Manifold / Headers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs (38mm), Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

DesignTek Headers Cat Bybass



Fits:
Porsche 997 GT3 / GT3RS 2007>>

High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309706

The product you are viewing cross references to these numbers

Titanium exhaust manifold bolts M8x27. Torx head.
Pack of 18 pcs.



Fits:
Porsche 996 Turbo / GT2 / GT3 1999-2005
Porsche 997.1 Turbo / GT2 / GT3 2007-2009
Porsche 997.2 Turbo / GT2 RS / GT3 2010-2013

Porsche 991 Turbo / Turbo S / GT2RS  2014-2020

Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXLONG18

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers

Exhaust Bolt - Manifold to Catalytic Converter. M8 x 30
Material:  Titanium 
Price is EACH



Fits:
Porsche 997 MKI C2 / C4 / C2S / C4S
Porsche 997 MKII C2 / C4 / C2S / C4S
Porsche 991 MKI C2 / C4 / C2S / C4S

Porsche 987 Boxster MKI
Porsche 987 Boxster MKII
Porsche 981 Boxster MKI

Porsche 987C Cayman MKI
Porsche 987C Cayman MKII
Porsche 981C Cayman MKII

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01024426

The product you are viewing cross references to these numbers

Exhaust Manifold to Catalytic Converter Bolt.
M8 x 30. EACH



Fits:
Porsche 997 MKI C2 / C4 / C2S / C4S
Porsche 997 MKII C2 / C4 / C2S / C4S
Porsche 991 MKI C2 / C4 / C2S / C4S

Porsche 987 Boxster MKI
Porsche 987 Boxster MKII
Porsche 981 Boxster MKI

Porsche 987C Cayman MKI
Porsche 987C Cayman MKII
Porsche 981C Cayman MKII

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01024426

The product you are viewing cross references to these numbers

Exhaust manifold with 200 cell catalytic converter. Porsche 997.2

Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel. You may need lambda extensions if your car has engine check light on after installation.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109978

The product you are viewing cross references to these numbers

Exhaust manifold with cat bypass. These headers are offroad use only. 
These manifolds have an empty chamber that gives an impression you have catalytic converters on the car.

Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel and would provide gains of 15 BHP. Remapping of the car after fitment is highly recomended.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109975

The product you are viewing cross references to these numbers

Exhaust manifold with cat bypass. These headers are offroad use only.



Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel and would provide gains of 15 BHP. Remapping of the car after fitment is highly recomended.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109978

The product you are viewing cross references to these numbers

Exhaust manifold.


Fits:
Porsche 997 3.6L Turbo / GT2 2007-09
Porsche 997 3.6L GT2 RS 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 9 (LEFT) or 10 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611110

The product you are viewing cross references to these numbers

Exhaust Sport Headers.

Performance headers improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.

SOUND:
These headers will give you a significant volume increase and give your 911 a stronger flat 6 wail.

POWER:
Headers are often the most effective way to improve power on your naturally aspirated car and these sport headers are no exception. On our dynojet we saw gains of 8 whp and 14 ft/lbs of tq at 3000 RPM, 13 whp and 16 ft/lbs of tq at 4400RPM, and holds those gains all the way to redline.

FEATURES:
• Fits all Porsche 997.2 Carrera vehicles 2009-2011
• Improves power by 13 whp and 16 ft-lbs. of torque at 4500rpm
• Saves 4 lbs from the rear of the vehicle
• Includes multi-layer exhaust manifold gasket
• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance
• Investment-cast high-velocity 3-into-1 merge collectors for maximum performance
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement for the restrictive OEM headers
• Backed by the Fabspeed Lifetime Warranty

INSTALLATION NOTE:
To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

DISCLAIMER:
This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note:
This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9972SHDR

The product you are viewing cross references to these numbers

Exhaust Sport Headers.

Direct replacement for the restrictive OEM headers, offering improved power and throttle response throughout the RPM range.

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade material you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light.

FEATURES:

• Fits all Porsche 997.2 GT3 / GT3 RS (2010-2012)
• Includes German-imported HJS 200-Cell Tri-Metallic Sportcats
• Adds 21 whp and 32 ft-lbs of torque greatly increasing throttle response
• Saves 2 lbs from the rear of the vehicle
• CNC mandrel-bent 1pc primary header tubes
• High-velocity motorsports-style merge collector
• Constructed from T304 Stainless Steel
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

DISCLAIMER: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California.

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9972GT3SHDR

The product you are viewing cross references to these numbers