Front Spoilers / Bumpers

Manthey Performance Aerokit for cars with 20/21 inch GT2 RS magnesium wheel set



Fits:
Porsche 991.2 GT3 RS - 2017 Onwards
Only for cars with 20/21 inch GT2 RS magnesium wheel set

The Manthey Kit for the 991.2 GT3 RS was developed in close collaboration between the Porsche Development Centre in Weissach and Manthey-Racing GmbH. Thanks to coordinated suspension, aerodynamic and brake components, the breathtaking performance of the 911 GT3 RS has been tuned even more precisely to the demands of trackdays and tourist drives.

Put it another way: 6:54.340 minutes for the 20.8-kilometre Nürburgring-Nordschleife. In this impressive time, Porsche works driver Kévin Estre lapped the "Green Hell" in a GT3 RS with an identical kit in April 2021.

Aerodynamics package

The downforce of the vehicle is increased by installing various components, including additional air baffle elements in the area of the front wheels, flaps on the front apron and a new rear wing of carbon. Aerodiscs on the rear wheels, also made of carbon, reduce turbulence in the rear of the vehicle and further increase aerodynamic efficiency. To accommodate the higher aero load caused by the rear wing, the rigidity at the rear end has been massively increased. The rear wing itself is connected directly to the body with the help of special supports (in the GT3 RS without Manthey Kit, the wing is attached to the rear lid). Among other things, the aerodynamics package was tested in the wind tunnel in Weissach, which remains one of the most modern of its kind: The blower with a diameter of eight metres has extremely lightweight carbon blades and can generate wind speeds of up to 300 km/h (186 mph) on the tested vehicle in the measurement area.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991044805

The product you are viewing cross references to these numbers

Manthey Performance Aerokit for cars with 20/21 inch GT3 RS Wheel Set



Fits:
Porsche 991.2 GT3 RS - 2017 Onwards
Only for cars with 20/21 inch GT3 RS Wheel Set

The Manthey Kit for the 991.2 GT3 RS was developed in close collaboration between the Porsche Development Centre in Weissach and Manthey-Racing GmbH. Thanks to coordinated suspension, aerodynamic and brake components, the breathtaking performance of the 911 GT3 RS has been tuned even more precisely to the demands of trackdays and tourist drives.

Put it another way: 6:54.340 minutes for the 20.8-kilometre Nürburgring-Nordschleife. In this impressive time, Porsche works driver Kévin Estre lapped the "Green Hell" in a GT3 RS with an identical kit in April 2021.

Aerodynamics package

The downforce of the vehicle is increased by installing various components, including additional air baffle elements in the area of the front wheels, flaps on the front apron and a new rear wing of carbon. Aerodiscs on the rear wheels, also made of carbon, reduce turbulence in the rear of the vehicle and further increase aerodynamic efficiency. To accommodate the higher aero load caused by the rear wing, the rigidity at the rear end has been massively increased. The rear wing itself is connected directly to the body with the help of special supports (in the GT3 RS without Manthey Kit, the wing is attached to the rear lid). Among other things, the aerodynamics package was tested in the wind tunnel in Weissach, which remains one of the most modern of its kind: The blower with a diameter of eight metres has extremely lightweight carbon blades and can generate wind speeds of up to 300 km/h (186 mph) on the tested vehicle in the measurement area.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991044805

The product you are viewing cross references to these numbers

Reinforcement plate front lower spoiler mounting. 

Fits:
Porsche 991.2 turbo - 2017 to 2019

For cars with Option Codes
XAF - turbo Aerokit
XAV - Aerokit, turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150598

The product you are viewing cross references to these numbers

Rennline front bumper lip spoiler carbon fibre. 



Fits:
Porsche 991.2 Carrera 2 / Carrera 4 - 2016 to 2018

Porsche 991.2 Carrera 2S / Carrera 4S - 2016 to 2018
Porsche 991.2 Targa / Targa 4S - 2016 to 2018
Not for Wide Body Cars

Product Description

Rennline's carbon fiber front lip spoiler is a great way to give your 991 an eye-catching OEM+ upgrade. This carbon front lip was 3D scanned, designed and prototyped in house right here in Vermont. 
Made from hand-laid carbon fiber using the latest manufacturing technologies, our front lip will add a completely bespoke feel to your 991.

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Designed from the ground up using state of the art 3D scanning technology
• Fits all 991.2 Carrera Base/4/4S/S, Targa 4/4S models with standard bumpers
• Does not fit wide body cars
• OEM fit and finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E376

The product you are viewing cross references to these numbers

SportDesign package. Includes new front apron with new front spoiler and new extendible rear spoiler in a unique design. Please note: Significantly reduced approach/departure angle
For vehicles with headlight cleaning system and with front and rear ParkAssist



Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99104480373

The product you are viewing cross references to these numbers

TechArt carbon fibre front bumper air vent grille.

Fits:
Porsche 718 Boxster / Cayman - 2017>>
Porsche 991.1 / 991.2 - 2012>>

The TECHART air outlet grille is made from carbon fibre and fits into the the front bumper.

The carbon parts are made in TECHART's in-house carbon fibre shop and are available in matt or in glossy surface finish

Please note:
This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

09112118200

The product you are viewing cross references to these numbers

TechArt Carbon fibre front bumper grille airblades.

Fits:
Porsche 991.2 turbo
Porsche 991.2 turbo S

The airblade sits on the outer edge of the radiator inlet and runs across the top, housing the front lamp

Sold as a Pair and Available in Gloss or Matt Finish

Picture show airblades and aero wings

The carbon parts are made in TECHART's in-house carbon fibre shop

Please note:
This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

09112119700

The product you are viewing cross references to these numbers

TechArt Front bumper aero wings.

Fits:
Porsche 991.2 turbo
Porsche 991.2 turbo S

Aero wings are the angled, near vertical trims that straddle the horizontal trim bars and fit on the inner section the radiator inlet.

Sold as a pair and available in paintable PU material, gloss or matt carbon fibre

Picture show aero wings and airblades

The carbon parts are made in TECHART's in-house carbon fibre shop

Please note:
This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0911

The product you are viewing cross references to these numbers

TechArt front bumper top air vent grille

Fits:
Porsche 718 Boxster / Cayman - 2017>>
Porsche 991.1 / 991.2 - 2012>>

The TECHART air outlet grille is made from black PU-RIM material and fits into the the front bumper.

Please note:
This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

091100182009

The product you are viewing cross references to these numbers

Vorsteiner V-RS Aero Front Apron Carbon Fiber.
Material: Autoclaved 1×1 Pre-Preg Carbon Fiber
w/ UV Inhibiting Clear Lacquer Coating.

Fits:
Porsche 991 GT3 RS only

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POV1120

The product you are viewing cross references to these numbers

Vorsteiner V-RS Aero Wing Blade & End Caps.
Material: Autoclaved 1×1 Pre-Preg Carbon Fiber
w/ UV Inhibiting Clear Lacquer Coating.



Fits:
Porsche 991 GT3 RS only

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POV1170

The product you are viewing cross references to these numbers