Turbo Chargers / Intercoolers & Parts

Turbocharger.



Fits:
Porsche 997.2 Turbo (Engine 9A1) 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 9 (Left, cyl. 1-3) and 10 (Right, cyl. 4-6)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A112301

The product you are viewing cross references to these numbers

Auxiliary water pump for turbocharger.



Fits:
Porsche 718 Boxster 2017>>
Porsche 718 Cayman 2017>>
Porsche 997.2 Turbo 2010-13
Porsche 991.2 Carrera 2017-19
Porsche 991 Turbo 3.8L 2013-20

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A262025100

The product you are viewing cross references to these numbers

Complete performance charge air high flow cooling kit with inlet pipes.
Full Big Pack including Inlet Hoses.



To fit:
Porsche 911 (997.2 Turbo) 2010 to 2012

This complete package includes Do88's motorsport grade intercooler package with carbon fibre air guides, high flow Y-pipe with all hoses and accessories for installation and the optional high flow inlet hoses.

The intercooler and y-pipe are great products individually but as a team they give great reduction of inlet air temperatures and at the same time they reduce the back pressure of the whole system; this means increased power!

Significant advantages with Do88's Porsche Performance Charge Air High Flow Kit:

• Cooler air to your engine! 38°C (52°C), do88 14°C lower than OEM parts!
• High quality high density UK made motorsport cores
• 3D freeform designed cast end tanks
• Custom designed carbon fibre ambient air guides
• Assembly air flow at 0,175bar/2,54psi pressure drop: 646CFM (564CFM), do88 15% higher!
• Post intercooler air temperature at same conditions: 38°C (52°C), do88 14°C lower!
• Y-pipe made of 70mm mandrel bent aluminium pipes
• Y-pipe smooth flow cast collector part
• Comes with high quality silicone hoses and accessories for installation
• See enlarged images for more information!

About the Intercoolers:

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

About the Y-Pipe:

Do88: At the beginning of the development process of this product we spent a lot of time thinking what would be the preferred way to build a Y-pipe and here is the result of our conclusions and development process! Our pipe has both a very good flow rate and a low weight which is achieved by combining mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then welded CNC-machined connections for bov and breather hoses.

This construction adds a lot of performance but only small amount of extra weight. Do88 Performance Y-pipe weight 1,52 kg (3,35 lb) OEM plastic pipe weight 1,38 kg (3,04 lb) and competitor cast performance pipe weight 2,76kg (6,08 lb)!

The pipes are then finished in a high quality powder coat that makes them look as good as they perform! You can choose between the more discrete semi gloss black and a fresh silver metallic finish.

About the Inlet Pipes:

Do88: It was a real challenge developing new turbo intake hoses for the 997.2 Turbo. The lack of space makes it really difficult to make a set of hoses that outflow the stock OEM plastic pipes. We achieved this and succeeded in maximising the performance but we had to make the small compromise of letting the hoses have no clearance; so they will push or rub in some non-sensitive areas. The hoses are reinforced with stainless steel wire to ensure overall durability and lasting performance.

Our self-developed intake hoses increase air flow; 26% higher than the OEM hoses. We can ensure you the sensation while driving is very different. The improvement in throttle response is immense, making the car feel so much more refined and alert. This upgrade makes it become what it should have been from the start. This is an improvement no test figures can explain, it has to be perceived behind the wheel of a 997 turbo!

Overall Performance:

Do88: When it comes to performance our big pack gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers and Y-pipe! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Please select your preferred Y-Pipe Colour from the options

High performance Intercooler kit. Porsche 997.2 Turbo / 997.2 Turbo S



The Performance Intercooler Upgrade Kit for:
Porsche 997 turbo 3.8ltr - 2009 to 2012 (368KW / 500PS)
Porsche 997 turbo S 3.8ltr - 2009 to 2012 (390KW / 530PS)

Kit comes with:
2 x Charge air intercoolers
4 x Carbon air ducts
4 x Silicone hoses
4 x Hose clamps
1 x Mounting kit

Unleash the full potential of your Porsche 997 Turbo with our EVO2 high-performance intercooler kit.

Here’s what makes this kit a game-changer:

Our EVO2 intercoolers (2x [330mm x 222mm x 145mm] = 21,244cc) deliver an incredible 77% increase in charge air volume compared to the factory-installed intercoolers. This boost translates to a significant uptick in your vehicle's performance. The Competition high-performance intercooler core is engineered for superior cooling, ensuring your engine maintains optimal temperatures even under extreme conditions. Despite its high performance, our intercooler kit is surprisingly lightweight, with each cooler weighing just 6.7 kg, helping to reduce overall weight while maximizing power.

Precision CAD-designed cast aluminum freeform end boxes provide exceptional internal airflow and can withstand high pressures of up to 6 bar (tested). The kit also includes a custom-fit carbon air duct that ensures the intercooler receives ample fresh air, which is essential for peak performance. Additionally, our kit features silicone hoses with an enlarged cross-section to further enhance airflow.

Our intercoolers come with an anti-corrosion coating that guarantees durability and excellent heat conduction. The kit includes everything you need for installation, including new carbon air guides, silicone hoses, and aluminum adapters. It’s designed for a straightforward replacement of the factory intercoolers and features a 70mm intake and exhaust for ultimate performance.

Maximize your Porsche 997 Turbo’s potential with the EVO2 high-performance intercooler kit.

Advantages of the Wagner Tuning intercooler:

• Improved cooling performance
• 77% more charge air volume
• Extended to 70 mm inlet and outlet
• Precisely fitting carbon air duct
• Simple replacement

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

200001080

The product you are viewing cross references to these numbers

Intercooler Pressure Hose.
Turbocharger 1-3 Cyl. LEFT.



Fits:
Porsche 997 Turbo / Turbo GT2 3.6L 2007-09
Porsche 997 Turbo 3.8L / Turbo S 3.8L 2010>>
Porsche 997 GT2RS 3.6L 2011

This product supersedes Porsche's old part numbers:
- 99711063101

Click picture for large parts diagram.
Diagram Ref No 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711063102

The product you are viewing cross references to these numbers

Oil collection container for turbocharger



Fits:
Porsche 997.2 Turbo 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 21 (Cyl 1-3) or 22 (Cyl 4-6)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A110733

The product you are viewing cross references to these numbers

O-ring seal - 50 x 2.5 - between the intake pipe and the turbocharger. 

Sold individually; x2 required per vehicle.

Fits:
Porsche 997 Turbo / GT2 / GT2 RS 2007-13
Porsche 991 Turbo / S 2014-20 - Excludes GT2 RS

Diagram ref. 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970756441

The product you are viewing cross references to these numbers

O-ring - 58.05 x 3.55 - for intercooler hose (sold individually).

Fits:
Porsche 95B-1 Macan S Petrol 2014-18 (x2 Required)
Porsche 95B-1 Macan GTS 2014-18 (x2 Required)
Porsche 95B-1 Macan Turbo 2014-18 (x2 Required)

Porsche 955 Cayenne Turbo 2003-06 (x2 Required)

Porsche 958-1 Cayenne S Diesel V8 2013-14 (x2 Required)

Porsche 958-2 Cayenne S Diesel V8 2015-18 (x2 Required)
Porsche 958-2 Cayenne S V6 2015-18 (x2 Required)
Porsche 958-2 Cayenne GTS V6 2015-18 (x2 Required)

Porsche 996 Turbo / GT2 2001-05 (x6 Required)

Porsche 997 Turbo / GT2 2007-13 (x4 Required)

Diagram ref. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95511072100

The product you are viewing cross references to these numbers

O-ring - 58.05 x 3.55 - for intercooler hose (sold individually).

Fits:
Porsche 95B-1 Macan S Petrol 2014-18 (x2 Required)
Porsche 95B-1 Macan GTS 2014-18 (x2 Required)
Porsche 95B-1 Macan Turbo 2014-18 (x2 Required)

Porsche 955 Cayenne Turbo 2003-06 (x2 Required)

Porsche 958-1 Cayenne S Diesel V8 2013-14 (x2 Required)

Porsche 958-2 Cayenne S Diesel V8 2015-18 (x2 Required)
Porsche 958-2 Cayenne S V6 2015-18 (x2 Required)
Porsche 958-2 Cayenne GTS V6 2015-18 (x2 Required)

Porsche 996 Turbo / GT2 2001-05 (x6 Required)

Porsche 997 Turbo / GT2 2007-13 (x4 Required)

Diagram ref. 20.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95511072100

The product you are viewing cross references to these numbers

O-ring for turbocharger coolant line, 12 x 2,5
Sold each.



Fits:
Porsche 997.2 Turbo 2010-13
Porsche 991 Turbo 2014-21

Click 'Zoom in' for large parts diagram.
Diagram ref no 7


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970759740

The product you are viewing cross references to these numbers

O-ring for turbocharger oil supply line. 

Sold individually; x4 required per vehicle.

Fits:
Porsche 95B-1 Macan S / GTS / Turbo 2014-18 - Excludes diesel and 2.0 base model

Porsche 997.2 Turbo 2010-13 - Excludes GT2 RS

Porsche 991 Turbo / GT2 RS 2014-20

Porsche 958.2 Cayenne S / GTS 3.6L V6 2015-18

Porsche 970.2 Panamera S / 4S 3.0L V6 2014-18

Diagram ref. 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970761341

The product you are viewing cross references to these numbers

Performance charge air high flow cooling kit..
Big Pack without optional Inlet Hoses.



To fit:
Porsche 911 (997.2 Turbo) 2010 to 2012

This comprehensive package includes Do88's motorsport grade intercooler package with carbon fibre air guides and high flow Y-pipe with all hoses and accessories for installation.

The intercooler and y-pipe are great products individually but as a team they give great reduction of inlet air temperatures and at the same time they reduce the back pressure of the whole system; this means increased power!

Significant advantages with Do88's Porsche Performance Charge Air High Flow Kit:

• Cooler air to your engine! 38°C (52°C), do88 14°C lower than OEM parts!
• High quality high density UK made motorsport cores
• 3D freeform designed cast end tanks
• Custom designed carbon fibre ambient air guides
• Assembly air flow at 0,175bar/2,54psi pressure drop: 646CFM (564CFM), do88 15% higher!
• Post intercooler air temperature at same conditions: 38°C (52°C), do88 14°C lower!
• Y-pipe made of 70mm mandrel bent aluminium pipes
• Y-pipe smooth flow cast collector part
• Comes with high quality silicone hoses and accessories for installation
• See enlarged images for more information!

About the intercoolers:

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

empty
Performance Charge Air High Flow Cooling Kit

To Fit: Porsche 911 (997.2 Turbo) 2010 to 2012

This comprehensive package includes Do88's motorsport grade intercooler package with carbon fibre air guides and high flow Y-pipe with all hoses and accessories for installation.

The intercooler and y-pipe are great products individually but as a team they give great reduction of inlet air temperatures and at the same time they reduce the back pressure of the whole system; this means increased power!

Significant advantages with Do88's Porsche Performance Charge Air High Flow Kit:

Cooler air to your engine! 38°C (52°C), do88 14°C lower than OEM parts!
High quality high density UK made motorsport cores
3D freeform designed cast end tanks
Custom designed carbon fibre ambient air guides
Assembly air flow at 0,175bar/2,54psi pressure drop: 646CFM (564CFM), do88 15% higher!
Post intercooler air temperature at same conditions: 38°C (52°C), do88 14°C lower!
Y-pipe made of 70mm mandrel bent aluminium pipes
Y-pipe smooth flow cast collector part
Comes with high quality silicone hoses and accessories for installation
See enlarged images for more information!
About the intercoolers:

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

About the Y-Pipe:

Do88: At the beginning of the development process of this product we spent a lot of time thinking what would be the preferred way to build a Y-pipe and here is the result of our conclusions and development process! Our pipe has both a very good flow rate and a low weight which is achieved by combining mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then welded CNC-machined connections for bov and breather hoses.

This construction adds a lot of performance but only small amount of extra weight. Do88 Performance Y-pipe weight 1,52 kg (3,35 lb) OEM plastic pipe weight 1,38 kg (3,04 lb) and competitor cast performance pipe weight 2,76kg (6,08 lb)!

The pipes are then finished in a high quality powder coat that makes them look as good as they perform! You can choose between the more discrete semi gloss black and a fresh silver metallic finish.

Overall Performance:

When it comes to performance our big pack gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers and Y-pipe! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Performance intercooler upgrade kit.



To Fit:
Porsche 911 997.1 Turbo 2007-2009 and GT2RS models
Porsche 911 997.2 GT2 RS model 2010 to 2012
Porsche 911 997.2 Turbo 2010 to 2012

A true performance upgrade intercooler kit for the 997.1 Turbo and GT2. This well thought out refined kit allows fitment of the larger later type 997.2 intercoolers onto the 997.1 model, and includes all the components and hardware necessary for a serious upgrade!

Significant advantages with Do88's Porsche Performance Intercooler Kit:

• Cooler air to your engine!
• High quality, high density UK made motorsport cores.
• 3D freeform designed cast end tanks.
• Custom designed carbon fibre ambient air guides.
• Comes with high quality silicone hoses and accessories for installation.
• See enlarged images for more information!

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimise this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

Included in this kit:

• Performance intercoolers
• Carbon fibre air guides
• Silicone hoses
• Hose clamps
• Rubber seals
• Installation hardware

When it comes to performance our intercooler kit gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Please select which Y-Pipe you intend to install this intercooler kit with from the options.

Radiator intercooler. LEFT.



Fits:
Porsche 997 Turbo 3.8L / Turbo S 3.8L 2010>>
Porsche 997 GT2RS 3.6L 2011

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711063971

The product you are viewing cross references to these numbers

Radiator intercooler. LEFT.



Fits:
Porsche 997 Turbo 3.8L / Turbo S 3.8L 2010>>
Porsche 997 GT2RS 3.6L 2011

Click ' Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711063971

The product you are viewing cross references to these numbers

Radiator intercooler. RIGHT.



Fits:
Porsche 997 Turbo 3.8L / Turbo S 3.8L 2010>>
Porsche 997 GT2RS 3.6L 2011

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711064071

The product you are viewing cross references to these numbers