Brake Pads Standard

Zimmermann Standard Brake Pad Set- Precision, Comfort & Safety – All in One Set
The Zimmermann Standard Brake Pad Set is part of Zimmermann’s renowned Standard Line, designed for vehicles requiring a reliable, high-performance replacement friction set that meets original performance standards.

Sold as set for one complete axle.
Thickness/Strength: 17mm
Width: 190mm
Height: 102mm
Prepared for wear indicator

• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 2007-09
• Porsche 997 MKII Turbo 2010-13

Zimmermann’s brake pad range is produced with quality engineering, ensuring optimal braking comfort, minimal wear, and dependable stopping power. Every set undergoes a development process lasting up to 3 years and thousands of test miles, guaranteeing outstanding performance and reliability across diverse driving conditions.

What They Do
The Zimmermann brake pads are designed to convert kinetic energy into thermal energy during braking, delivering controlled deceleration with minimal noise and consistent pedal feedback.

Key features and benefits:

• Tailored friction compounds: Formulated using up to 25 different raw materials for optimal grip, balance, and fade resistance.
• Vehicle-specific design: Each pad set is tuned to match the braking characteristics of its intended vehicle type.
• High comfort & low noise: Chamfered edges, anti-vibration layers, and precision backing plates ensure quiet operation.
• Long service life: Durable friction surfaces and quality binding ensure minimal wear, even under demanding conditions.
• Corrosion-resistant components: Protective coatings safeguard against rust, ensuring long-term performance.
• ECE R90 conformity: Certified to meet European safety and braking standards.

Zimmermann’s standard pads are trusted by professionals and enthusiasts alike for smooth, predictable braking and a refined driving experience.

Why Brake Pads Fail

• Even the best pads will wear over time. Common causes of brake pad failure include:
• Friction material wear: Continuous heat and pressure gradually thin the pad surface, reducing braking power.
• Glazing or overheating: Prolonged heavy braking can harden the pad surface, decreasing friction efficiency.
• Uneven contact or alignment issues: Warped rotors or improper installation can cause uneven wear and vibration.
• Contamination: Dust, oil, or road debris can penetrate the braking surface, reducing grip and causing squeal.
• Neglected maintenance: Worn pads increase rotor wear, leading to higher repair costs and potential safety risks.

Regular inspection and timely replacement ensure consistent braking performance and protect your vehicle’s entire braking system.

Why They Should Be Replaced

• Replacing worn or underperforming brake pads with the Zimmermann set ensures your vehicle maintains:
• Reliable braking performance: Fresh pads restore maximum friction, improving stopping distance and response time.
• Driving comfort & quiet operation: Maintains Zimmermann’s hallmark of smooth, low-noise braking.
• Protection for brake discs: Prevents premature rotor wear and costly component damage.
• Consistent safety: Guarantees even pressure distribution and stable pedal feel in all conditions.
• Efficiency & lifespan: New pads maintain proper heat dissipation and energy transfer, extending both pad and disc life.

Zimmermann’s precision-engineered standard brake pads ensure reliability, safety, and long-lasting value for everyday and performance-oriented drivers alike.

Your Advantages at a Glance

• Over 1,000 different Zimmermann pad variants available
• Stored capacity exceeding 120,000 sets for fast availability
• Long lifespan with low dust generation
• Very smooth performance and consistent pedal feel
• Excellent corrosion protection
• Conforms to ECE R90 standards
• Precision production for OE-quality fitment
• Quality controlled at every stage of manufacture       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99635194802ZIM

The product you are viewing cross references to these numbers

Brake pads, Front. Porsche 996 GT2/GT3 / 997GT3 / 997 TURBO
Brake pad size: Width : 190mm / Thickness: 17mm / Height: 102mm

CARS WITH M449 STEEL DISC

• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 2007-09
• Porsche 997 MKII Turbo 2010-13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99635194802ABS

The product you are viewing cross references to these numbers

Brake pads, Front. 
Brake pad size: Width : 190mm / Thickness: 17mm / Height: 102mm

CARS WITH M449 STEEL DISC

• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2004>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 2007-09
• Porsche 997 MKII Turbo 2010-13

  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99635194802BRE

The product you are viewing cross references to these numbers

Brake pads, Front. 
Brake pad size: Width : 190mm / Thickness: 17mm / Height: 102mm

CARS WITH M449 STEEL DISC

• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2004>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 2007-09
• Porsche 997 MKII Turbo 2010-13

Find out about Textar product verification here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99635194802TEX

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle.




Porsche 911 (997) Turbo FRONT
*For cars with Ceramic (PCCB) Disc

Porsche 911 (997) GT3 FRONT
*For cars with Ceramic (PCCB) Disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735194804

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 911 (997) MKI & MKII Turbo REAR
*For cars with Ceramic Disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294703

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 911 (997) Turbo FRONT
*For cars with Steel Disc

Porsche 911 (997) GT3 FRONT
*For cars with Steel Disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735194702

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 911 (997) Turbo FRONT
*For cars with Steel Disc

Porsche 911 (997) GT3 FRONT
*For cars with Steel Disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735194702TRW

The product you are viewing cross references to these numbers

Zimmermann Standard Brake Pad Set- Precision, Comfort & Safety – All in One Set
The Zimmermann Standard Brake Pad Set is part of Zimmermann’s renowned Standard Line, designed for vehicles requiring a reliable, high-performance replacement friction set that meets original performance standards.

Sold as set for one complete axle.
Thickness/Strength: 17mm
Width: 130mm
Height: 76mm
Prepared for wear indicator

• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MKII Turbo 2010-13

Zimmermann’s brake pad range is produced with quality engineering, ensuring optimal braking comfort, minimal wear, and dependable stopping power. Every set undergoes a development process lasting up to 3 years and thousands of test miles, guaranteeing outstanding performance and reliability across diverse driving conditions.

What They Do
The Zimmermann brake pads are designed to convert kinetic energy into thermal energy during braking, delivering controlled deceleration with minimal noise and consistent pedal feedback.

Key features and benefits:

• Tailored friction compounds: Formulated using up to 25 different raw materials for optimal grip, balance, and fade resistance.
• Vehicle-specific design: Each pad set is tuned to match the braking characteristics of its intended vehicle type.
• High comfort & low noise: Chamfered edges, anti-vibration layers, and precision backing plates ensure quiet operation.
• Long service life: Durable friction surfaces and quality binding ensure minimal wear, even under demanding conditions.
• Corrosion-resistant components: Protective coatings safeguard against rust, ensuring long-term performance.
• ECE R90 conformity: Certified to meet European safety and braking standards.

Zimmermann’s standard pads are trusted by professionals and enthusiasts alike for smooth, predictable braking and a refined driving experience.

Why Brake Pads Fail

Even the best pads will wear over time. Common causes of brake pad failure include:

• Friction material wear: Continuous heat and pressure gradually thin the pad surface, reducing braking power.
• Glazing or overheating: Prolonged heavy braking can harden the pad surface, decreasing friction efficiency.
• Uneven contact or alignment issues: Warped rotors or improper installation can cause uneven wear and vibration.
• Contamination: Dust, oil, or road debris can penetrate the braking surface, reducing grip and causing squeal.
• Neglected maintenance: Worn pads increase rotor wear, leading to higher repair costs and potential safety risks.

Regular inspection and timely replacement ensure consistent braking performance and protect your vehicle’s entire braking system.

Why They Should Be Replaced

Replacing worn or underperforming brake pads with the Zimmermann set ensures your vehicle maintains:

• Reliable braking performance: Fresh pads restore maximum friction, improving stopping distance and response time.
• Driving comfort & quiet operation: Maintains Zimmermann’s hallmark of smooth, low-noise braking.
• Protection for brake discs: Prevents premature rotor wear and costly component damage.
• Consistent safety: Guarantees even pressure distribution and stable pedal feel in all conditions.
• Efficiency & lifespan: New pads maintain proper heat dissipation and energy transfer, extending both pad and disc life.

Zimmermann’s precision-engineered standard brake pads ensure reliability, safety, and long-lasting value for everyday and performance-oriented drivers alike.

Your Advantages at a Glance

• Over 1,000 different Zimmermann pad variants available
• Stored capacity exceeding 120,000 sets for fast availability
• Long lifespan with low dust generation
• Very smooth performance and consistent pedal feel
• Excellent corrosion protection
• Conforms to ECE R90 standards
• Precision production for OE-quality fitment
• Quality controlled at every stage of manufacture       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294905ZIM

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle


Porsche 911 (997) Turbo MKI 2007-08 REAR
Porsche 911 (997) Turbo MKII 2010-13 REAR

Thickness: 17 mm
Width: 131 mm
Height: 76 mm

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294905BRE

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 997 3.6L C2 MKII 2009>> REAR
Porsche 997 3.6L C4 MKII 2009>> REAR


Porsche 997.1 Turbo REAR
Porsche 997.2 Turbo REAR
*for cars with Steel disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294904

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 997 3.6L C2 MKII 2009>> REAR
Porsche 997 3.6L C4 MKII 2009>> REAR

Porsche 997.1 Turbo REAR
Porsche 997.2 Turbo REAR
*for cars with Steel disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294904ABS

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle




Porsche 997 3.6L C2 MKII 2009>> REAR
Porsche 997 3.6L C4 MKII 2009>> REAR

Porsche 997.1 Turbo REAR
Porsche 997.2 Turbo REAR
*for cars with Steel disc

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294904BRE

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle.




Porsche 997 3.6L C2 MKII 2009>> REAR
Porsche 997 3.6L C4 MKII 2009>> REAR

Porsche 997.1 Turbo REAR
Porsche 997.2 Turbo REAR
*for cars with Steel disc

Sold as set of 4 pads for one axle.

Find out about Textar product verification here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735294904TEX

The product you are viewing cross references to these numbers

Carbon Ceramic Rear Brake Pads – Fast Road / Track

Only compatible with 9m carbon ceramic brake discs -  9M997GTR

The Carbon Ceramic Rear Brake Pads – Fast Road / Track are a high-performance braking solution designed specifically for Porsche 997 Turbo, GT2, GT3 and GT3 RS models fitted with 9m carbon ceramic brake discs. Engineered for demanding road use and track days, these pads deliver consistent friction, excellent modulation, and predictable release characteristics under extreme braking conditions.

Fits:

• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII GT3 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13

Available from Design911, these rear brake pads are developed to complement carbon ceramic braking systems, providing controlled, confidence-inspiring performance where standard pads fall short.

What Do Carbon Ceramic Rear Brake Pads Do?

These pads are designed to maximise braking performance on carbon ceramic discs.

Core Functions:

• Provide stable and consistent braking on carbon ceramic discs.
• Deliver smooth modulation and predictable pedal feel.
• Maintain reliable friction levels under high temperatures.
• Support balanced rear braking during aggressive driving.
• Enhance braking control on fast road and track environments.

Their compound characteristics ensure confidence during both everyday spirited driving and trackday use.

When Should Carbon Ceramic Rear Brake Pads Be Replaced?

Even advanced brake pads are wear components and require regular inspection.

Replacement Is Recommended When:

• Pad material reaches the minimum safe thickness.
• Braking response becomes inconsistent or reduced.
• Increased stopping distances are noticed.
• Pads have been exposed to repeated high-temperature track use.
• During routine service of carbon ceramic braking systems.

Timely replacement protects the carbon ceramic discs and maintains braking performance.

Why Upgrade to 9m Carbon Ceramic Fast Road / Track Pads?

Standard brake pads are not designed to cope with carbon ceramic disc requirements.

Upgrade Advantages:

• Developed exclusively for 9m carbon ceramic brake discs.
• Low-metallic, resin-bonded compound with steel and aramid fibres.
• Excellent modulation and smooth release characteristics.
• Consistent low-to-medium friction level for predictable braking.
• Improved control and durability compared to OEM-style pads.
• Ideal for fast road driving and trackday use.

This upgrade ensures compatibility, performance, and protection of high-value carbon ceramic discs.

Compound & Fitment Highlights

• 9m fast road / trackday compound
• Low metallic, resin-bonded formulation
• Reinforced with steel and aramid fibres
• Consistent friction across temperature range
• Excellent modulation and release characteristics
• Rear axle fitment only

Key Benefits

• Optimised for carbon ceramic braking systems
• Predictable, fade-resistant braking performance
• Smooth pedal feel and controlled rear braking
• Ideal for fast road and trackday environments
• Protects high-value carbon ceramic discs

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M99735294790

The product you are viewing cross references to these numbers

Carbon Ceramic Rear Brake Pads – OEM Standard PCCB Replacement

Only compatible with 9m carbon ceramic brake discs -  9M997GTR

The Carbon Ceramic REAR Brake Pads – OEM Replacement are designed as a direct, high-quality replacement for the standard spec rear brake pads fitted to Porsche 997 Turbo, GT2, GT3 and GT3 RS models equipped with the 9m carbon ceramic brake discs -  9M997GTR. Engineered to maintain factory braking characteristics while improving consistency and control, these pads deliver smooth modulation, predictable response, and reliable performance for fast road use.

Fits:

• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII GT3 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13

Available from Design911, these rear brake pads are developed to complement carbon ceramic braking systems, providing controlled, confidence-inspiring performance where standard pads fall short.

What Do Carbon Ceramic Rear Brake Pads Do?

These pads are designed to maximise braking performance on carbon ceramic discs.

Core Functions:

• Provide stable and consistent braking on carbon ceramic discs.
• Deliver smooth modulation and predictable pedal feel.
• Maintain reliable friction levels under high temperatures.
• Support balanced rear braking during aggressive driving.
• Enhance braking control on fast road and track environments.

Their compound characteristics ensure confidence during both everyday spirited driving and trackday use.

When Should Carbon Ceramic Rear Brake Pads Be Replaced?

Even advanced brake pads are wear components and require regular inspection.

Replacement Is Recommended When:

• Pad material reaches the minimum safe thickness.
• Braking response becomes inconsistent or reduced.
• Increased stopping distances are noticed.
• Pads have been exposed to repeated high-temperature track use.
• During routine service of carbon ceramic braking systems.

Timely replacement protects the carbon ceramic discs and maintains braking performance.

Why Upgrade to 9m Carbon Ceramic Fast Road / Track Pads?

Standard brake pads are not designed to cope with carbon ceramic disc requirements.

Upgrade Advantages:

• Developed exclusively for 9m carbon ceramic brake discs.
• Low-metallic, resin-bonded compound with steel and aramid fibres.
• Excellent modulation and smooth release characteristics.
• Consistent low-to-medium friction level for predictable braking.
• Improved control and durability compared to OEM-style pads.
• Ideal for fast road driving and trackday use.

This upgrade ensures compatibility, performance, and protection of high-value carbon ceramic discs.

Compound & Fitment Highlights

• 9m OEM replacement compound       
• Low metallic, resin-bonded formulation
• Reinforced with steel and aramid fibres
• Consistent friction across temperature range
• Excellent modulation and release characteristics
• Rear axle fitment only

Key Benefits

•  Maintains OEM braking feel and performance       
• Optimised for carbon ceramic braking systems
• Predictable, fade-resistant braking performance
• Smooth pedal feel and controlled rear braking
• Ideal for fast road and trackday environments
• Protects high-value carbon ceramic discs

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M99735294790R

The product you are viewing cross references to these numbers