Rear Spoilers / Aerofoil

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-4-S

The product you are viewing cross references to these numbers

Air intake.



Fits:
Porsche 996 Turbo 2001-05

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P996.10.3000

The product you are viewing cross references to these numbers

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950555555

The product you are viewing cross references to these numbers

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK-BOOTS

The product you are viewing cross references to these numbers

Grille insert for 996 Ducktail

Fits:
Porsche 996 1998-05 fitted with P996 Ducktail

The vanes were angled to be as non-restrictive as possible to the air path into the engine bay. This means that the engine and air inlet are essentially open when viewed from the front but closed when viewed from the rear, which is good to keep falling leaves out.

The material we chose for the grille was carbon fiber infused PA12 nylon. It is superior to ABS and ASA every way. It's tougher, lighter and much more heat resistant.

Prevent spoiler warning MicroModule Device

Fixed wing or spoiler warning issues ? MicroModule Device™ is a great solution for 996 Turbo owners that have a FIXED WING or get the dreaded Spoiler Warning. For Turbos with integrated decklid and wing like the aerokit wing or other aftermarket wings. The MicroModule Device™ is easily hooked up to the factory wiring and PREVENTS all instances of the SPOILER WARNING. Less expensive than a new GT2 or GT3 lid wiring harness. Full set of illustrated step by step instructions emailed with order.

NOTE:  Included with every Rennkit eRam Kit.

Fits:
Porsche 996 Turbo 2001-2005




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

Micro-M

The product you are viewing cross references to these numbers

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 Turbo

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

2" eRam Kit™ electric wing system for 996 Turbo
Up/Down Speed of 5 sec.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-2-SS

The product you are viewing cross references to these numbers

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-3-S

The product you are viewing cross references to these numbers

4.75" eRam Kit™ electric wing system for 996 Turbo
Highest electric wing lift Kit™ possible - Similar height to GT3 and GT4 wings, provides the ultimate Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-475-S

The product you are viewing cross references to these numbers

Rear spoiler pump bracket.



Fits:
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651291700

The product you are viewing cross references to these numbers

Replica rear spoiler & boot lid. made to look like 996 GT2 rear spoiler. made from epoxy resin for higher strength. Made with OE hinges so it allows the top wing to tilt.



Fits:
1. Porsche Original 996 Carrera - Coupe
2. Porsche Original 996 C4S - Coupe
3. Porsche Original 996 Turbo - Coupe

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996512996

The product you are viewing cross references to these numbers