IMS by EPS Brand

IMS Bearing Upgrade Kit with 58mm Flange for “Open” Engines (doing an engine rebuild) with Complete Ancillaries – Essential Reliability Upgrade for Porsche 997.1 Manual Models

This 58mm flange IMS bearing upgrade kit is specifically engineered for Porsche 997.1 manual cars fitted with M97 intermediate shaft bearings. Supplied as a complete installation package, the kit includes a strengthened bearing assembly, fresh mounting hardware, seals, exhaust clamps, sleeves and all additional ancillaries needed to complete the upgrade in one comprehensive service.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08

What the IMS Bearing Upgrade Kit Does

This complete kit:

• Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
  
• Reduces friction and improves lubrication stability
• Protects the intermediate shaft from premature wear
• Prevents metal debris contamination inside the engine
• Restores confidence in long-term engine reliability
• Includes all necessary hardware, clamps, sleeves and seals for a seamless installation

Designed to meet the demands of both road use and high-performance driving.

Why IMS Bearings Fail in Porsche M96/M97 Engines

Common causes include:

• Lubrication starvation, leading to ball bearing scoring
  
• Seal degradation, causing grease loss and overheating
  
• Contaminants entering the bearing assembly
• High engine speeds, accelerating wear
  
• Age-related material fatigue
• Inadequate internal lubrication flow in the early intermediate shaft design

Symptoms are often subtle—or non-existent—until severe engine damage has occurred.

Why the IMS Bearing Should Be Upgraded

Upgrading the IMS bearing provides:

• Prevention of catastrophic bearing failure
• Significant extension of engine lifespan
• Peace of mind for owners of 996/997/986/987 models
• A stronger, more stable bearing with improved lubrication path
• Reduction in maintenance costs over time
• A complete installation solution thanks to included ancillaries

This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.

IMS Bearing Upgrade Kit with 58mm Flange for “Open” Engines (doing an engine rebuild) with Complete Ancillaries – Essential Reliability Upgrade for Porsche 997.1 Tiptronic Models

This 58mm flange IMS bearing upgrade kit is specifically engineered for Porsche 997.1 manual cars fitted with M97 intermediate shaft bearings. Supplied as a complete installation package, the kit includes a strengthened bearing assembly, fresh mounting hardware, seals, exhaust clamps, sleeves and all additional ancillaries needed to complete the upgrade in one comprehensive service.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08

What the IMS Bearing Upgrade Kit Does

This complete kit:

• Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
  
• Reduces friction and improves lubrication stability
• Protects the intermediate shaft from premature wear
• Prevents metal debris contamination inside the engine
• Restores confidence in long-term engine reliability
• Includes all necessary hardware, clamps, sleeves and seals for a seamless installation

Designed to meet the demands of both road use and high-performance driving.

Why IMS Bearings Fail in Porsche M96/M97 Engines

Common causes include:

• Lubrication starvation, leading to ball bearing scoring
  
• Seal degradation, causing grease loss and overheating
  
• Contaminants entering the bearing assembly
• High engine speeds, accelerating wear
  
• Age-related material fatigue
• Inadequate internal lubrication flow in the early intermediate shaft design

Symptoms are often subtle—or non-existent—until severe engine damage has occurred.

Why the IMS Bearing Should Be Upgraded

Upgrading the IMS bearing provides:

• Prevention of catastrophic bearing failure
• Significant extension of engine lifespan
• Peace of mind for owners of 996/997/986/987 models
• A stronger, more stable bearing with improved lubrication path
• Reduction in maintenance costs over time
• A complete installation solution thanks to included ancillaries

This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.

62mm Flange IMS Bearing Upgrade Kit for “Closed” Engines with Full Ancillaries – The Ultimate Eternal Fix for Porsche 997.1 Manual Models

MUST USE OUR BORING TOOL IN ORDER TO INSTALL - the boring tool can be purchased or rented from us

This IMS bearing upgrade kit is engineered specifically for Porsche 997.1 manual cars with M97 intermediate shaft housings. This version is the Eternal Fix, a patented and significantly stronger alternative to ball-bearing-based designs. The kit includes a 62mm cylindrical IMS bearing with thrust control, plus all required ancillaries—hardware, exhaust clamps, sleeves, seals and fittings—ensuring a complete and professional installation.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08

Designed for “closed” engines, this IMS solution must be installed using a dedicated boring tool, allowing the bearing assembly to be pressed directly into the back of the engine without full teardown.

The Early 997.1 engines using the 62mm closed bearing are particularly vulnerable to IMS wear, lubrication issues and axial loading. The EPS cylindrical bearing design eliminates these weaknesses by separating axial load from radial load, making this the only true long-term IMS cure rather than a temporary replacement.

What This IMS Upgrade Kit Does

This advanced IMS upgrade:

• Permanently eliminates the weak factory-style ball bearing
• Uses a patented cylindrical roller bearing with dramatically higher load capacity
  
• Separates axial and radial loads to prevent premature bearing overload
  
• Improves lubrication via a dedicated oil-pressure feed kit
  
• Protects the intermediate shaft and cam drive system
• Allows installation without full engine disassembly (when used with the correct boring tool)
  
• Includes hardware, sleeves, exhaust clamps and seals for a complete upgrade

Designed for long-term reliability and motorsport-level durability.

Why the Original IMS Bearings Fail (Especially on 62mm Closed Engines)

Typical causes include:

• Ball bearing fatigue, leading to sudden collapse
  
• Axial load overload, which ball bearings cannot handle
  
• Oil contamination or lack of sufficient lubrication
• Heat cycling and material fatigue
• Seal degradation, allowing lubrication to escape
  
• Design limitations of the early intermediate shaft system

Closed-style engines are especially susceptible because the bearing is not easily inspectable and operates under higher load.

Why the Eternal Fix IMS Upgrade Is the Best Solution

This patented system offers:

• Over 12× the load capacity of traditional ball-bearing IMS solutions
  
• True separation of radial and axial loads, preventing roller overload
  
• A bearing that does not rely on side-loading, unlike conventional cylindrical or ball bearings
  
• An oil-fed outer race, ensuring stable lubrication
  
• A lifetime-capable design, not a service interval part
  
• A 5-year warranty for confidence and peace of mind
  
• Compatibility with closed engines using a precise boring tool

It is engineered to outlast the engine itself, making it the ultimate preventative upgrade for Porsche 997.1 manual cars.

62mm Flange IMS Bearing Upgrade Kit for “Closed” Engines with Full Ancillaries – The Ultimate Eternal Fix for Porsche 997.1 Tiptronic Models

MUST USE OUR BORING TOOL IN ORDER TO INSTALL - the boring tool can be purchased or rented from us

This IMS bearing upgrade kit is engineered specifically for Porsche 997.1 Tiptronic cars with M97 intermediate shaft housings. This version is the Eternal Fix, a patented and significantly stronger alternative to ball-bearing-based designs. The kit includes a 62mm cylindrical IMS bearing with thrust control, plus all required ancillaries—hardware, exhaust clamps, sleeves, seals and fittings—ensuring a complete and professional installation.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08

Designed for “closed” engines, this IMS solution must be installed using a dedicated boring tool, allowing the bearing assembly to be pressed directly into the back of the engine without full teardown.

The Early 997.1 engines using the 62mm closed bearing are particularly vulnerable to IMS wear, lubrication issues and axial loading. The EPS cylindrical bearing design eliminates these weaknesses by separating axial load from radial load, making this the only true long-term IMS cure rather than a temporary replacement.

What This IMS Upgrade Kit Does

This advanced IMS upgrade:

• Permanently eliminates the weak factory-style ball bearing
• Uses a patented cylindrical roller bearing with dramatically higher load capacity
  
• Separates axial and radial loads to prevent premature bearing overload
  
• Improves lubrication via a dedicated oil-pressure feed kit
  
• Protects the intermediate shaft and cam drive system
• Allows installation without full engine disassembly (when used with the correct boring tool)
  
• Includes hardware, sleeves, exhaust clamps and seals for a complete upgrade

Designed for long-term reliability and motorsport-level durability.

Why the Original IMS Bearings Fail (Especially on 62mm Closed Engines)

Typical causes include:

• Ball bearing fatigue, leading to sudden collapse
  
• Axial load overload, which ball bearings cannot handle
  
• Oil contamination or lack of sufficient lubrication
• Heat cycling and material fatigue
• Seal degradation, allowing lubrication to escape
  
• Design limitations of the early intermediate shaft system

Closed-style engines are especially susceptible because the bearing is not easily inspectable and operates under higher load.

Why the Eternal Fix IMS Upgrade Is the Best Solution

This patented system offers:

• Over 12× the load capacity of traditional ball-bearing IMS solutions
  
• True separation of radial and axial loads, preventing roller overload
  
• A bearing that does not rely on side-loading, unlike conventional cylindrical or ball bearings
  
• An oil-fed outer race, ensuring stable lubrication
  
• A lifetime-capable design, not a service interval part
  
• A 5-year warranty for confidence and peace of mind
  
• Compatibility with closed engines using a precise boring tool

It is engineered to outlast the engine itself, making it the ultimate preventative upgrade for Porsche 997.1 Tiptronic cars.

IMS Bearing Upgrade Kit with Full Ancillaries – Essential Reliability Upgrade for 997 Porsche M96/M97 Engines

This IMS bearing upgrade kit includes everything needed to replace and enhance the intermediate shaft bearing in Porsche M96 and early M97 engines. Designed for early 997.1 manual models, this complete package includes the upgraded bearing assembly, new hardware, seals, exhaust clamps, sleeves and all required ancillaries to streamline installation.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005 (engine code M96.05)
• Porsche 997 MK1 Carrera 2S 3.8L 2005 (engine code M97.1)**
• Porsche 997 MK1 Carrera 4 3.6L 2005 (engine code M96.05) 
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005 (engine code M97.1)**
  

What the IMS Bearing Upgrade Kit Does

This complete kit:

• Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
  
• Reduces friction and improves lubrication stability
• Protects the intermediate shaft from premature wear
• Prevents metal debris contamination inside the engine
• Restores confidence in long-term engine reliability
• Includes all necessary hardware, clamps, sleeves and seals for a seamless installation

Designed to meet the demands of both road use and high-performance driving.

Why IMS Bearings Fail in Porsche M96/M97 Engines

Common causes include:

• Lubrication starvation, leading to ball bearing scoring
  
• Seal degradation, causing grease loss and overheating
  
• Contaminants entering the bearing assembly
• High engine speeds, accelerating wear
  
• Age-related material fatigue
• Inadequate internal lubrication flow in the early intermediate shaft design

Symptoms are often subtle—or non-existent—until severe engine damage has occurred.

Why the IMS Bearing Should Be Upgraded

Upgrading the IMS bearing provides:

• Prevention of catastrophic bearing failure
• Significant extension of engine lifespan
• Peace of mind for owners of 996/997/986/987 models
• A stronger, more stable bearing with improved lubrication path
• Reduction in maintenance costs over time
• A complete installation solution thanks to included ancillaries

This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.

IMS Bearing Upgrade Kit with Full Ancillaries – Essential Reliability Upgrade for 997 Porsche M96/M97 Engines

This IMS bearing upgrade kit includes everything needed to replace and enhance the intermediate shaft bearing in Porsche M96 and early M97 engines. Designed for early 997.1 tiptronic models, this complete package includes the upgraded bearing assembly, new hardware, seals, exhaust clamps, sleeves and all required ancillaries to streamline installation.

Fits:

• Porsche 997 MK1 Carrera 2 3.6L 2005 (engine code M96.05)
• Porsche 997 MK1 Carrera 2S 3.8L 2005 (engine code M97.1)**
• Porsche 997 MK1 Carrera 4 3.6L 2005 (engine code M96.05) 
  
• Porsche 997 MK1 Carrera 4S 3.8L 2005 (engine code M97.1)**
  

What the IMS Bearing Upgrade Kit Does

This complete kit:

• Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
  
• Reduces friction and improves lubrication stability
• Protects the intermediate shaft from premature wear
• Prevents metal debris contamination inside the engine
• Restores confidence in long-term engine reliability
• Includes all necessary hardware, clamps, sleeves and seals for a seamless installation

Designed to meet the demands of both road use and high-performance driving.

Why IMS Bearings Fail in Porsche M96/M97 Engines

Common causes include:

• Lubrication starvation, leading to ball bearing scoring
  
• Seal degradation, causing grease loss and overheating
  
• Contaminants entering the bearing assembly
• High engine speeds, accelerating wear
  
• Age-related material fatigue
• Inadequate internal lubrication flow in the early intermediate shaft design

Symptoms are often subtle—or non-existent—until severe engine damage has occurred.

Why the IMS Bearing Should Be Upgraded

Upgrading the IMS bearing provides:

• Prevention of catastrophic bearing failure
• Significant extension of engine lifespan
• Peace of mind for owners of 996/997/986/987 models
• A stronger, more stable bearing with improved lubrication path
• Reduction in maintenance costs over time
• A complete installation solution thanks to included ancillaries

This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.