Front Spoilers / Bumpers

Aerokit Cup Sport Design update package. Porsche 991 Coupe
This package comprises the SportDesign package (Sport Design front apron and rear spoiler)



Only for 911 Carrera Coupe models.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99104480093

The product you are viewing cross references to these numbers

Aerokit Cup Sport Design update package. Porsche 991 GTS Coupe
This package comprises the SportDesign package (Sport Design front apron and rear spoiler)



Only for 911 Carrera GTS Coupe models.

Fits:
Porsche 991 Carrera GTS COUPE - 2012 to 2016

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99104480079

The product you are viewing cross references to these numbers

Aerokit Cup.



This package comprises the SportDesign package (SportDesign front apron and rear spoiler) as well as a modified front spoiler lip and a fixed-wing profile on the rear spoiler. Tested and refined in the Porsche wind tunnel, the components increase downforce on both axles and improve handling. They also emphasise the 911's sporting heritage.

If your vehicle is already equipped with the SportDesign front apron or SportDesign package, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment.

Note: reduces ground clearance. To preserve aerodynamic stability, front and rear spoilers may not be fitted separately.

Only for 911 Carrera Coupé models.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>

OPTIONS:
1. 99104480088 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480089 - For cars with Bi-Xenon (Headlamp Cleaning System)
3. 99104480090 - For cars with PDC
4. 99104480091 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please Select below


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991044800

The product you are viewing cross references to these numbers

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016

The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

Front air duct splitters - Front grill blades, Carbon Fibre.

Fits:
Porsche 991.1 2012-16 Carrera S models only
This will not fit GTS or SportDesign package.

Rennline’s new carbon fibre front air duct splitters are a great way to give your 991.1 an OEM+ modern appearance while adding a bit of style. Installs in place of the factory grill splitters for a trouble free and satisfying install.

High quality hand-laid pre-impregnated carbon fibre construction
Finished in UV protecting gloss clearcoat
Complete carbon fibre replacement for factory splitters
Designed from OEM grill components
OEM fit and finish

Front bumper air duct splitters, Carbon Fibre.



Fits:
Porsche 991.1 2012-16 Carrera models only

Rennline’s new carbon fibre front air duct splitters are a great way to give your 991.1 an OEM+ modern appearance while adding a bit of style. Installs in place of the factory grill splitters for a trouble free and satisfying install.

High quality hand-laid pre-impregnated carbon fibre construction
Finished in UV protecting gloss clearcoat
Complete carbon fibre replacement for factory splitters
Designed from OEM grill components
OEM fit and finish

Carbon fibre Front bumper air outlet inserts.
Manufactured in carbon fibre prepreg autoclave molded with clear glossy finish.



Fits:
Porsche 991.1 Turbo

Install as replacement of original parts.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC99104480076

The product you are viewing cross references to these numbers

Front bumper air vent grill.
With TÜV parts certificate (§19.3).



Fits:
Porsche 991.1 Carrera / Turbo
Porsche 991.2 Carrera / Turbo

The 991 front bumper air vent grill ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

An important component for both cooling and aerodynamics. Ensuring the rapid removal of hot air. Optimized unit cooling.

This front bumper air vent grill is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P991.20.1010

The product you are viewing cross references to these numbers

Front bumper Canard set. Porsche 991.1 turbo



Fits:
Porsche 991.1 Turbo 2014 - 2016

Front bumper Canard set in carbon fibre
Sold as a pair



Fits:
Porsche 991.1 GT3 2014 - 2017


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991.1GT3CARBFRTCAN

The product you are viewing cross references to these numbers

Front bumper canards in high gloss carbon fibre. 



Fits:

Porsche 991.1 911 GT3
Porsche 991.1 911 GT3RS
Porsche 991.1 911 R
Porsche 991.2 911 GT2RS

Designed to increase downforce to front end in conjunction these front bumper canards (dive planes) are made using pre-preg autoclave carbon fiber with a high gloss finish. 

Installation can be done with double sided tape to prevent the drilling of holes into factory front bumper.

Sport Design Look Front bumper suitable for Porsche 911/991 year of construction from 09/2011
Suitable for all model / body variants except Turbo / Turbo S

• Including mounting accessories, if necessary
• Including assembly instructions
• No expert opinion at the moment, therefore individual acceptance according to §21 StVZO required. On request, we can deliver this item with a material report.
• Front bumper is made of the innovative and high-quality material Fiberflex. The advantages of this new composite material: Extremely high flexibility combined with great stability, shatter resistance and non-flammability. A very high production quality and the low weight even allow it to be used in professional racing. The characteristic black surface is characterized by good processing options and guarantees professional results.
• Uniform surface structure enables painting without extensive preparatory work (product is unpainted)
• Material is flexible3

• We also offer the front extension FA227 to match this bumper.

Front bumper intake trims in Carbon.



Fits:
Porsche 991.2 GTS 2017-19