Brembo Sport Brake Pads
Reliability and high quality
Brembo Racing | SPORT | EVO 500++ brake fluid is ideal in all conditions, fit for all, from everyday driving to non-professional intermediate use on the track.
This is a reliable high quality fluid that improves pedal feel and consistent braking performance without the frequent inspection intervals of a full racing brake fluid.
Formulated for real enthusiasts
- Suitable for use in braking systems designed for non-mineral fluids.
- Purposely designed to meet the expectations of enthusiasts who demand a lot from their system.
- Exceeds the requirements of specification U.S. FMVSS No.116 DOT 3 and DOT 4, SAE J1703, SAE J1704 and ISO 4925 (classes 3 and 4).
- Compatible with other DOT 3, DOT 4 and DOT 5.1 brake fluids, as long as they comply with the above specification.
For safety reasons, it is recommended to replace your brake fluid at least once a year. Not Suitable for vehicles with mineral oil systems. Colour range: appearance from transparent to amber. In the case of new brake fluid, when poured out from the sealed bottle, the colour may differ from the range, but the performance remains the same.
Shop Securely
12 Month Warranty
Worldwide Delivery
This high temperature brake fluid designed for the most extreme racing conditions.
It has a dry boiling point of 335° C which is around 25° C higher than a typical racing brake fluid. Developed exclusively for competition use, Brembo HTC 64T provides the highest performance under all racing conditions and has been used in F1, ALMS, DTM, WRC and BTCC.
Very high dry boiling point (335°C) / Wet boiling point 203°C
Ideal for competition vehicles which experience high brake temperatures
Successfully used in top level Motorsport including F1
For maximum performance it is recommended that Brembo HTC 64T is not mixed with other brake fluids.
500ml Bottle
Please Note
Must not be used in brake systems containing magnesium parts
Shop Securely
12 Month Warranty
Worldwide Delivery
Brake pads, Front. Porsche 996 GT2/GT3 / 997GT3 / 997 TURBO
Brake pad size: Width : 190mm / Thickness: 17mm / Height: 86mm
Information about Brake Pad Size
This Product Fits:
Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front
Porsche Carrera GT 03>> Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31417
The product you are viewing cross references to these numbers
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Turbo 2010-13
- Porsche Carrera GT
Shop Securely
12 Month Warranty
Worldwide Delivery
Brake Pad size: Width: 128mm / Thickness: 17mm / Height: 76mm
Information about Brake Pad Size
This Product Fits:
Porsche 997 Turbo 2006>> Rear
Porsche 997 GT3 2006>> Rear
Porsche 997 GT3 RS 2006>> Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31515
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche 997 Turbo Gen.2
Technical specifications:
Width: 132mm
Thickness: 18mm
Height: 67mm
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
07B31430
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 997 Turbo 06>> Rear
Porsche 997 GT3 06>> Rear
Porsche 997 GT3 RS 06>> Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-1300-4
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Shop Securely
12 Month Warranty
Worldwide Delivery
This Product Fits:
Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front
Porsche Carrera GT 03>> Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-991-4
The product you are viewing cross references to these numbers
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Carrera GT
Shop Securely
12 Month Warranty
Worldwide Delivery
Unlock sharper braking and track-ready precision with Brembo Sport Brake Pads from Design911. Designed for performance-minded Porsche drivers, these pads deliver enhanced friction, superior temperature stability, and fade-free stopping power, ensuring you stay in control whether on the road or the circuit.
What They Are & What They Do
Brembo Sport pads are high-performance friction components
that provide stronger initial bite and consistent braking response across a
wide temperature range. Engineered with advanced metallic and ceramic
compounds, they ensure shorter stopping distances, improved modulation, and
reduced fade during repeated high-energy braking.
Why They Fail
Over time, brake pads wear naturally due to friction.
Performance pads can deteriorate faster under track conditions or aggressive
driving, leading to glazing, cracking, or uneven wear. Excessive heat or
contamination from dust and moisture can also reduce friction efficiency and
cause squeal or vibration.
Why They Should Be Replaced
Replacing worn Brembo Sport pads is essential to maintain braking
precision, safety, and vehicle balance. Fresh pads restore optimal contact with
the discs, ensuring predictable pedal feel and maximum stopping power.
Upgrading to new Brembo Sport pads also improves heat tolerance and fade
resistance, especially for Porsches driven in demanding environments.
Whether you drive a 911, Cayman, Boxster, Taycan, or Macan, Design911 offers authentic Brembo Sport brake pads engineered for Porsche’s exact specifications - combining motorsport technology with everyday drivability.
Brembo Front Sport Brake Pads
Performance front-axle pads engineered for strong initial
bite and consistent braking power under heavy loads and high speeds.
Brembo Rear Sport Brake Pads
Matched rear-axle pads delivering balanced braking and
stable control during intense deceleration and track use.
Brembo High-Performance Street Pads
Ideal for spirited road driving - combining comfort, low
noise, and enhanced bite with extended durability.
Track & Motorsport Brake Pads
Advanced compounds optimised for extreme temperature stability and maximum friction, perfect for circuit and competition use.
Brembo Sport Brake Pad Kits
Complete kits including pad sets and accessories for easy
installation - designed to upgrade both performance and reliability.
The Brembo SPORT series represents the first step in
high-performance braking upgrades. Designed for sporty road use, these pads
feature a special compound that ensures constant friction, quiet operation,
and minimal wear on both pad and disc. Operating best between 200°C and
300°C and capable of withstanding up to 600°C, they guarantee total
braking control and comfort even under demanding conditions — especially
when paired with Brembo performance discs.
Ideal for enthusiasts and performance drivers, Brembo SPORT pads offer race-inspired braking with everyday comfort and reliability.
