=webp "Seal ring thermostat housing. Porsche 958 Cayenne 3.6ltr - WHT000863")
Thermostat Housing Seal Ring for Porsche 958 Cayenne 3.6L – Essential Cooling System Sealing Component
This thermostat housing seal ring is designed
specifically for the Porsche 958 Cayenne 3.6-litre engine, providing a
critical seal between the thermostat and its housing. Its role is to maintain
system pressure and prevent coolant leaks, ensuring the engine operates within
its correct temperature range under all driving conditions.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
Diagram ref no 11
Even though it is a small component, the thermostat housing seal ring plays a major role in cooling system reliability. Over time, heat cycling, coolant exposure and age can cause the seal to harden, flatten or crack—leading to coolant leaks, pressure loss and potential overheating. Replacing the seal during thermostat service or cooling system repairs is essential preventative maintenance.
What the Thermostat Housing Seal Ring Does
This sealing ring:
- Creates
a watertight seal between the thermostat and housing
- Maintains correct cooling system pressure
- Prevents
coolant leaks during engine operation
- Supports accurate thermostat function
- Ensures stable engine temperature regulation
A properly sealing thermostat housing is vital for efficient cooling performance.
Why Thermostat Housing Seal Rings Fail
Common causes of failure include:
- Heat
cycling, causing the seal to harden or lose elasticity
- Coolant
chemical exposure, degrading the sealing material
- Compression
set, where the seal flattens over time
- Improper
installation, leading to pinching or distortion
- Age-related material fatigue, especially on higher-mileage vehicles
Symptoms often include coolant residue around the housing, low coolant warnings or unexplained coolant loss.
Why the Seal Ring Should Be Replaced
Replacing the thermostat housing seal ring provides:
- Restored leak-free cooling system operation
- Correct
pressure retention for efficient coolant flow
- Prevention of overheating and engine stress
- Reliable sealing after thermostat replacement
- Low-cost protection against expensive cooling repairs
It is strongly recommended to replace the seal ring whenever the thermostat is removed or serviced.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WHT000863
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Yellow-green / Pink
Fits:
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
* for cars with Sport suspension (option code: 030)
* for cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
A genuine Porsche front coil spring pair, manufactured to Porsche’s exact OEM specifications for vehicles fitted with M030/M031 sports suspension. This set includes two front springs, intended to be installed together to maintain correct suspension balance and geometry.
These springs support the full front axle load while controlling body movement during braking, acceleration, and cornering. Designed specifically for sport suspension setups, they provide sharper handling response, reduced body roll, and a more controlled ride compared to standard suspension springs.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Their sport-tuned spring rates work in harmony with Porsche dampers to absorb road inputs while maintaining increased stability, steering precision, and performance-oriented ride characteristics.
Front coil springs in M030/M031 sports suspension systems are tuned for precise handling and ride height. Over time, constant load, aggressive driving, and road impacts can cause springs to weaken or sag, affecting suspension geometry and performance. Replacing worn springs restores factory ride height, handling balance, and the sharp driving characteristics Porsche intended.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• During shock/strut replacement on M030/M031-equipped vehicles
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353133504
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Yellow-Green / Brown
Fits:
Porsche 991.1 Carrera 2 / 2S / GTS 2012 - 2016 Coupe
* For cars with Sports suspension (option code: 030)
* For cars with Sports chassis with PASM and PDCC (option code: 031)
Diagram ref no 10
A genuine Porsche front coil spring pair, manufactured to Porsche’s exact OEM standards for material quality, dimensional accuracy, and durability. This set includes two front springs, designed to be installed together on the front axle.
These springs support the full front axle load and regulate suspension movement during braking, acceleration, and cornering. Replacing both springs as a matched pair ensures even ride height, correct weight distribution, and consistent handling response.
Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely tuned spring rates work in harmony with Porsche dampers to absorb road impacts, stabilise the vehicle body, and maintain accurate steering and tyre contact.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353108504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Zinc Yellow / Light blue
Fits:
Porsche 991.1 Carrera 4 / 4S / 4 GTS 2012 - 2016
Porsche 991.1 Targa 4 GTS 2012 - 2016
* For cars with Standard chassis (option code: 029)
Diagram ref no 10
A genuine Porsche front coil spring pair, manufactured to Porsche’s exact OEM standards for material quality, dimensional accuracy, and durability. This set includes two front springs, designed to be installed together on the front axle.
These springs support the full front axle load and regulate suspension movement during braking, acceleration, and cornering. Replacing both springs as a matched pair ensures even ride height, correct weight distribution, and consistent handling response.
Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely tuned spring rates work in harmony with Porsche dampers to absorb road impacts, stabilise the vehicle body, and maintain accurate steering and tyre contact.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353123504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Light Blue / Brown
Fits:
Porsche 991.1 Carrera 2 / 2S 2012 - 2016
Porsche 991.2 Carrera 2 / 2S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
A genuine Porsche front suspension coil spring, manufactured to OEM standards for material quality, dimensional accuracy, and durability. This spring is designed to integrate seamlessly with factory dampers and suspension components.
The coil spring supports the front axle load and controls vertical suspension movement during braking, acceleration, and cornering. It helps maintain correct ride height, balanced weight distribution, and predictable handling response.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Their sport-tuned spring rates work in harmony with Porsche dampers to absorb road inputs while maintaining increased stability, steering precision, and performance-oriented ride characteristics.
Over time, constant load, aggressive driving, and road impacts can cause springs to weaken or sag, affecting suspension geometry and performance. Replacing worn springs restores factory ride height, handling balance, and the sharp driving characteristics Porsche intended.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353130504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Pure White / Zinc Yellow
Fits:
Porsche 991.1 Carrera 4 / 4S 2012 - 2016
Porsche 991.1 Targa 4 / 4S 2012 - 2016
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
Porsche 991.2 Targa 4 / 4S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
AA genuine Porsche front suspension coil spring, manufactured to OEM standards for material quality, dimensional accuracy, and durability. This spring is designed to integrate seamlessly with factory dampers and suspension components.
The coil spring supports the front axle load and controls vertical suspension movement during braking, acceleration, and cornering. It helps maintain correct ride height, balanced weight distribution, and predictable handling response.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Their sport-tuned spring rates work in harmony with Porsche dampers to absorb road inputs while maintaining increased stability, steering precision, and performance-oriented ride characteristics.
Over time, constant load, aggressive driving, and road impacts can cause springs to weaken or sag, affecting suspension geometry and performance. Replacing worn springs restores factory ride height, handling balance, and the sharp driving characteristics Porsche intended.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353131504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Yellow-green / Fire red
Fits:
Porsche 991.2 Carrera 2 / 2S 10.12.2016 - 2019
* for cars with Sport suspension (option code: 030)
* for cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
A genuine Porsche front coil spring pair, manufactured to Porsche’s exact OEM specifications for vehicles fitted with M030/M031 sports suspension. This set includes two front springs, intended to be installed together to maintain correct suspension balance and geometry.
These springs support the full front axle load while controlling body movement during braking, acceleration, and cornering. Designed specifically for sport suspension setups, they provide sharper handling response, reduced body roll, and a more controlled ride compared to standard suspension springs.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Their sport-tuned spring rates work in harmony with Porsche dampers to absorb road inputs while maintaining increased stability, steering precision, and performance-oriented ride characteristics.
Front coil springs in M030/M031 sports suspension systems are tuned for precise handling and ride height. Over time, constant load, aggressive driving, and road impacts can cause springs to weaken or sag, affecting suspension geometry and performance. Replacing worn springs restores factory ride height, handling balance, and the sharp driving characteristics Porsche intended.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• During shock/strut replacement on M030/M031-equipped vehicles
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353132504
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Light Blue
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 2 / GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
A genuine Porsche front coil spring set, includes two front coil springs, intended to be installed together on the front axle to maintain correct suspension balance and geometry.
These springs support the full front axle load and control suspension movement during braking, acceleration, and cornering. By replacing both springs as a matched pair, they ensure consistent ride height, even load distribution, and factory-correct handling characteristics.
Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely calibrated spring rates work in harmony with Porsche dampers to absorb road impacts, stabilize the vehicle body, and maintain optimal tire contact and steering precision.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Yellow-green
Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 4 GTS 2024 >>
Porsche 992.2 (911) Targa 4 GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
A genuine Porsche front coil spring set, includes two front coil springs, intended to be installed together on the front axle to maintain correct suspension balance and geometry.
These springs support the full front axle load and control suspension movement during braking, acceleration, and cornering. By replacing both springs as a matched pair, they ensure consistent ride height, even load distribution, and factory-correct handling characteristics.
Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely calibrated spring rates work in harmony with Porsche dampers to absorb road impacts, stabilize the vehicle body, and maintain optimal tire contact and steering precision.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105A504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Silver / Red lilac
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
* For 'Special edition' models (option code: E0W)
* For cars with and without adaptive suspension
* For cars with Sports suspension (option code: 1BV)
Diagram ref no 5
This set includes two front springs, intended to be installed together on the front axle.
These springs support the full front axle load while controlling suspension movement during braking, acceleration, and cornering. By replacing both springs simultaneously, the set ensures balanced ride height, consistent handling response, and factory-correct suspension geometry.
Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel, absorbing road impacts and stabilizing the vehicle body. Their precisely calibrated spring rates work in harmony with Porsche dampers to maintain optimal tire contact, steering precision, and ride quality.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105AD504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Squirrel Grey
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
* For cars with and without adaptive suspension
* For cars with Sports equipment (option code: A8F)
* For cars with Sports suspension (option code: 1BV)
* including Special edition models (option code: E0E) with Comfort equipment (option code: A8C)
Diagram ref no 5
This front coil spring supports the vehicle’s weight and helps control body movement by storing and releasing energy as the suspension travels. It works in concert with shock absorbers and other suspension components to deliver stable handling, responsive steering, and a balanced ride quality characteristic of Porsche vehicles.
Installed between the lower control arm and the front strut or shock assembly, the coil spring compresses and extends as the wheel moves over road surfaces. It absorbs vertical motion, helps maintain tire contact with the road, and contributes to overall vehicle stability, comfort, and performance.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105B504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 (911) Dakar 3.0L 2023-24
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Pure White
Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
* For cars with and without adaptive suspension
* For cars with Sports equipment (option code: A8F)
* For cars with Sports suspension (option code: 1BV)
Diagram ref no 5
This front coil spring supports the vehicle’s weight and helps control body movement by storing and releasing energy as the suspension travels. It works in concert with shock absorbers and other suspension components to deliver stable handling, responsive steering, and a balanced ride quality characteristic of Porsche vehicles.
Installed between the lower control arm and the front strut or shock assembly, the coil spring compresses and extends as the wheel moves over road surfaces. It absorbs vertical motion, helps maintain tire contact with the road, and contributes to overall vehicle stability, comfort, and performance.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105C504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Shop Securely
12 Month Warranty
Worldwide Delivery
The springs are priced / boxed as a pair.
Identification paint coloured marking Silver / Yellow-Green
Fits:
Porsche 992.1 (911) 3.0L 2023 - 2024 DAKAR
* For cars with Standard suspension (option code: 1BM)
* Chassis with increased ride height 2 (option code: 2UM)
Diagram ref no 5
This front coil spring supports the vehicle’s weight and helps control body movement by storing and releasing energy as the suspension travels. It works in concert with shock absorbers and other suspension components to deliver stable handling, responsive steering, and a balanced ride quality characteristic of Porsche vehicles.
Installed between the lower control arm and the front strut or shock assembly, the coil spring compresses and extends as the wheel moves over road surfaces. It absorbs vertical motion, helps maintain tire contact with the road, and contributes to overall vehicle stability, comfort, and performance.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105H504
The product you are viewing cross references to these numbers
- Porsche 992.1 (911) Dakar 3.0L 2023-24
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
Fits:
·
Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
·
Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
·
Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
·
Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
·
Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
·
Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp)
2016-19
·
Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
·
Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp)
2016-19
·
Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
·
Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
incl. cars with sport exhaust system
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1251571
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 991.1 Carrera 3.4L / 3.8L 2017-19
incl. cars with sport exhaust system
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99111148101
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed