Replacement for Ceramic Disc

Replacement for CERAMIC Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type wet, front axle 380 x 34 mm left
- Brake disc type wet, front axle 380 x 34 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type wet, rear axle 350 x 28 mm left
- Brake disc type wet, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2113122

The product you are viewing cross references to these numbers

Replacement for CERAMIC Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2114122

The product you are viewing cross references to these numbers

Replacement for CERAMIC Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2109122

The product you are viewing cross references to these numbers

Two piece Zimmermann Formula:R front brake disc rotor.
Replacement for WITH Porsche Ceramic Brake (PCCB) 

Internally Vented, Perforated, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 34 mm
Bolt Hole Circle Ø: 130 mm
Centering Diameter: 98 mm
Total Height: 69 mm

For Track Use Only




Porsche 997 turbo - 2007 to 2012 - FRONT
Porsche 997 turbo S - 2007 to 2012 - FRONT


The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. Formula:R composite brake discs sometimes replace very expensive carbon-ceramic brake systems and are intended exclusively for use on the racetrack.
The composite technology with a light metal pot results in a significant weight reduction. This weight reduction leads to a clearly improved driving performance, since the brake discs are part of the unsprung mass. The ratio of unsprung to sprung mass is thereby increased in favor of the sprung mass. The traction and thus the control over the vehicle are noticeably improved.

Your advantages:

• Proven in racing
• Specially coated light metal pot and high-carbon cast friction ring with optimal thermal conductivity
• Highest performance of the disc even when it is temporarily hot
• Optimal ventilation and maximum stability thanks to sloping ribs in the ventilation channel
• Partly as a replacement for carbon-ceramic brake discs
• Free radial expansion through social connection of pot and friction ring
• Brake fading is avoided
• Sporty look with Z-grooves
• Developed exclusively for the race track

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735103

The product you are viewing cross references to these numbers

Two piece Zimmermann Formula:R front brake disc rotor.
Replacement for cars WITH Porsche Ceramic Brake (PCCB) 

Internally Vented, Perforated, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 34 mm
Bolt Hole Circle Ø: 130 mm
Centering Diameter: 98 mm
Total Height: 67.5mm

For Track Use Only




Porsche 997.1 GT3 - 2007 to 2008 - FRONT
Porsche 997.1 GT2 - 2007 to 2008 - FRONT


The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. Formula:R composite brake discs sometimes replace very expensive carbon-ceramic brake systems and are intended exclusively for use on the racetrack.
The composite technology with a light metal pot results in a significant weight reduction. This weight reduction leads to a clearly improved driving performance, since the brake discs are part of the unsprung mass. The ratio of unsprung to sprung mass is thereby increased in favor of the sprung mass. The traction and thus the control over the vehicle are noticeably improved.

Your advantages:

• Proven in racing
• Specially coated light metal pot and high-carbon cast friction ring with optimal thermal conductivity
• Highest performance of the disc even when it is temporarily hot
• Optimal ventilation and maximum stability thanks to sloping ribs in the ventilation channel
• Partly as a replacement for carbon-ceramic brake discs
• Free radial expansion through social connection of pot and friction ring
• Brake fading is avoided
• Sporty look with Z-grooves
• Developed exclusively for the race track