Cross Member & Parts

Rear Brake Duct Air Scoop.

Fits:
Porsche 996 GT2 2001-05
Porsche 996 GT3 2004>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99633112

The product you are viewing cross references to these numbers

Cross brace rear suspension. 
Sold each - 2 required per car



Fits:
Porsche 996 C2 / C4 / C4S - 1997 to 2004
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3 - 1999 to 2005
Porsche 997.1 C2 / C4 /C4S - 2005 to 2008
Porsche 997.1 turbo - 2007 to 2008
Porsche 997 GT3 - 2007 to 2012
Porsche 997.1 - 2005 to 2008

Click 'Zoom in' for large parts diagram.
Diagram ref no 10



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733108103

The product you are viewing cross references to these numbers

Cross brace rear suspension.  Sold each - 2 required per car
Mounted across the rear axle, it reinforces the suspension subframe and strut mounting points, reducing flex under load and improving overall stability. By keeping the suspension geometry tight, this brace helps maintain precise handling and extends the life of surrounding components.

Fits:
Porsche 996 C2 / C4 / C4S - 1997 to 2004
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3 - 1999 to 2005
Porsche 997.1 C2 / C4 /C4S - 2005 to 2008
Porsche 997.1 turbo - 2007 to 2008
Porsche 997 GT3 - 2007 to 2012
Porsche 997.1 - 2005 to 2008

Diagram ref no 10

What It Does: 

• The bracket reinforces the rear suspension geometry. It braces your Porsche's structure to reduce flex under load, improve stability, and maintain alignment under cornering or when encountering bumps. 
• Helps distribute loads through the rear suspension so that components like arms, bushings, struts, and mounts don’t shift or wear prematurely.

Why Replacement Matters: 

• If this bracket is damaged, bent, or weakened, you may experience rear-end instability, excessive movement in suspension under load, or handling that feels loose or unpredictable.
• Worn or misaligned brackets allow structural flex, which can accelerate wear in suspension arms and bushings.
• Proper reinforcement helps maintain ride and safety when driving hard or when the vehicle is aged.

You may need to replace the support brace if you hear clunking or knocking from the rear suspension, notice uneven tire wear, or feel looseness in the car’s handling. A visual inspection showing cracks, bends, or corrosion is another clear sign. It’s also smart to check this part after any rear impact, even a minor one, as damage can affect stability and alignment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733108103

The product you are viewing cross references to these numbers

Front Brake Duct Air Scoop.



Fits:
Porsche 996 - 1997 - 2001
Porsche 986 Boxster - 1997 to 2004

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634148

The product you are viewing cross references to these numbers

Front Brake Duct Air Scoop.



Fits:
Porsche 996 GT2 >>2002
Porsche 996 GT3 2002

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634111

The product you are viewing cross references to these numbers

Front brake duct air scoop.

Front left or right brake air duct or air scoop. This part is designed to improve brake cooling by directing air to the brakes. It is often described as a "spoiler" due to its shape and function. They are offended replaced due to getting damage as they are fitting so low to the ground. This product can be fitted for Boxster, Cayman, 996 , 997 models. 

Fits:
Porsche 997 GT2 2007-09
Porsche 997 GT2 RS 2010-13
Porsche 997 GT3 2007-11

Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734148

The product you are viewing cross references to these numbers

Front suspension control arm plate. Porsche 986 /996



Fits:
Porsche 986 1997-04
Porsche 996 1998-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634114506

The product you are viewing cross references to these numbers

Hexagon head bolt suspension - M10x40. 
Sold individually



Fits:
Porsche 993 - 1994 tp 1998 (suspension cross member)
Porsche 996 turbo tiptronic - 2000 to 2005 (tiptronic torque converter housing)

Click 'Zoom in' for large parts diagram.
Diagram ref no 7


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90037802101

The product you are viewing cross references to these numbers

The M10 hex nut is a versatile, high-strength fastener used across a wide range of Porsche models and assemblies. From suspension links to engine brackets, exhaust components, body fittings, and drivetrain hardware, this M10 nut ensures secure fastening and reliable torque retention where precision and durability are essential.

Manufactured to meet stringent automotive engineering standards, this nut provides excellent resistance to vibration, temperature variation, and long-term mechanical stress. Whether carrying out routine maintenance, restoring a classic model, or replacing aged hardware, this M10 hex nut is an essential component for maintaining structural integrity and correct assembly torque throughout your Porsche.

What Do M10 Hex Nuts Do?

M10 hex nuts are critical fasteners used to clamp, secure, and stabilise components throughout the vehicle.

Core Functions:
Provide secure threaded fastening in suspension, engine, exhaust, and chassis assemblies.
Maintain clamping force during high-load or high-vibration conditions.
Support correct alignment of mechanical components.
Ensure safety and structural strength across various mounting points.
Maintain torque settings essential for performance and reliability.

Why Do M10 Hex Nuts Fail?

Over time, fasteners experience wear, stress, and environmental exposure that can compromise their performance.

Common Causes of Failure Include:

• Corrosion from moisture, salt, or road debris.
• Thread wear from repeated installation or overtightening.
• Loss of clamping force from heat cycling or vibration.
• Rounded edges caused by incorrect tools or age.
• Metal fatigue leading to cracking or deformation.

A compromised nut can lead to loose fastenings, misalignment, and in some cases, component damage or safety issues.

Why Replace or Upgrade Your M10 Hex Nuts?

Replacing aged or worn nuts ensures proper fastener tension and maintains the reliability of the components they secure.

Key Benefits:

• Restores proper torque retention and fastening integrity.
• Prevents vibration-related loosening and component failure.
• Ensures corrosion resistance for long-term durability.
• Suitable for multiple Porsche applications across generations.
• Ideal for restoration projects, rebuilds, and preventative maintenance.
• Precision-engineered for a perfect, secure fit.

Fresh hardware is particularly important when servicing high-stress areas such as suspension mounts, exhaust fixtures, and drivetrain assemblies.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF008868

The product you are viewing cross references to these numbers

Hexagon-Head bolt, M 12 x1,5 x 80.
This hexagon-head bolt is used to secure the rear suspension cross-member on Porsche 996 and 997 models.
Sold each, required 4 per vehicle.

Fits:
Porsche 996 1998 - 2004 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models

Diagram ref no 4

• Function: This bolt is critical to the rear axle assembly, fastening the cross-member to the chassis and supporting overall suspension alignment and load distribution.
• Specification: M12 × 1.5 mm, Length and fitment aligned with factory requirements
• Supersedes: 90037813909

Bolts securing suspension cross-members endure constant dynamic stress, heat, and exposure to moisture. Over time, this can lead to corrosion, stretching, or loss of clamp force, potentially compromising alignment and safety.

When to Replace:
• During rear subframe or cross-member removal/reinstallation
• If original bolts show corrosion, thread damage, or deformation
• When performing a complete suspension overhaul or alignment service

Replacing with a high-spec OE Match bolt restores correct torque strength and alignment accuracy, ensuring factory-level performance and reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90037813901

The product you are viewing cross references to these numbers

Litronic headlamp leveling strut.



Fits:
For cars with Litronic headlights (M601)
Porsche 986 Boxster 1999-04
Porsche 996 Carrera 1999-04
Porsche 996 Turbo 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634137503

The product you are viewing cross references to these numbers

Rear Axle Support Stud. M 12 x 1.5 x 107.5



Fits:
Porsche 996 Carrera / Turbo 1998-05
Porsche 997 MKI Carrera / Turbo 2005-08
Porsche 997 MKII Carrera / Turbo 2005-08
Porsche 996 GT3 1999-05
Porsche 997 GT3 2007-11

This product supersedes Porsche's old part numbers:
- 99906110309

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906110301

The product you are viewing cross references to these numbers

Rear suspension cross member.

Fits:
Porsche 996 1998-04
Porsche 996 GT2 2001-05
Porsche 996 GT3 1999-04

Porsche 997 2005-08
Porsche 997 GT2 2007-09
Porsche 997 GT2 RS 2010-13
Porsche 997 GT3 2007-11

Diagram ref no 6.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733126102

The product you are viewing cross references to these numbers

Rear suspension support brace for vehicles with a manual transmission. This is the singular brace which runs perpendicular to the car's body - not to be confused with the two braces (x2 99733108103, ref. no. 10 in the parts diagram) which sit at an angle and form a triangular shape alongside this part.



Fits:
Porsche 996 Carrera 2 / 4 / 4S 1998-05*
Porsche 996 Turbo 2001-05*
Porsche 996 GT3 1999-05*

Porsche 997.1 Carrera 2 / 2S / 4 / 4S 2005-08*
Porsche 997.1 Turbo / GT2 2007-09*
Porsche 997.1 GT3 2007-11*

*Please be advised, this part is only correct for vehicles with a manual transmission. If your model is Tiptronic, you will need to order 99733117100 instead.