Rear Spoilers / Aerofoil

Rear ducktail spoiler carbon fibre - Targa and Cabriolet models

Fits:
Porsche 992.1 - 2019 to 2024 (Targa and Cabriolet models)
Porsche 992.2 - 2024 onwards (Targa and Cabriolet models)

Dissident's carbon fibre 992 Carrera Ducktail for targa and Cabriolet models features OEM+ grade fitment directly replacing the original plastic spoiler cover. The entire spoiler motor and mechanism remains and no electrical modifications are required for fitment. Once fitted the ducktail utilises the OEM spoiler motor to still lift and drop as it did previously. Fitment takes minutes and is 100% reversible should this ever be required.  Not cutting / drilling / bonding required. 

This item is suitable for all 992.1 & 992.2 Carrera Targa and Cabriolet Models. It is not suitable for Coupe Models or models fitted with an aero kit fixed wing. For Coupe models our specific Coupe ducktail should be selected. 

Please note
The Ducktail spoiler must be in the down position when operating the roof

The Ducktail is available in a range of finishes including  gloss lacquered visual carbon, bare / raw carbon and primer finished. We enclose a paint mask template to achieve the visual carbon panel shown in some of our images that flows from the engine cover. If you wish to have any visual carbon accents showing do not select an item in primer. 

All our components  feature our unique designs and are made by hand in the UK and cured via autoclave in carbon fibre / metallic tooling precision made tooling to deliver OEM grade components weave matched to standard OEM weaves used on mirrors and roof panels. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827952

The product you are viewing cross references to these numbers

Rear Spoiler Control Unit 971.2 / 976 Panamera / 992.1 Carrera / 9J1.2 Taycan / 992 GT3/RS/ST



Porsche 992.1 Carrera 2019 - 2021
Porsche 992 GT3/RS/ST 2021 onwards
Porsche 9J1.2 Taycan  2024 onwards
Porsche 971.2 Panamera 2021-2024
Porsche 976 Panamera 2024 onwards

Porsche 971.1 Panamera 2017 - 2020 *Note: Technical bulletin applies to this model, additional parts are required to install to existing vehicle wiring. See Technical Information


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAA907483

The product you are viewing cross references to these numbers

Rear spoiler wing blade - Carbon Fibre
Spoiler blade only, wing tips sold separately

Fits:
Porsche 992 GT3 - 2019 Onwards

Rear wing blade available in the following finish
Gloss Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1016.992.08

The product you are viewing cross references to these numbers

Rear spoiler wing end plates - Carbon Fibre. 
Sold as a pair

Fits:
Porsche 992 GT3 - 2019 Onwards

Rear wing end plates available in the following finish
Gloss Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1016.992.07

The product you are viewing cross references to these numbers

Rear wing end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3 - 2019 onwards

Premium Carbon fiber wing endplates for the Porsche 992 GT3.

We reimagined the design of the rear end of the 992 GT3 and the OEM plastic wing endplates are an easy first upgrade for your GT3. Over 30% larger for improved aero efficiency yet 50% lighter than the OEM units, the lift-to-drag ratio is improved with the larger surface area of the endplates under the leading edge of the rear wing. 

The larger endplates help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. Our design builds on the OEM units by correcting two important lines, the first is the rear ducktail wing and the other one spills into the rear arches and window. A perfect marriage of form and function.

Weighing in at only 150 grams each. The endplates are made by hand from prepreg carbon of the highest quality. Using aluminium molds and baked to perfection. Our inner skeleton structure is made out of CFRP that is light weight but gives the hollow structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with the same adhesive Porsche uses from the factory (3M VHB)
We also include a small bottle of primer liquid from 3M, that will further improve the bond of your Porsches new wings. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new Ångström endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Laminated with a skeleton manufactured from high-grade, heat and chemically resistant CFRP
• Improved design and aesthetics
• Larger surface area reducing vortices
• Enhanced aerodynamic performance
• Use OEM adhesion method (3M VHB™)
  
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827867

The product you are viewing cross references to these numbers

Rear wing increased angle of attack bracket kit. Porsche 992 GT3



Fits:
Porsche 992 GT3

The Verus Engineering Increased AOA (Angle Of Attack) Mount Kit replaces the factory mounts and allows for a wider range of angles with the OEM wing spoiler blade. This means more rear downforce from the factory wing, while retaining OEM adjustment, OEM looks, and OEM feel. The units bolt directly into the carbon wing exactly like the OEM units and are produced in house on our 5-axis CNC mills out of 6061-T6 aluminum.

Utilizing state-of-the-art analysis software during the R&D process, we were able to ensure that the OEM wing improved performance by increasing the AOA (Angle of Attack). Using in house scan data during the design process, we were able to design the wing mounts with aesthetics that follow the factory Porsche design language and bolts on like an OEM piece.

These units are great for owners that believe the car to need a slight bump in rear downforce to settle the car at speed, or as part of our Ventus 1 package that offers a slight bump in overall vehicle downforce, front and rear. Add performance, improved aesthetics, and function to your 992 GT3 with these simple to bolt on units.

Kit Includes

• Left Mount
• Right Mount

Features
Increase Downforce Generated by OEM Wing
Improved Overall Aerodynamic Efficiency
Better High-Speed Stability
Reduce Lap Times
Simple Bolt-On Installation

Specifications
CFD Designed and Tested
6061-T6 Machined Construction
CNC Cut in House in the USA
Porsche Design Language and Factory Fit and Feel

Rennline swan neck rear wing delete kit. 



Fits:
Porsche 992 GT3 2022 Onwards

Do you love your 992 GT3 but wish you could easily swap between the factory swan neck and something a little more subtle? 

Product Description

Easily convert your GT3 into a GT3 touring with our rear wing delete kit. 

Our kit allows you to swap between the factory Swan Neck and the GT3 wing delete in a matter of minutes, utilising the factory hardware and premium materials.

This kit comes with everything you need for a simple and clean installation.

• Fits all 992 GT3 2022 Onwards
• No Modifications Necessary
• 3D Scanned, Designed In Cad
• Easily reversible
• Save weight - Over 11lbs
• Hand Laid Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E335

The product you are viewing cross references to these numbers

Rear wing kit carbon fibre. Porsche 992 GT3

Fits:
Porsche 992 GT3

The UCW Rear Wing is a great addition to your Porsche 992 GT3 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. The UCW wing bolts on exactly like the factory wing, for an easy, sub 20 minute install.

Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X.  Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed on the car and performs well at various angles of attack.

During the design process; we utilized in-house scan data.  This results in a product that features a near OEM fit and finish.

The UCW Rear Wing is the perfect addition to the track goer or street car enthusiast who requires a large bump in rear downforce to balance out a significant front aero package.

Kit Includes

• Rear Wing Element Assembly x 1
• Rear Wing Carbon Endplate x 2
• Hardware Kit, Includes All Parts Necessary for a Seamless Install

Features
Optimized Airfoil Using ANSYS Adjoint Solver
Improved Efficiency (L/D)
Increased Downforce
Bolts to OEM Uprights
Capable of Generating and Withstanding 500+lbs of Downforce
Capable of Balancing Out Significant Front Aerodynamic Systems

Specifications
Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
Machined Billet Aluminum Wing Mounts
Fully Carbon Fiber Endplates, 3D Shaped
Stainless Hardware Throughout

Wing plate for rear spoiler. Black



Fits:
Porsche 992 GT3 2021>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT82759

The product you are viewing cross references to these numbers