Brembo Sport Brake Pads
Refine by Car Type
Filter by brand
BRAKEPADKIT987.F.BRES
Product Information
This Product Fits:
Porsche 987C S Cayman 06>> Front
Porsche 987 S Boxster 06>> Front
*Includes wire sensors & pin kit.
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEPADKIT987.F.BRES
The product you are viewing cross references to these numbers
Product Information
FRONT Brake pads, sensors, pin kit for Porsche Boxster S / Cayman S Brembo Sport
This Product Fits:
Porsche 987C S Cayman 06>> Front
Porsche 987 S Boxster 06>> Front
*Includes wire sensors & pin kit.
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEPADKIT987.F.BRES
23329
07.B314.15
07B31415
99635294903
99735193904
99661236501
99635195901
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Brake pad wear sensor. Porsche Boxster 986 / 996 / 996TT / 997 (99661236501/1
1 x Brake pad pin kit. Porsche 996 / Boxster 986 (99635195901/1
1 x Brembo Sport brake pads for Porsche 23329/ E2405/T5104 (OE Part No 99635294903 / 99735193904) (07B31415
Vehicle Group
Vehicle Group
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: €198.52 inc. VAT
Stock Due - No Delivery Date
04816450
Product Information
Product Information
Brembo Evo 500+ Brake Fluid 250mmReliability and high quality
Brembo Racing | SPORT | EVO 500++ brake fluid is ideal in all conditions, fit for all, from everyday driving to non-professional intermediate use on the track.
This is a reliable high quality fluid that improves pedal feel and consistent braking performance without the frequent inspection intervals of a full racing brake fluid.
Formulated for real enthusiasts
- Suitable for use in braking systems designed for non-mineral fluids.
- Purposely designed to meet the expectations of enthusiasts who demand a lot from their system.
- Exceeds the requirements of specification U.S. FMVSS No.116 DOT 3 and DOT 4, SAE J1703, SAE J1704 and ISO 4925 (classes 3 and 4).
- Compatible with other DOT 3, DOT 4 and DOT 5.1 brake fluids, as long as they comply with the above specification.
For safety reasons, it is recommended to replace your brake fluid at least once a year. Not Suitable for vehicles with mineral oil systems. Colour range: appearance from transparent to amber. In the case of new brake fluid, when poured out from the sealed bottle, the colour may differ from the range, but the performance remains the same.
Price: €12.46 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
04816420
Product Information
Product Information
Brembo HTC64T Racing Brake Fluid (500ml)This high temperature brake fluid designed for the most extreme racing conditions.
It has a dry boiling point of 335° C which is around 25° C higher than a typical racing brake fluid. Developed exclusively for competition use, Brembo HTC 64T provides the highest performance under all racing conditions and has been used in F1, ALMS, DTM, WRC and BTCC.
Very high dry boiling point (335°C) / Wet boiling point 203°C
Ideal for competition vehicles which experience high brake temperatures
Successfully used in top level Motorsport including F1
For maximum performance it is recommended that Brembo HTC 64T is not mixed with other brake fluids.
500ml Bottle
Please Note
Must not be used in brake systems containing magnesium parts
Price: €42.14 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
07B31514
Product Information
This Product Fits: Width: 112mm / Thickness: 16mm / Height: 73mm
Information about Brake Pad Size
This Product Fits:
Porsche 911 (996) 3.4L / 3.6L C2, C4 09.1997 - 08.2005 Rear Disc Diameter 299mm REAR
Porsche 911 (997) 3.6L Carrera, 3.6L Carrera 4 07.2004>> REAR
Porsche BOXSTER (986) 2.5L / 2.7L 08.1996 - 11.2004 REAR
Porsche BOXSTER (986) S 3.2L 08.1999 - 11.2004 REAR
Porsche BOXSTER (987) 2.7L / 2.9L 11.2004 - 12.2011 REAR
Porsche BOXSTER (987) S 3.2L / S 3.4L 07.2006 - 05.2009 REAR
Porsche CAYMAN (987) 2.7L 07.2006 - 12.2009 REAR
Porsche CAYMAN (987) R 3.4L, S 3.4L, S 3.4L Sport 11.2010 - 06.2013 REAR
Please also use brake pad sensor 98661236501/1 x 2
PLEASE NOTE:
If you require fitting kit for this please Click here
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31514
The product you are viewing cross references to these numbers
Product Information
This Product Fits: Width: 112mm / Thickness: 16mm / Height: 73mm
Information about Brake Pad Size
This Product Fits:
Porsche 911 (996) 3.4L / 3.6L C2, C4 09.1997 - 08.2005 Rear Disc Diameter 299mm REAR
Porsche 911 (997) 3.6L Carrera, 3.6L Carrera 4 07.2004>> REAR
Porsche BOXSTER (986) 2.5L / 2.7L 08.1996 - 11.2004 REAR
Porsche BOXSTER (986) S 3.2L 08.1999 - 11.2004 REAR
Porsche BOXSTER (987) 2.7L / 2.9L 11.2004 - 12.2011 REAR
Porsche BOXSTER (987) S 3.2L / S 3.4L 07.2006 - 05.2009 REAR
Porsche CAYMAN (987) 2.7L 07.2006 - 12.2009 REAR
Porsche CAYMAN (987) R 3.4L, S 3.4L, S 3.4L Sport 11.2010 - 06.2013 REAR
Please also use brake pad sensor 98661236501/1 x 2
PLEASE NOTE:
If you require fitting kit for this please Click here
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31514
99635293903
98635293910
98635293911
98735293900
99635293000
99635293003
99635293900
99635293902
99635298000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: €136.28 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
07B31418
Product Information
This Product Fits: Width: 114mm / Thickness: 16mm / Height: 78mm
Information about Brake Pad Size
This Product Fits:
Porsche 986 Boxster 2.5/2.7 1997-05 FRONT
Porsche 987 Boxster 2.7 2005>> FRONT
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31418
The product you are viewing cross references to these numbers
Product Information
This Product Fits: Width: 114mm / Thickness: 16mm / Height: 78mm
Information about Brake Pad Size
This Product Fits:
Porsche 986 Boxster 2.5/2.7 1997-05 FRONT
Porsche 987 Boxster 2.7 2005>> FRONT
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31418
98635193915
98635139311
98635193911
98635193913
98735193902
98735193903
98735193904
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman 2.9L 987C MKII 2009-12
Price: €155.55 inc. VAT
Stock Due - No Delivery Date
Shop Securely
12 Month Warranty
Worldwide Delivery
07B31415
Product Information
Information about Brake Pad Size
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 996 GT3 RS 02-05 Rear
For these pads also requires :
2x 99661236501 - Brake pad wear sensor
1x 99635195901 - Brake pad pin kit
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31415
The product you are viewing cross references to these numbers
Product Information
Brake Pad size: Width: 121mm / Thickness: 17mm / Height: 59mmInformation about Brake Pad Size
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 996 GT3 RS 02-05 Rear
For these pads also requires :
2x 99661236501 - Brake pad wear sensor
1x 99635195901 - Brake pad pin kit
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31415
99635294903
99735193904
99635294904
99735193906
99735193908
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche Cayman 2.9L 987C MKII 2009-12
Price: €165.19 inc. VAT
Stock Due - No Delivery Date
Shop Securely
12 Month Warranty
Worldwide Delivery
07B31486
Product Information
Brake Pad size: Width: 199mm / Thickness
19mm / Height: 67mm
Information about Brake Pad Size
This Product Fits:
Porsche 911 (991) 3.8L Carrera 4 09.2010-12.2011 FRONT
BOXSTER (981) 2.7L 195 04/2012 FRONT
BOXSTER (981) GTS 3.4L 243 02/2014 FRONT
BOXSTER (981) S 3.4L 232 04/2012 FRONT
BOXSTER Spyder (981) 3.8L 276 07/2015 FRONT
CAYMAN (981) 2.7L 202 03/2013 FRONT
CAYMAN (981) GTS 3.4L 250 02/2014 FRONT
CAYMAN (981) S 3.4L 239 03/2013 FRONT
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31486
The product you are viewing cross references to these numbers
Product Information
Brake Pad size: Width: 199mm / Thickness
19mm / Height: 67mm
Information about Brake Pad Size
This Product Fits:
Porsche 911 (991) 3.8L Carrera 4 09.2010-12.2011 FRONT
BOXSTER (981) 2.7L 195 04/2012 FRONT
BOXSTER (981) GTS 3.4L 243 02/2014 FRONT
BOXSTER (981) S 3.4L 232 04/2012 FRONT
BOXSTER Spyder (981) 3.8L 276 07/2015 FRONT
CAYMAN (981) 2.7L 202 03/2013 FRONT
CAYMAN (981) GTS 3.4L 250 02/2014 FRONT
CAYMAN (981) S 3.4L 239 03/2013 FRONT
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31486
98135193000
98135193109
98135193809
98135193900
99135193900
99735193109
99735193803
99735193804
99735193806
99735193810
99735193811
99735193819
99735193803
99735193804
99735193805
99735193806
99735193819
98135193904
9973513809
99735193107
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
Price: €172.07 inc. VAT
Stock Due - No Delivery Date
Shop Securely
12 Month Warranty
Worldwide Delivery
07B31536
Product Information
Brake Pad size: Width: 114mm / Thickness: 16mm / Height: 73mm
Information about
Brake Pad Size
This Product Fits:
Porsche Boxster (987) 2.7ltr, 2.9ltr, 3.4ltr
Porsche Boxster (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Boxster (718) 2.0ltr, 2.5ltr Rear
Porsche Boxster Spyder (718) 4.0ltr Rear
Porsche Cayman (987) 2.7ltr, 2.9ltr, 3.4ltr Rear
Porsche Cayman (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Cayman (718) 2.0ltr, 2.5ltr Rear
Porsche GT4 (718) 4.0ltr Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31536
The product you are viewing cross references to these numbers
Product Information
Brake Pad size: Width: 114mm / Thickness: 16mm / Height: 73mm
Information about
Brake Pad Size
This Product Fits:
Porsche Boxster (987) 2.7ltr, 2.9ltr, 3.4ltr
Porsche Boxster (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Boxster (718) 2.0ltr, 2.5ltr Rear
Porsche Boxster Spyder (718) 4.0ltr Rear
Porsche Cayman (987) 2.7ltr, 2.9ltr, 3.4ltr Rear
Porsche Cayman (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Cayman (718) 2.0ltr, 2.5ltr Rear
Porsche GT4 (718) 4.0ltr Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31536
98735293901
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: €140.41 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
TS-917-4
Product Information
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-917-4
The product you are viewing cross references to these numbers
Product Information
Titanium Brake Pad Heat Shields.This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-917-4
23329
07.B314.15
07B31415
99635294903
99735193904
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: €87.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
TS-738-4
Product Information
This Product Fits:
Porsche 986 Boxster 2.5/2.7 97-05 Rear
Porsche 986 Boxster S 3.2 99-05 Rear
Porsche 987 Boxster 2.7 05>> Rear
Porsche 987 Boxster S 3.2 05>> Rear
Porsche 987C Cayman 06>> Rear
Porsche 996 3.4/3.6 97-05 Rear
Porsche 997 C2/C4 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-738-4
The product you are viewing cross references to these numbers
Product Information
Titanium Brake Pad Heat Shields.This Product Fits:
Porsche 986 Boxster 2.5/2.7 97-05 Rear
Porsche 986 Boxster S 3.2 99-05 Rear
Porsche 987 Boxster 2.7 05>> Rear
Porsche 987 Boxster S 3.2 05>> Rear
Porsche 987C Cayman 06>> Rear
Porsche 996 3.4/3.6 97-05 Rear
Porsche 997 C2/C4 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-738-4
21792
07.B315.14
07B31514
99635293903
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: €87.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
TS-1741-4
Product Information
This Product Fits:
Porsche 991 , 992 & GT4
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Product Information
Titanium Brake pad heat shields. Front Porsche 991, 992 , GT4
Price is per axle (four pieces)This Product Fits:
Porsche 991 , 992 & GT4
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Vehicle Group
Vehicle Group
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S 3.0L 2019-24
- Porsche 992.1 Carrera 4S 3.0L 2019-24
- Porsche 992.1 Carrera 2S Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S 3.0L 2020-24
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Price: €138.06 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
TS-1389-4
Product Information
This Product Fits:
Porsche 981, 718 Cayman base, S and GTS (2.5L turbo)
does not fit GT4 or GTS 4.0 cars
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Product Information
Titanium Brake pad heat shields, Front.This Product Fits:
Porsche 981, 718 Cayman base, S and GTS (2.5L turbo)
does not fit GT4 or GTS 4.0 cars
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Vehicle Group
Vehicle Group
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €138.06 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
DISPLAYING 1 to 12 (of 12 products)
Also found on these pages
About Brembo Sport Brake Pads
Unlock sharper braking and track-ready precision with Brembo Sport Brake Pads from Design911. Designed for performance-minded Porsche drivers, these pads deliver enhanced friction, superior temperature stability, and fade-free stopping power, ensuring you stay in control whether on the road or the circuit.
What They Are & What They Do
Brembo Sport pads are high-performance friction components
that provide stronger initial bite and consistent braking response across a
wide temperature range. Engineered with advanced metallic and ceramic
compounds, they ensure shorter stopping distances, improved modulation, and
reduced fade during repeated high-energy braking.
Why They Fail
Over time, brake pads wear naturally due to friction.
Performance pads can deteriorate faster under track conditions or aggressive
driving, leading to glazing, cracking, or uneven wear. Excessive heat or
contamination from dust and moisture can also reduce friction efficiency and
cause squeal or vibration.
Why They Should Be Replaced
Replacing worn Brembo Sport pads is essential to maintain braking
precision, safety, and vehicle balance. Fresh pads restore optimal contact with
the discs, ensuring predictable pedal feel and maximum stopping power.
Upgrading to new Brembo Sport pads also improves heat tolerance and fade
resistance, especially for Porsches driven in demanding environments.
Whether you drive a 911, Cayman, Boxster, Taycan, or Macan, Design911 offers authentic Brembo Sport brake pads engineered for Porsche’s exact specifications - combining motorsport technology with everyday drivability.
Brembo Front Sport Brake Pads
Performance front-axle pads engineered for strong initial
bite and consistent braking power under heavy loads and high speeds.
Brembo Rear Sport Brake Pads
Matched rear-axle pads delivering balanced braking and
stable control during intense deceleration and track use.
Brembo High-Performance Street Pads
Ideal for spirited road driving - combining comfort, low
noise, and enhanced bite with extended durability.
Track & Motorsport Brake Pads
Advanced compounds optimised for extreme temperature stability and maximum friction, perfect for circuit and competition use.
Brembo Sport Brake Pad Kits
Complete kits including pad sets and accessories for easy
installation - designed to upgrade both performance and reliability.
The Brembo SPORT series represents the first step in
high-performance braking upgrades. Designed for sporty road use, these pads
feature a special compound that ensures constant friction, quiet operation,
and minimal wear on both pad and disc. Operating best between 200°C and
300°C and capable of withstanding up to 600°C, they guarantee total
braking control and comfort even under demanding conditions — especially
when paired with Brembo performance discs.
Ideal for enthusiasts and performance drivers, Brembo SPORT pads offer race-inspired braking with everyday comfort and reliability.
You may also like
Popular Models
