Rear Spoilers / Aerofoil

Rear Wing Kit UCW 



Fits:
Porsche 991.1 GT3 - 2012 to 2016
Porsche 991.2 GT3 - 2016 to 2018

The UCW rear wing is a great addition to your 991 GT3 to significantly increase downforce at the rear, increase confidence on track, and reduce lap times.

Verus Engineering developed the UCW rear wing to bridge the gap between our swan neck high-efficiency rear wing and our 300mm V1X airfoil.  With the 250mm curved chord, the UCW makes more downforce than the high-efficiency rear wing and significantly more downforce than similarly sized competitor wings.

Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X.  Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed and performs well.

During the design process; we utilised in-house scan data. This results in a product that features a near OEM fit and finish.

The UCW wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package.

Kit Includes

• Carbon Rear Wing Element, 250mm Chord
• Carbon Endplate (2)
• Machined Aluminum Wing Mount (2)
• Machined Aluminum Wing Upright (4)
• Hardware Kit, Includes All Hardware Necessary for Install

Features
Optimized Airfoil Using ANSYS Adjoint Solver
Improved Efficiency (L/D)
Increased Downforce
Bolts to OEM Trunk In Place of OEM Unit
Capable of Generating and Withstanding 500+lbs of Downforce
Capable of Balancing Out Significant Front Aerodynamic Systems

Specifications
Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
Machined Billet Aluminum Uprights
Machined Billet Aluminum Trunk Mounts
Stainless Hardware Throughout

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

A0211A

The product you are viewing cross references to these numbers

Rear wing riser kit.



Fits:
Porsche 991 GT3

The Verus Engineering OEM Wing Riser Kit not only improves performance of the factory rear wing, but also improves visibility out the rear window of your 991 GT3. This means an increase in rear downforce and a rear view mirror that functions better then before. The units are produced in house on our 5-axis CNC mills out of 6061-T6 aluminum.

Utilizing state-of-the-art analysis software during the R&D process, we were able to ensure that the OEM wing improved performance. Using in house scan data during the design process, we were able to design the wing risers with aesthetics that follow the factory Porsche body lines and bolts on like an OEM piece.

Add performance, improved aesthetics, and function to your 991.1 or 991.2 GT3 with these simple to bolt on units.

Kit Includes

• Left Wing Riser
• Right Wing Riser
• Hardware Kit, Includes All Necessary Hardware for Install

Features
Increase Downforce Generated by OEM Wing
Improved Overall Aerodynamic Efficiency
Better High-Speed Stability
Reduce Lap Times
Simple Bolt-On Installation

Specifications
CFD Designed and Tested
6061-T6 Machined Construction
CNC Cut in House in the USA
Stainless Hardware is Used Throughout 

Rear wing spoiler extension.
With TÜV parts certificate (§19.3), Also recognized in Switzerland.



Fits:
Porsche 991 Turbo | Turbo S
Not for models with original Aerokit.

The 991 Turbo rear spoiler extension ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

Our 991 Turbo rear spoiler extension ensures the highest possible downforce. The original height adjustment and lowering are of course unchanged. The Porsche active aerodynamic rear spoiler functional capability stays and is not impaired.

MOSHAMMER® Patented mounting system, plug & play without drilling, and no screwing!

This Rear wing spoiler extension is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P991.20.3020

The product you are viewing cross references to these numbers

• Rear reinforced plastic (FRP)
• Wet Carbon Fibre
• Dry Carbon Fibre

Replacement rear louvers, Carbon Fibre. 

Fits:
Porsche 991.1 Carrera

Rennline’s new carbon fibre louvers are a great way to give your 991.1 Carrera an OEM+ look and a modern upgrade. Made from high quality carbon fibre using the latest technology for a factory fit and finish while adding a bit of style. Installation is a breeze, pop your OEM covers off and snap on your new carbon fibre parts!

High quality carbon fibre construction, using the latest technologies
3-piece carbon fibre replacements for factory decklid
OEM fit and finish
Fits all 991.1 Carrera
Designed using dimensions from OEM panels
OEM attachment points
Installs in minutes using basic hand tools

Side cover rear spoiler. 

Fits:
Porsche 991.1 Carrera / Carrera 4 - 2012 to 2016

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150466

The product you are viewing cross references to these numbers

SportDesign Package.



The SportDesign package includes not only the SportDesign front apron with distinctive spoiler lip, but also a rear spoiler that emphasises the ultra-sporty look of the new 911 model range and helps to reduce lift.

If your vehicle is already equipped with the SportDesign package, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment.

Note: reduces ground clearance. To preserve aerodynamic stability, front and rear spoilers may not be fitted separately.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>
Porsche 991 Carrera / Carrera S CABRIO 2012>>

OPTIONS:
1. 99104480284 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480285 - For cars with Bi-Xenon (Headlamp Cleaning System) 
3. 99104480286 - For cars with PDC
4. 99104480287 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please Select below

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99104480

The product you are viewing cross references to these numbers

Swan neck rear spoiler kit, carbon fibre. 

Fits:
Porsche 991.1 GT3
Porsche 991.2 GT3 RS
Porsche 991.2 GT2 RS

Dramatically improve rear-end grip at speed with our 300mm chord, swan neck rear wing. The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance on and off the track.

The wing is a large driving force behind the improvement in downforce, coupled with the front splitter it transforms the GT3RS into a track weapon.

The rear wing was designed, iterated, and tested in CFD and a wind tunnel. All component mounting was designed off OEM scans and requires no permanent modification to the rear hatch of the vehicle.

The uprights are CNC machined from 6061-T6 aluminum and were FEA analyzed to ensure strength was kept high while weight was minimized. 

Kit Includes

• Carbon Rear Wing, 300mm Swan Neck
• Carbon Vented Endplate (2)
• Machined 6061 Swan Neck Upright (2)
• Machined 6061 Chassis Mount Bracket (2)
• Machined Delrin Chassis Stop (2)
• Gurney Flap
• 3m VHB Double-Sided Tape, Gurney Flap
• Hardware Kit, Includes All Hardware Necessary for Install

Features

Rear Wing
2x2 Twill, 3k, Pre-Preg Carbon Fiber
Cured in an AutoClave
Carbon Inner Rib for Strength
Carbon Endplates
The Wing Itself Weighs in at Under 9 lbs

Mounting
Machined 6061-T6 Aluminum Mounts and Uprights
Military Spec (NAS) Hardware On Wing
Bolts on like OEM
Zero Permanent Modifications to the Chassis

Specifications
CFD Optimized Airfoil
Highly Efficient (Great L/D)
15 Total Adjustment Angles (-1 to 14 degrees)
Lightweight and High Strength
Capable of Generating and Handling Over 700lbs of Downforce at 120MPH
Swan Neck Design for Improved Efficiency from the Wing Element
OEM Bolt-On Install

Touring package add on lip for rear spoiler. Primed.



Fits:
Porsche 991 R/GT3/RS 11/2017 - 12/2020  Touring models 

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150428182G2X

The product you are viewing cross references to these numbers