Air Induction Kits

GruppeM RAM AIR SYSTEMS epitomize the GruppeM philosophy of attention to detail. By replacing the factory air handling systems, increased airflow streams into the combustion chamber.

Fits:
Porsche 997 turbo - 2007 to 2008

On the GruppeM intake for the Porsche Turbo 997 2006>>, the factory ductwork is replaced with heat-shielding carbon fiber with enhanced inlets to capture the maximum amount of air. Lower intake air temperatures carry higher concentrations of oxygen, allowing for more energetic explosions and producing more horsepower and torque. Of course, reliability is never sacrificed -- high-efficiency, high-flow K&N air filter materials prevent contaminants from interfering with proper engine function.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FRI-0144

The product you are viewing cross references to these numbers

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera 2/4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera 2/4/4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera 2/4 (345bhp) 05/2002>>

Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33-2786

The product you are viewing cross references to these numbers

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 (996) 3.6L GT2 2001-05
Porsche 911 (996) 3.6L GT3 1999-05
Porsche 911 (996) 3.6L Turbo 2000-05


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33-2189

The product you are viewing cross references to these numbers

K&N Air Induction Kit for Porsche 996 / 997 3.6L

Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models
Porsche 997 C2 / C4 2005>>
3.6L Engines

Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive air box and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected moulded from cross link polyethylene which has the lowest thermal conductivity rating of any single-layered mould-able material available on the market today. This is key in keeping intake temperatures low and increasing power.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

57-7000

The product you are viewing cross references to these numbers

Rennline Carbon fibre air intake.



Fits:
Porsche 997.1 Turbo


Ever felt your 997.1 Turbo could use a bit more power?

With the Rennline Carbon Fibre Intake your drive will never feel better. This system provides improved flow dynamics that result in real-world power. Made from carbon fibre with black anodized aluminium MAF adapters and stainless steel fasteners, this Carbon Fiber intake performs as good as it looks.

Peak gains of +24 WHP/+4 ft-lbs torque on 100% Stock Vehicle (max gains of 27 WHP/22ft-lbs)

Peak gains of +9 WHP/+15 ft-lbs torque on APR ECU Upgrade with BMC air filter (max gains of 28 WHP/30 ft-lbs)

Rennline intake ducts carbon fibre. 

Fits:
Porsche 997 turbo Gen 1 - 2007 to 2009
Porsche 997 turbo Gen 2 - 2010 to 2013

Product Description

Rennline’s carbon fibre 997 Turbo intake ducts are a great way to give your 997's engine bay a modern facelift and these work in conjunction with our 997 Turbo Intake, to increase airflow and performance. 

Made from high quality carbon fibre using the latest technology, our intake ducts are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. Installs in minutes using new factory hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M66

The product you are viewing cross references to these numbers

This is only the replacement filter for the induction kit.

Replacement filter for GruppeM RAM AIR SYSTEMS epitomize the GruppeM philosophy of attention to detail. By replacing the factory air handling systems, increased airflow streams into the combustion chamber.

Shape type: Round taper (RT)
Flange inner diameter (F): 114mm
Filter Outer Diameter Base ( BO.D): 149mm
Filter Outer Diameter Top (TO.D): 114mm
Filter length (L): 114mm
Flange length (FL): 16mm
TOP: Taper Filter

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GMR-0945

The product you are viewing cross references to these numbers