Exhaust Package

Akrapovic Titanium Exhaust System.

Fits:
Porsche 911 (991) Carrera /S/4/4S/GTS 2012>>
Porsche 911 (991) Carrera /S/4/4S/GTS 2012>> CABRIO

It's a challenge to develop an aftermarket exhaust for the great 911. The Akrapovič engineers have prepared a superb system with a dual nature. By using the optional Akrapovic sound kit, the driver can fully control the exhaust valves, which are controlled by the car's electronics if no optional part is used. When the valves are closed, the 911 sounds deeper than stock, but not louder. When the valves are open, expect a completely opposite, pure racing sound, with adrenaline-pumping bangs. Keeping the drone effect away was one of the main tasks. The Slip-On is made of special heat-resistant durable titanium alloy, with computer-designed premufflers, main mufflers, and pipes to deliver more power, more torque, weight reduction, and improved throttle reponse.


TECHNICAL DATA
Maximum power:
- kW: plus 13.2 at 4050 rpm
- HP (m): plus 18 at 4050 rpm
- HP (i): plus 17.7 at 4050 rpm

Maximum torque:
- Nm: plus 35 at 4000 rpm
- lb-ft: plus 25.8 at 4000 rpm

Weight:
- minus 8.8 kg / 19.4 lb



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S-PO991SO-HT

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Titanium sports exhaust system.



Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601173170

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Exhaust VALVETRONIC system with Cat-bypass and Tail pipes. Stainless steel.

Fits:
Porsche 991.1 Turbo

For Wiring Diagram please CLICK HERE

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009121

The product you are viewing cross references to these numbers

CARGRAPHIC Sport Exhaust System with GT3-look tailpipe center outlet, cylinder-head back with exhaust valves.
SOUND / SUPER SOUND Version

Fits:
Porsche 991.1 Carrera 2 / 4 3,4L
Porsche 991.1 Carrera 2S / 4S / GTS 3,8L

Consisting of:
•  CARGRAPHIC Sport Manifold Set with 2" / 50,80mm primaries with 2x 200cpsi Ø130mm HD Tri-metal catalytic converters
•  CARGRAPHIC Center Silencer Replacement, 2-piece X-pipe construction, open with merged gas flow and 2 integrated exhaust valves
•  CARGRAPHIC Wheel-arch silencer set with flex-pipe connection
•  CARGRAPHIC 100mm / 4,0" Sport Double-end tailpipes, GT3-Look, round, slash-cut with stainless steel liner made from SS304L stainless steel - Version: Carbon-Matt

SOUND / SUPER SOUND Export Version

SOUND / SUPER SOUND Version - switchable dual mode:

•  Valves closed: Quieter tuned enhanced sporty SOUND note, practical pleasant cruising mode
•  Valves open: Aggressive amplified enhanced SUPER SOUND note, sharper, crisper and volume increasing freer flowing mode - also accompanied with burbling and backfire with every application of the accelerator pedal

NO DRONE OR RESONATION even with further CARGRAPHIC exhaust components

Features:
•  Perfectly matched exhaust components
•  Performance manifold set with optimized exhaust flow
•  Fully OBD2 compliant - No CEL / Check-Engine Light
•  Absorptive silencer design
•  CNC mandrel-bent pipework, which allows exhaust pipes with constant diameter.
•  Integrated vacuum exhaust valves
•  Fully made from SS304L stainless steel
•  High performance components, dyno tested
•  Olive- and slide connections enables easy installation and perfect adjustment
•  Aeroquip fittings allow heat expansion without cracking
•  Reinforced laser-cut brackets
•  Exhaust valve specification as used by OE / factory manufacturers
•  Reduced backpressure due to freer flowing
•  Reduced operating temperature
•  Maximized performance
•  Improved throttle response, freer revving
•  Improved enhanced acoustics with no drone, resonation or vibration
•  Improved low level tone with sharper, crisper and volume increasing sound with revs
•  Model specific tuned sound still in keeping with the marque
•  Weight reduction

PERFORMANCE - Made in Germany
20KW(27PS) more power and 24Nm additional torque

Attention:
•  A corresponding body conversion kit with matching end pipe cut-out is required for installation
•  Porsche 991.1 Carrera S and GTS 3.8l models: The use of the factory installed valve control (also PSE) is still possible. Optionally, our performance valve control can be used, which also offers the function of opening the exhaust valves permanently.
•  Porsche 991.1 Carrera 3,4l models: Require our separately available performance valve control, with which the exhaust gas valves are permanently opened or automatically controlled according to the rpm. Alternatively, it is also possible to retrofit and use the control unit of the Porsche Sport exhaust system (PSA / SAGA).

CARGRAPHIC SS304L lightweight stainless steel tailpipe trims are optionally available in the following finishes:
•  Stainless steel mirror polished
•  Matt-Black Thermopaint
•  Gloss-Black enamelled
•  Visual-Carbon Matt-Finish with stainless steel liner
•  Visual-Carbon Gloss-Finish with stainless steel liner
•  Visual-Carbon Gloss-Finish with perforated insert


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PERP91KITXGT3

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Titanium exhaust system with titanium valve and titanium tail pipe.



Fits:
Porsche 991.1 Turbo


For Wiring Diagram please CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009120

The product you are viewing cross references to these numbers