Track Control Arm REAR

Rear control arm bushing set.  Price is for 6 bushes. 
Designed to replace Porsche’s factory silent bloc in rear suspension link arms. Engineered for road use and built to OEM tolerances, this is a direct-fit, stock-spec solution for various Porsche 993.

Fits:
Porsche 993 1995-98 Stock Hardness

Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.

Stock-hardness – Restores performance and ride quality to original.

Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.

Features & Benefits

• OEM-equivalent rubber compound for a compliant, comfortable ride 
• Designed and manufactured in the EU with strict quality control 
• Backed by Prekom’s 2-year warranty  
• Straightforward installation; no modifications needed on stock link arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PR52004PKIT

The product you are viewing cross references to these numbers

Rear upper control arm set
This OE Match rear upper control arm kit is a complete suspension service set designed for Porsche 911 (993) models. The kit includes two rear upper control arms together with lock nuts and the eccentric alignment hardware required for installation, allowing proper mounting and rear suspension alignment adjustment. The control arms connect the rear wheel carrier to the chassis, forming part of the Porsche 993 multi-link rear suspension system and helping maintain precise wheel alignment and handling stability.
SET OF 2  control arms with bolts, nuts and washers

Fits:
Porsche 993 1994 - 1997 

Diagram ref no 5, 

Kit Includes
  2 × OE Match Rear Upper Control Arm  with Lock nut – 99333104703 + 99908444909
  2 × OE Match Eccentric Bolt – 99733121702
  2 × OE Match Eccentric Washer – PAF007648
  2 × OE Match Locknut – 99908444501

The rear upper control arm (often referred to as the rear forward suspension link) is a key component of the multi-link rear suspension used in Porsche 993 models. It links the rear wheel carrier to the chassis and allows controlled suspension movement while maintaining accurate wheel geometry.

This OE Match kit includes two control arms (left and right) along with the correct alignment hardware. The eccentric bolts and washers allow technicians to precisely adjust rear wheel alignment angles such as camber and toe, ensuring optimal handling and tyre wear.

By including the mounting hardware, the kit provides a complete installation solution suitable for suspension refurbishment or restoration work.

Rear suspension arms and their ball joints are exposed to constant load, road impacts and suspension movement. Over time they can develop play or wear, which may lead to poor handling, alignment drift or uneven tyre wear. Replacing both control arms together with new alignment hardware restores the correct suspension geometry and ensures reliable rear-axle stability.

When to Replace. Consider replacing the rear upper control arms if you notice:
•  Clunking noises from the rear suspension
•  Excessive movement or play in suspension joints
•  Uneven rear tyre wear
•  Alignment adjustments no longer holding correctly

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99333104703

The product you are viewing cross references to these numbers

Rear Toe, Camber, and Kinematic Control Arms.


Kit Includes :
(4) Upper Control Arms, (2) Toe Control Arms

Fits:
Porsche 993

If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links:
1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear.
2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.

Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Rennline arms come with all required bolts and machined bushings to get the job done. Rubber Boots not included but available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S7273741012415

The product you are viewing cross references to these numbers

The suspension control arms connect the suspension and steering knuckle to the chassis and allow the suspension to move and articulate over bumps and road imperfections. This kit also includes the sub-frame bushes.

Control arms utilize bushings and ball joints to make these connections and those are the parts of the control arm that wear out and fail. Worn ball joints and bushings will cause vibration and clunking when driving, uneven tire wear, cause the vehicle to pull in one direction, and increase stopping distances.

This control arm kit will restore the handling and driving performance of your 993. Included in our kit are the rear control arms for the left and right sides.

Fits:
Porsche 993 (911) C2 1994 - 1997
Porsche 993 (911) C4 1994 - 1997
Porsche 993 (911) C2S 1994 - 1997
Porsche 993 (911) C4S 1994 - 1997
Porsche 993 (911) TURBO 1994 - 1996
Porsche 993 (911) TURBO S 1994 - 1997 

Diagram ref No 3, 4, 5, 6 and bushes for number 2

Suspension Control Arm Kit

Control arms are crucial link in a vehicle's suspension connecting the suspension to a vehicle's subframe. These pieces are usually hinged to allow for suspension to travel and articulate as the vehicle rides over obstructions in the road and while the vehicle turns. Many vehicles such as those with independent suspensions have multiple links and feature several connection points and arms to offer better ride quality and comfort.

As bushings and joints in a control arm begin to wear you may notice a looseness feel in your suspension. And while many arms have replaceable and serviceable individual components, many still require the replacement of the entire arm.

Suspension Control Arm Kit Failure Symptoms

Play in suspension joints where these arms meet the subframe and/or knuckle Buckling noise emanating from the suspension Uneven tire wear Inability to properly align vehicle Shutter or vibration coming from the steering wheel at highway speed Wandering or pulling sensation from side to side felt on the steering wheel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT993

The product you are viewing cross references to these numbers

The suspension control arms connect the suspension and steering knuckle to the chassis and allow the suspension to move and articulate over bumps and road imperfections. Control arms utilize bushings and ball joints to make these connections and those are the parts of the control arm that wear out and fail. Worn ball joints and bushings will cause vibration and clunking when driving, uneven tire wear, cause the vehicle to pull in one direction, and increase stopping distances.

This control arm kit will restore the handling and driving performance of your 993. Included in our kit are the rear control arms for the left and right sides.

Fits:

• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) TURBO S 1994-97  

Suspension Control Arm Kit

Control arms are crucial link in a vehicle's suspension connecting the suspension to a vehicle's subframe. These pieces are usually hinged to allow for suspension to travel and articulate as the vehicle rides over obstructions in the road and while the vehicle turns. Many vehicles such as those with independent suspensions have multiple links and feature several connection points and arms to offer better ride quality and comfort.

As bushings and joints in a control arm begin to wear you may notice a looseness feel in your suspension. And while many arms have replaceable and serviceable individual components, many still require the replacement of the entire arm.

Suspension Control Arm Kit Failure Symptoms

Play in suspension joints where these arms meet the subframe and/or knuckle Buckling noise emanating from the suspension Uneven tire wear Inability to properly align vehicle Shutter or vibration coming from the steering wheel at highway speed Wandering or pulling sensation from side to side felt on the steering wheel       

Diagram ref No 3, 4, 5, 6 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT993.1

The product you are viewing cross references to these numbers