Control Arms Front

Front Lower Control Arm Centre Solid Bushing.
Enhance the front suspension precision of your Porsche with this high-performance centre solid bushing for the lower control arm. Specifically designed for the Porsche 996 and Boxster 986 models, this upgrade replaces the original rubber pivot insert with a hardened, high-density unit that dramatically reduces deflection and unwanted movement. With less compliance in the control arm pivot, the suspension geometry remains consistent under cornering, braking and load — giving you sharper steering feel, more accurate turn-in, and better overall handling. Ideal for performance upgrades, spirited road driving, or chassis refreshes, this component helps your Porsche deliver the crisp response and alignment stability it was built for.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04

Fits On To Diagram Ref No 6

What This Product Does:

• By replacing a flexible rubber insert with a solid or high-density material, this bushing significantly reduces unwanted deflection or compliance at the control arm pivot.
• With less pivot movement, suspension geometry (such as camber and toe) is held more consistently under cornering, braking, or load. That means better steering responsiveness and reduced unwanted change in alignment when the car is pushed.
• The result is a sharper, more precise front end feel, better turn-in, improved handling stability, and the ability to extract more from your tyres and suspension setup.
  
  

Symptoms Of Wear Or Need For Upgrade:

• Vague or soft steering feel — the front end may not seem as sharp as it used to be.
• Alignment shifting under load — camber or toe might move when cornering or braking.
• Uneven or accelerated tyre wear (especially inner/outer edges) due to geometry changes.
• Control arm bushings creaking, clunking or showing visible degradation.
• The front end may feel less stable or responsive, especially in a performance/setup car.

Why Replacement Or Upgrade Matters:

• Upgrading to a solid-insert bushing restores a firm, fixed pivot point for the control arm — this means the front suspension works as tightly as possible, which is especially important when you’ve upgraded springs, anti-roll bars, tyres, or you’re driving spiritedly or on track.
  
• It reduces unwanted movement in the front suspension system, which helps maintain factory alignment specs and avoids geometry compromises under load.
  
• The improved rigidity enhances feel, control, and driver confidence — the car will respond more directly to your inputs.
• It also prevents ongoing secondary wear — when a pivot is soft, other components (bushings, tyres, arms) are forced to compensate and may wear faster.
• For restoration builds, daily drivers with upgrades, or performance cars, this is a relatively modest investment that yields real handling improvement.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319

The product you are viewing cross references to these numbers

Front Lower Control Arm Eccentric Centre Solid Bushing.

Upgrade your Porsche’s front suspension precision with the Front Lower Control Arm Eccentric Centre Solid Bushing.
This solid centre bushing replaces the factory rubber insert in the front lower control arm’s eccentric pivot point, creating a direct, rigid connection between the control arm and subframe.
By eliminating unwanted flex and deformation, it ensures stable geometry, sharper steering response, and improved road feel.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche Boxster 986 2.5L 1997-99
  
• Porsche Boxster 986 2.7L 1999-02
  
• Porsche Boxster S 986 3.2L 1999-02
  
• Porsche Boxster 986 2.7L 2003-04 
• Porsche Boxster S 986 3.2L 2003-04
  
• Porsche 996 C2 3.4L 1997-08/01 
• Porsche 996 C4 3.4L 1997-08/01
  
• Porsche 996 C2 3.6L 09/01-2005
  
• Porsche 996 C4 3.6L 09/01-2005
  
• Porsche 996 C4S 3.6L 09/01-2005
  
• Porsche 996 TURBO 2000-05 
• Porsche 996 GT2 2001-05
  
• Porsche 996 GT3 MKII 2003>>
  
• Porsche 996 GT3 MKII 2003>>
  
• Porsche 996 GT3 RS 2003-04
  
  

Fits On To Diagram Ref No 6

What This Product Does:

• Provides a fixed pivot / locational constraint - The “eccentric” or “center” position allows small adjustment for toe / camber alignment, but the solid insert gives a stable, rigid connection between arm and subframe.
  
• Reduces compliance / play - Unlike rubber bushings which deform, a solid bushing minimizes unwanted movement, improving feedback and response in suspension geometry under load.
  
• Improves alignment consistency - By being more rigid, it helps maintain the alignment settings (camber, toe) more consistently under dynamic loads (cornering, braking, acceleration).
  
• Enhances handling precision - Less movement in the pivot point sharpens turn-in and reduces deflection that can dull steering feel.
  
• May transmit more NVH - Because it is solid / rigid, vibrations or impacts may more readily pass through to the chassis compared to soft rubber bushings.
  
  

Symptoms / Signs Of Failure Or Need For Replacement:

• Steering vagueness or slop — control arms deflect, causing soft steering feel
  
• Alignment shifts under cornering / load — toe or camber changes mid-corner
  
• Uneven tire wear — due to inconsistent geometry
  
• Clunking or knocking noises at the front when going over bumps or during direction changes
  
• Degraded response or understeer because front grip is less precise
  
• Excessive deflection under load — the car might feel soft in the front during spirited driving
  
  

Why Replacement Or Upgrade Matters:

• Restores Suspension Tightness - Reduces flex and unwanted movement in a key pivot point, giving sharper steering feedback and more precise handling.
  
• Maintains Alignment Under Load - Better holds camber and toe settings under cornering, braking, and acceleration.
  
• Eliminates Slop and Play - Worn soft bushings allow movement; a better insert stops that, restoring original handling feel.
  
• Improves Driver Confidence - The front end feels more responsive, predictable, and controlled — especially in performance or spirited driving conditions.
  
• Cornering Performance Gain - The solid bushing supports sharper turn-in and reduces geometry change under lateral loads, improving grip and handling balance.
  
• Durability - Well-made solid inserts (especially aluminum / hardened construction) resist aging, deformation, and deterioration more than older rubber.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319

The product you are viewing cross references to these numbers

Front Lower Control Arm, Rear Solid Bushing.
Upgrade the stability and precision of your Porsche’s front suspension with this high-density solid bushing for the lower control arm rear mount. Designed for the Porsche 996 and Boxster 986, this bushing replaces the standard rubber insert with a firmer compound that minimises unwanted movement and preserves suspension geometry under load. Ideal for both street and track use, it keeps your front suspension aligned, reactive, and crisp.
Sold As A Set.
x2 Sets Required Per Car.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04

Fits On To Diagram Ref No 6

What This Product Does:

• The lower control arm rear bushing sits at the pivot or mount of the control arm on the front suspension. Its job is to allow controlled articulation of the arm while also restraining unwanted movement.
• By using a solid or high-density material instead of a standard soft rubber, the bushing significantly reduces unwanted flex or compliance. As a result, the suspension geometry (camber, toe, alignment) remains more stable under load (cornering, acceleration, braking).
  
• Less compliance in this mount means the front suspension reacts more precisely to driver input and chassis motion, improving handling stability, especially in modified or performance-oriented setups.

Symptoms & When To Need It:

• Front end feeling loose or vague in corners; the car may “step out” or have inconsistent behavior under heavy load.
  
• Uneven or accelerated tyre wear on the front due to alignment changing under load.
• The front suspension feels soft or sloppy, especially if the car has been lowered or has stiffer springs/anti-roll bars installed.
• The original rubber bushing shows signs of wear: cracking, splitting, excessive compression, or visible deformation.
• You’re upgrading the suspension and wish to reduce deflection in the pivot area to maximise benefits of other upgrades.

Why Replacement / Upgrade Matters:

• Over time the factory rubber bushings soften, deteriorate, or lose their design stiffness. This can degrade suspension accuracy and handling feel.
• Upgrading to a solid or high-density bushing restores the mount’s rigidity, keeps geometry more consistent, and enhances control — especially useful in performance, track, or modified cars.
• Better control arm mounting means less unwanted movement in the front suspension, which helps maintain alignment and improves driver confidence.
• For anyone restoring their Porsche or refreshing the chassis, upgrading key bushings like this one is a foundational step to ensure the car handles as well as it looks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319

The product you are viewing cross references to these numbers

PFF57-502G Front Track Control Arm Caster Offset Outer Bush uses our usual Purple 80A material combined with an offset bore sleeve to allow up to 0.4° of Caster increase from OE, allowing for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain.

Sold as a pair (both arms)



OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Fits:
Fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802G.

Diagram ref no 2

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502G

The product you are viewing cross references to these numbers

Powerflex Black Series Front Track control arm caster offset outer bush uses our usual 95A shore material combined with an offset bore sleeve to allow up to 0.4° of Caster increase from OE, allowing for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain.

Sold as a pair (both arms)

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Fits:
Fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802G.

Diagram ref no 2

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502GBLK

The product you are viewing cross references to these numbers

GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.



Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)

Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.

These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180039

The product you are viewing cross references to these numbers

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180009

The product you are viewing cross references to these numbers

PowerFlex Lower Arm Bush Repair Kit.  (Metal arm not included) 

Replacement bush kit for Porsche lower arms in polyurethane.

This kit fits ONE lower arm front or rear.
Includes 1 x Centre Bush & 1 x Rear Arm Bush.
Please note these parts should be fitted by an engineer.

Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for ONE lower arm which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for ONE lower arm which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502

The product you are viewing cross references to these numbers

PowerFlex Lower arm centre bush.



Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

SET OF 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.

Diagram ref :
no. 2 - front / no. 5 - rear

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502

The product you are viewing cross references to these numbers

Powerflex Black Series PFF57-502BLK
Replacement motorsport lower arm centre polyurethane bushes.



Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

SET OF 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.

Diagram ref: 
no. 2 - front  /  no. 5 - rear

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502BLK

The product you are viewing cross references to these numbers

PowerFlex Lower Arm Rear Bush

Replacement motorsport lower arm rear polyurethane bushes.

Set of 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.

Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-503

The product you are viewing cross references to these numbers

Lower control arm bushes (Centre)
SET OF 4 Bushes for Two Control Arms.
Fits OEM or upgraded GT2/GT3 control arms.



Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3/GT2

*Porsche Boxster 986 Front Only

Replacement lower control arm bushings to improve the handling characteristics of the Porsche 996 These non-adjustable lower control arm bushings eliminate the unwanted caster changes while the car is under acceleration and braking. The Rohler lower control arm bushings are made from 6061 T6 aluminum to help stiffen the Porsche suspension without adding road harshness to the interior of the car. These bushings are a great improvement for anyone who frequents the track in their 996 cars.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602409964

The product you are viewing cross references to these numbers

Lower wishbone central bushing removal and installation tool.

1 x tool required



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Simplify the installation process of Monoball products and replacement bushings.

Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.

Front and rear control arms on the 996, 997, 986, 987, & 981
Front Lower Control Arm only on 991

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260019

The product you are viewing cross references to these numbers

Lower control arm centre solid bushing. 
Price is EACH



Fits:
Porsche 986 Boxster
Porsche 996 1997-05

High Density Thrust Arm Bushing Kit for the 996 and 986 Boxster is a great way to further perfect your suspension setup. These bushings offer the benefits of a harder durometer without the noise and ride harshness associated with solid aluminium bushings. A great option for dual use street/track vehicles that want another measure of adjust ability and stability without sacrificing ride quality.
25% increase in durometer

Material:
6082-T6 Aluminum
When using in 997/987 requires spacers/shims

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319

The product you are viewing cross references to these numbers

Lower control arm eccentric centre solid bushing. 
Price is EACH



Reduces caster changes under load
Allows easier, faster and more precise suspension adjustment 'Bolt in' solution; fits factory control arm and requires no further modifications

Fits:
Porsche 986 Boxster
Porsche 996 1997-05

High Density Thrust Arm Bushing Kit for the 996 and 986 Boxster is a great way to further perfect your suspension setup. These bushings offer the benefits of a harder durometer without the noise and ride harshness associated with solid aluminium bushings. A great option for dual use street/track vehicles that want another measure of adjust ability and stability without sacrificing ride quality.
25% increase in durometer

Material:
6082-T6 Aluminum
When using in 997/987 requires spacers/shims

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319

The product you are viewing cross references to these numbers

Lower control arm eccentric monoballs.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.

Increasing Camber

Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber

Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.



Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.

Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260006

The product you are viewing cross references to these numbers