Catalyst / Bypass

Link pipe set (SS) was tested and developed together with Slip-On Race Line (Titanium) system.

Fits:
Porsche 911 (992) Carrera /S/4/4S/Cabriolet 2019 - 2020 OPF/GPF models

To take the Slip-On Race Line (Titanium) to the next level of its tuning potential, the Link Pipe Set w Cat (SS) is a high-flow set of link pipes with 300 cpsi sport catalytic converters to provide increased performance and add a soundtrack that is truly enthralling. Made from high-quality stainless steel, the addition of these pipes makes remapping the ECU mandatory to get the full potential from the system. With this pairing the sound becomes not just captivating to listen to, but one that gives other senses a thorough workout. The symphonic aural experience gives the engine a broader spectrum of sound, letting the occupants of the car fully enjoy the sporty character of the engine through the exhaust tones.

When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

L-PO

The product you are viewing cross references to these numbers

Cat Bypass Pipes.



Fits all Porsche 992 Carrera / Carrera S 3.0L Twin Turbo flat-six vehicles (2019+)

FEATURES:
• Direct replacement bolt-on Competition Race pipes that quickly eliminate the factory OEM Porsche stock catalytic converters.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.
• Fabspeed Race Competition pipes can be installed in under 2 hours for "OFF-ROAD Competition Racing Events Track Days." Easy-on / Easy-off for weekend warriors / Drivers.
• 100% Made in the USA system. Finest components and materials guaranteed.
• CNC HAAS Machined T304L billet inlet flanges hand TIG welded to 70mm 2.75" CNC Mandrel bent USA T304L tubing
• 321L stainless steel heat-shield wrapped.
• Bolt-on ready to go, most aggressive RACE • Competition style sound enhancement for these cars. Works with all stock Porsche 992 rear exhaust systems PSE and regular base models.
• Lifetime warranty, these parts explicitly intended for Off-Road Race Competition and Racetrack closed-course driving events.
• Enjoy maximum sports car sound and power in under a simple, less than 2 hour installation.
• Easily and quickly reversible

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992CB

The product you are viewing cross references to these numbers

Control line for pressure difference sensor.
Downstream of gas. particulate filter.



Fits:
Porsche 992.1 Carrera 2019>>

Click 'Zoom in' for large parts diagram,
Diagram ref no 13 (left) or 14 (right)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9922511

The product you are viewing cross references to these numbers

Exhaust race headers with cat bypass.

Fits
Porsche 992 GT3 4.0L / GT3RS

Performance headers improve exhaust flow and sports car sound; Sport Headers Bypass Catalytic Converters.

Sport catalytic converters bypass for maximum performance, please these are to be used with tuned or remapped cars only.
Constructed from equal-length T304 stainless steel
C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
More power and torque across the RPM band and dramatically improved sports car sound
Direct replacement for the OEM headers with no cutting or welding required

Key technical information and benefits of the Exhaust Race Headers with Cat Bypass for Porsche 992 GT3 by DesignTek:

Enhanced Performance: DesignTek's Exhaust Race Headers with Cat Bypass are engineered to significantly improve the performance of your Porsche 992 GT3. They reduce exhaust restriction, allowing for better airflow and increased horsepower and torque.

Weight Reduction: These race headers are typically lighter than the stock exhaust components, contributing to reduced overall vehicle weight. This weight savings can enhance the GT3's handling and responsiveness.

Exhaust Note: The race headers produce an aggressive and exhilarating exhaust note, providing a more engaging driving experience. They create a distinctive sound that complements the GT3's high-performance character.

Catalytic Converter Bypass: By bypassing the catalytic converter, these headers are designed for track-oriented driving. This helps maximize exhaust flow and performance, but it may not be street-legal in all areas. Please check local regulations before installation.

Durable Construction: Crafted from high-quality materials, DesignTek's race headers are built to withstand the demanding conditions of track use. They offer long-lasting durability and reliability.

When considering the purchase of Exhaust Race Headers with Cat Bypass for your Porsche 992 GT3, here are some factors to keep in mind:

Compatibility: Ensure that the race headers are compatible with your specific Porsche 992 GT3 model. Compatibility information can typically be found in the product specifications or by consulting with a knowledgeable retailer or Porsche specialist.

Track Use: These headers are primarily designed for track use due to the cat bypass. If you intend to use them on public roads, check local emissions and noise regulations to ensure compliance.

Professional Installation: It is highly recommended to have the race headers installed by a professional technician with experience in Porsche exhaust systems. Proper installation ensures optimal performance and avoids potential issues.

At Design911, we specialize in providing high-quality Porsche parts and accessories, including DesignTek's Exhaust Race Headers with Cat Bypass for the Porsche 992 GT3. Our team of experts can assist you in finding the correct headers for your GT3, offering professional advice and guidance throughout the selection and installation process. With our expertise and extensive product range, we are dedicated to helping you enhance your Porsche's performance and driving experience. Contact us today to explore our offerings and receive personalized assistance with your Porsche upgrade needs.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109924

The product you are viewing cross references to these numbers

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

100390100392

The product you are viewing cross references to these numbers

Milltek Sports T304 Stainless OPF/GPF Back System, Valved (PSE).

Fits:
Porsche 992.1 3.0T Carrera S / GTS / Dakar 2019>>
For Cars With Gasoline Particulate Filter (GPF) And Porsche Sports Exhaust (PSE)

Parts Assembly:


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO194

The product you are viewing cross references to these numbers

Sport catalytic converter 200 Cell with heatshield. Set of 2 | requires gaskets 2 x 9A725311500/1



Fits:
Porsche 992 Carrera / Carrera S 3.0L Twin Turbo flat-six vehicles (2019+)
*Cars with petrol particulate filter

FEATURES:
• Direct replacement bolt-on high-flow catalytic converters.
• Louder and sportier car sound and power!
• CNC Mandrel bent tubing done in house on Unison mandrel bender
• Stainless steel heat shield- wrapped catalytic converter cores.
• Easy to fit

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109922

The product you are viewing cross references to these numbers

Sport catalytic converter bypass. Set of 2 (one pair) 



Fits:
Porsche 992 Carrera / Carrera S 3.0L Twin Turbo flat-six vehicles (2019+)

FEATURES:
• Direct replacement bolt-on high-flow catalytic converters bypass.
• Flow 90+% of a straight pipe versus stock for more sports car sound and power!
• CNC Mandrel bent tubing done in house on Unison mandrel bender
• Stainless steel heat shield- wrapped catalytic converter cores.
• Enjoy more sports car sound and power
• Easily and quickly reversible

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109921

The product you are viewing cross references to these numbers

Sport Catalytic Converters.

Fits all USA SPEC Porsche 992 Carrera / Carrera S 3.0L Twin Turbo flat-six vehicles (2019+)

FEATURES:
• Direct replacement bolt-on German high-flow catalytic converters that can be exchanged in under 2 hours for the stock 700+ cell ceramic OEM catalytic converters
• Flow 90+% of a straight pipe versus stock for more sports car sound and power!
• The very finest components were all 100% sourced from the USA and Germany for this system.
• CNC HAAS machined billet T304L inlet flanges. Hand TIG welded to HJS German Trimetallic Imported Euro 6 wash coated brazed HD catalytic converters. No Check Engine Lights
• CNC Mandrel bent USA T304L tubing done in house on Unison mandrel bender
• 321L stainless steel heat shield- wrapped catalytic converter cores.
• Bolt-on ready to go, best possible 1st sound enhancement for these cars.
• Enjoy more sports car sound and power
• Easily and quickly reversible
• At Fabspeed we were the 1st company in the World to design and develop 992 systems.
• Lifetime Warranty - Street / Racetrack, No excuses, No hassles. Best Warranty in the World.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992SC

The product you are viewing cross references to these numbers

Exhaust sport headers with 200 cell catalytic converter.

Fits
Porsche 992 GT3 4.0L / 992 GT3RS

Performance headers improve exhaust flow and sports car sound; Sport Headers Bypass Catalytic Converters.

• Sport catalytic converters increase performance (these are to be used with tuned or remapped cars only)
• Constructed from equal-length T304 stainless steel
• C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Direct replacement for the OEM headers with no cutting or welding required

Key technical information and benefits of the Exhaust Sport Headers for Porsche 992 GT3 by DesignTek:

Enhanced Performance: DesignTek's Exhaust Sport Headers are engineered to significantly improve the performance of your Porsche 992 GT3. They reduce exhaust restriction, allowing for better airflow and increased horsepower and torque.

Exhaust Note: The sport headers produce an exhilarating exhaust note, providing a more engaging driving experience. They create a distinctive sound that complements the GT3's high-performance character.

Catalytic Converter Cell reduction: By reducing the catalytic converter, these headers are designed for track-oriented driving. This helps maximize exhaust flow and performance, but it may not be street-legal in all areas. Please check local regulations before installation.

Durable Construction: Crafted from high-quality materials, DesignTek's race headers are built to withstand the demanding conditions of track use. They offer long-lasting durability and reliability.

When considering the purchase of Exhaust Race Headers with Cat Bypass for your Porsche 992 GT3, here are some factors to keep in mind:

Compatibility: Ensure that the race headers are compatible with your specific Porsche 992 GT3 model. Compatibility information can typically be found in the product specifications or by consulting with a knowledgeable retailer or Porsche specialist.

Track Use: These headers are primarily designed for track use due to the cat bypass. If you intend to use them on public roads, check local emissions and noise regulations to ensure compliance.

Professional Installation: It is highly recommended to have the race headers installed by a professional technician with experience in Porsche exhaust systems. Proper installation ensures optimal performance and avoids potential issues.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109926

The product you are viewing cross references to these numbers

Sports exhaust 200 cell catalytic converters 992 turbo and turbo S 200 for cars with Gasoline Particulate Filter GPF



Fits Porsche 992 turbo and turbo S WITH GASOLINE PARTICULATE FILTER (GPF)

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REDUCTION - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

GASOLINE PARTICULATE FILTER - GPF REMOVAL
To reduce back pressure on the exhaust and increase noise output, this component removes the standard GPF.

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 70mm
This is the diameter of the main pipe of the exhaust system

HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Sports exhaust 200 cell catalytic converters 992 turbo and turbo S 200 for cars without Gasoline Particulate Filter GPF



Fits Porsche 992 turbo and turbo S WITHOUT GASOLINE PARTICULATE FILTER (GPF)

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REDUCTION - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

GASOLINE PARTICULATE FILTER - GPF REMOVAL
To reduce back pressure on the exhaust and increase noise output, this component removes the standard GPF.

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 70mm
This is the diameter of the main pipe of the exhaust system

HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Fit Porsche 992 Carrera and Carrera S with Gasoline Particulate Filter (GPF)



The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it.

MATERIAL - AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 65mm
This is the diameter in mm of the main pipe of the ehxaust system.

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Fit Porsche 992 Carrera / Carrera S / turbo /turbo S WITHOUT Gasoline Particulate Filter (GPF)



The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it.

MATERIAL - AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 65mm
This is the diameter in mm of the main pipe of the ehxaust system.

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Sports exhaust catalytic converter delete pipes (Left and Right).



Fits
Porsche 992 turbo 3.8Ltr 2020 Onwards
Porsche 992 turbo S 3.8Ltr 2020 Onwards

Pair of Stainless steel Sports Exhaust catalytic converter delete pipes (Left and Right)

TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P0.006.C01

The product you are viewing cross references to these numbers

Sports exhaust catalytic converter delete pipes Porsche 992 turbo and 911 turbo S 2020 onwards



Fits Porsche 992 turbo and turbo S 2020 onwards

It fits both on GPF and no GPF models. On NO GPF models it should be used the attached plugs to close GPF sensors connections

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it.

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 65mm
This is the diameter in mm of the main pipe of the exhaust system.

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction.

ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on.
In this case, the installer must reprogram the software to eliminate the light

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.