Control Arms Rear
Refine by Car Type
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
Filter by brand
358
Product Information
Type: None Adjustable Thrust Arm Bushing
RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.
The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.
Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.
RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.
Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.
Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.
Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).
Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.
Please Check Fitting Guide Before Ordering Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
358
The product you are viewing cross references to these numbers
Product Information
RSS Lower Control Arm Kit for Porsche Models.Type: None Adjustable Thrust Arm Bushing
RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.
The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.
Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.
RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.
Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.
Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.
Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).
Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.
Please Check Fitting Guide Before Ordering Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
358
357
358
99634105307
99634105308
99634105309
99634105310
99634105311
99634105312
99634105313
99634105314
99634105315
99634105316
99634105317
99634112290
99634144190
99634112190
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
€1,387.39 inc. BTW
Now €1,318.02 inc. BTW
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
2260009
Product Information
1 kit required per vehicle - includes 4 monoball bearings (two for each lower control arm).
Porsche 991 Carrera 2/4/GTS 2012-19
Porsche 991 Turbo 2014-20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260009
The product you are viewing cross references to these numbers
Product Information
Elevate your Porsche’s performance with our high-quality monoball kit, designed for precision, durability, and ease of installation.1 kit required per vehicle - includes 4 monoball bearings (two for each lower control arm).
Porsche 991 Carrera 2/4/GTS 2012-19
Porsche 991 Turbo 2014-20
Features:
Spherical Bearings for Ultimate Precision - Replace factory rubber bushings with hardened-steel spherical bearings for free motion on multiple axes. This eliminates deflection commonly seen with rubber bushings, ensuring precise toe and camber alignment.
Machined for a Perfect Fit - High-tolerance housing allows for a simple press-fit installation, with correct spacers for accurate fitment.
Weather Sealed for Durability - Hard-anodized monoball housing and spacers resist wear and corrosion, while proprietary rubber seals protect the precision bearings from road contaminants to extend product life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260009
99133104303
99133104320
9P1505223
9P1505223B
99133104403
99133104420
9P1505224
9P1505224B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€1,012.23 inc. BTW
Now €961.62 inc. BTW
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
2260008
Product Information
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Our Eccentric Lower Wishbone Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing rear camber, as needed.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260008
The product you are viewing cross references to these numbers
Product Information
Rear lower wishbone eccentric monoball kit. 1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Our Eccentric Lower Wishbone Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing rear camber, as needed.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260008
2260008
99133105302
9P1505311
99133105310
99133105321
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€722.01 inc. BTW
Now €685.90 inc. BTW
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
BBIDOGBONE991
Product Information
Fits
991.1 and 991.2 Carrera and Carrera S
991.1 and 991.2 Carrera 4 and Carrera 4S
991.1 and 991.2 GTS
991.1 and 991.2 turbo
Product Description:
The BBi Autosport "Dogbone" Rear arm set upgrades the factory control arms with machined and anodized units designed to house spherical bearings.
The full set replaces the arms with rubber bushings and bring back control, stability and predictability in the suspension - much like the RS models.
These are fully serviceable parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBIDOGBONE991
The product you are viewing cross references to these numbers
Product Information
BBi Autosport rear dogbone arm set. Fits
991.1 and 991.2 Carrera and Carrera S
991.1 and 991.2 Carrera 4 and Carrera 4S
991.1 and 991.2 GTS
991.1 and 991.2 turbo
Product Description:
The BBi Autosport "Dogbone" Rear arm set upgrades the factory control arms with machined and anodized units designed to house spherical bearings.
The full set replaces the arms with rubber bushings and bring back control, stability and predictability in the suspension - much like the RS models.
These are fully serviceable parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBIDOGBONE991
99133104703
9P1505397A
99133106104
9P1505237B
99133104303
9P1505223B
99133104320
99133104403
9P1505224B
99133104420
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€4,792.14 inc. BTW
Now €4,217.09 inc. BTW
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
2260015
Product Information
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260015
The product you are viewing cross references to these numbers
Product Information
Rear track rod concentric monoballl kit. 1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260015
2260015
99133106104
9P1505237B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€1,057.53 inc. BTW
Now €1,004.65 inc. BTW
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
2260013
Product Information
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260013
The product you are viewing cross references to these numbers
Product Information
Rear track rod eccentric monoballl kit. 1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260013
2260013
99133106104
9P1505237B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€976.83 inc. BTW
Now €927.98 inc. BTW
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
226001
Product Information
1 x tool required per application
Fits
Porsche 991 - Rear
Porsche 991 Turbo - Rear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
226001
The product you are viewing cross references to these numbers
Product Information
Rear upright wheel carrier bushing tool. 1 x tool required per application
Fits
Porsche 991 - Rear
Porsche 991 Turbo - Rear
Simplify the installation process of Monoball products and replacement bushings.
Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.
We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
226001
2180017
2180018
99133111103
99133111104
99133111203
99133111204
99133104303
9P1505223B
99133104420
99133104403
9P1505224B
99133104320
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Choose Version
Prices from: €114.32 inc. BTW
Shop Securely
12 Month Warranty
Worldwide Delivery
99133111212/1
Product Information
Price is EACH
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133111212
The product you are viewing cross references to these numbers
Product Information
Rear wheel carrier concentric bush (shock absorber mount). Price is EACH
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133111212
99133111103
99133111104
99133111112
99133111113
99133111203
99133111204
99133111205
99133111212
99133161112
99133111105
99133111120
99133111121
99133111220
99133111221
99133111133
99133111134
99133111233
99133111234
99133111213
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€110.42 inc. BTW
Now €104.90 inc. BTW
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99133111212/2
Product Information
Price is EACH
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133111212
The product you are viewing cross references to these numbers
Product Information
Rear wheel carrier concentric bush (control arm mount). Price is EACH
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133111212
99133111103
99133111104
99133111112
99133111113
99133111203
99133111204
99133111205
99133111212
99133161112
99133111105
99133111120
99133111121
99133111220
99133111221
99133111133
99133111134
99133111233
99133111234
99133111213
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€140.15 inc. BTW
Now €133.14 inc. BTW
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
2260011
Product Information
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear wheel carrier bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes two monoball bearings… one for each rear wheel carrier
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260011
The product you are viewing cross references to these numbers
Product Information
Rear wheel carrier concentric monoball kit. 1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear wheel carrier bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes two monoball bearings… one for each rear wheel carrier
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260011
2260011
99133105302
9P1505311
99133105310
99133105321
99133111112
99133111113
99133111212
99133161112
99133111103
99133111104
99133111203
99133111204
99133111205
9913311105
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€495.50 inc. BTW
Now €470.72 inc. BTW
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
360
Product Information
SET OF 4. FRONT AXLE ONLY
The RSS Adjustable Thrust Arm Bushing Kit will improve handling and response in 987. 997, 981, GT4, 991 GT3 variants, suspension systems and allows for additional caster adjustments. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.
AVAILABLE FOR ALL PORSCHE® 987,981, GT4, 997, 991 and 991 GT3, and 991 TURBO
NOT FOR 997 GT3/GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360
The product you are viewing cross references to these numbers
Product Information
ADJUSTABLE THRUST ARM BUSHING KIT (For vehicles equipped with Hydraulic Thrust Arm Bushings Only).SET OF 4. FRONT AXLE ONLY
The RSS Adjustable Thrust Arm Bushing Kit will improve handling and response in 987. 997, 981, GT4, 991 GT3 variants, suspension systems and allows for additional caster adjustments. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.
AVAILABLE FOR ALL PORSCHE® 987,981, GT4, 997, 991 and 991 GT3, and 991 TURBO
NOT FOR 997 GT3/GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360
360
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
€342.60 inc. BTW
Now €325.47 inc. BTW
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
3-256
Product Information
Fits
Porsche 991 GT3 OE Front Control Arms
Porsche 981 GT4 Front and Rear Control Arms
Porsche 986, 987, 996, 997 with GT3/RS OE Front or Rear Split Control Arms,
Fits any RSS Tarmac Series Lower Control Arm or replaces any OE Porsche Split Arm Inner Bushing.
Provides a Bolt On Mono-Ball Performance Solution replacing rubber mounted OE inner mono-balls. RSS Longer studs allow for more negative camber adjustment / gain vs. OE inner bushing. For camber shim kits see RSS Part # 308.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3-256
The product you are viewing cross references to these numbers
Product Information
Inner Spherical Bearing (Mono-ball) End Kit: SET OF 2. Fits
Porsche 991 GT3 OE Front Control Arms
Porsche 981 GT4 Front and Rear Control Arms
Porsche 986, 987, 996, 997 with GT3/RS OE Front or Rear Split Control Arms,
Fits any RSS Tarmac Series Lower Control Arm or replaces any OE Porsche Split Arm Inner Bushing.
Provides a Bolt On Mono-Ball Performance Solution replacing rubber mounted OE inner mono-balls. RSS Longer studs allow for more negative camber adjustment / gain vs. OE inner bushing. For camber shim kits see RSS Part # 308.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3-256
3-256
996 341 441 90
99634144190
99734104198
99734104298
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman GT4 3.8L 2015-16
€649.81 inc. BTW
Now €617.32 inc. BTW
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
300
Product Information
Price: One Alignment Shim
RSS alignment shims are designed for use with factory or aftermarket 2-piece motorsport style control arms. Perfect for obtaining more negative camber and adjusting track width during setup.
Shims are available in a variety of sizes including 1mm, 2mm, 3mm, 5mm, 7mm, 10mm and 11mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
300
The product you are viewing cross references to these numbers
Product Information
Lower Control Arm Adjusting Shims for Porsche Models Price: One Alignment Shim
RSS alignment shims are designed for use with factory or aftermarket 2-piece motorsport style control arms. Perfect for obtaining more negative camber and adjusting track width during setup.
Shims are available in a variety of sizes including 1mm, 2mm, 3mm, 5mm, 7mm, 10mm and 11mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
300
30014
30015
30016
30017
30018
30074
99634154390
99634154391
99634154392
99634154393
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Select Below
Prices from: €20.85 inc. BTW
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
301
Product Information
Fits:
Porsche 991 GT3 / GT3 RS
Porsche 991 GT2 RS
Price: One Alignment Shim
RSS alignment shims are designed for use with factory or aftermarket 2-piece motorsport style control arms. Perfect for obtaining more negative camber and adjusting track width during setup.
Shims are available in a variety of sizes including 1mm, 2mm, 3mm, 5mm, 7mm, 10mm and 11mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
301
The product you are viewing cross references to these numbers
Product Information
RSS Lower Control Arm Adjusting Shim - Rear. Fits:
Porsche 991 GT3 / GT3 RS
Porsche 991 GT2 RS
Price: One Alignment Shim
RSS alignment shims are designed for use with factory or aftermarket 2-piece motorsport style control arms. Perfect for obtaining more negative camber and adjusting track width during setup.
Shims are available in a variety of sizes including 1mm, 2mm, 3mm, 5mm, 7mm, 10mm and 11mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
301
30190
30191
30192
30193
30194
30195
99133105381
99133105380
99133105382
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Select Below
Prices from: €20.18 inc. BTW
Shop Securely
12 Month Warranty
Worldwide Delivery
380
Product Information
Includes:
1 x Tapered Stud,
1 x Upper Lock Nut,
1 x Lower Lock Nut and
4 x Roll Center Spacers/Washers.
1 Kit Per RSS Lower Control Arm (Fits: Part #s: 356, 357, 361, 372, 373, 374 and 366).
USER NOTE: A new 380 Kit should be installed once ball joint pin has been removed from hub. See Lower Control Arm Notes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
380
The product you are viewing cross references to these numbers
Product Information
RSS Tarmac Series Lower Control Arm - Outer Ball Joint Pin Rebuild Kit. 1 Kit Per RSS Lower Control Arm (Fits: Part #s: 356, 357, 361, 372, 373, 374 and 366)Includes:
1 x Tapered Stud,
1 x Upper Lock Nut,
1 x Lower Lock Nut and
4 x Roll Center Spacers/Washers.
1 Kit Per RSS Lower Control Arm (Fits: Part #s: 356, 357, 361, 372, 373, 374 and 366).
USER NOTE: A new 380 Kit should be installed once ball joint pin has been removed from hub. See Lower Control Arm Notes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
380
380
356
357
361
372
373
374
366
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
€98.35 inc. BTW
Now €93.44 inc. BTW
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
397
Product Information
Assortment Pack: (2 of each size) 1mm, 2mm, 3mm, 8mm 10mm.
Fits: Porsche OE 2-Piece rear lower control arm set.
Fits:
Porsche 991 GT3/GT3/RS
Made in the USA
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
397
The product you are viewing cross references to these numbers
Product Information
RSS Tarmac series rear alignment / camber shim Assortment Pack: (2 of each size) 1mm, 2mm, 3mm, 8mm 10mm.
Fits: Porsche OE 2-Piece rear lower control arm set.
Fits:
Porsche 991 GT3/GT3/RS
Made in the USA
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
397
397
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
€230.76 inc. BTW
Now €219.22 inc. BTW
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Also found on these pages
About Control Arms Rear
Upgrade Your Porsche Suspension with Adjustable Rear Control Arms: Technical Specifications and Benefits
Technical specifications of Adjustable Rear Control Arms:
- Adjustable rear control arms are suspension components designed to provide precise adjustment of the vehicle's rear suspension geometry.
- They are typically made from high-strength steel or lightweight alloys for durability and performance.
- Adjustable rear control arms feature threaded or eccentric mounts that allow for fine-tuning of camber and toe settings.
- They come in various designs and lengths to fit different Porsche models and suspension setups.
- Adjustable rear control arms are available as upgrade options or standard replacements for Porsche vehicles.
Benefits of upgrading or replacing Adjustable Rear Control Arms for your Porsche:
Enhanced rear suspension geometry: Adjustable rear control arms allow for precise adjustment of camber and toe angles, optimizing the rear suspension geometry for improved handling, stability, and tire wear.
Improved cornering performance: By fine-tuning the rear suspension settings, adjustable control arms can help reduce understeer or oversteer tendencies, enhancing the vehicle's cornering capabilities and overall balance.
Increased traction and grip: Proper alignment of the rear wheels achieved through adjustable control arms ensures optimal tire contact with the road surface, resulting in improved traction, grip, and acceleration.
Minimized tire wear: By maintaining proper rear alignment, adjustable control arms help prevent uneven tire wear and extend the lifespan of your tires, saving you money in the long run.
Customizability and adaptability: Adjustable rear control arms offer the flexibility to adjust the rear suspension settings to suit specific driving preferences, track conditions, or modifications made to the vehicle.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of adjustable rear control arms designed specifically for Porsche models, including both OEM replacements and performance upgrades. Our knowledgeable team is dedicated to helping you find the right control arms for your Porsche, considering factors such as model, year, suspension setup, and desired adjustments. With our expertise and commitment to customer satisfaction, we can guide you in selecting the perfect control arms to enhance your Porsche's suspension performance and handling characteristics. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your needs.
You may also like
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Drop links Front
-
Drop links Rear
-
Top mounts Front
-
Top mounts Rear
-
Steering Track Rods
-
Rear Sub Frame
-
Air Lift System
-
Suspension Control Units
-
Bilstein B4 Standard Replacement
-
Bilstein B4 (Cars with PASM Button)
-
Bilstein SPORT B6 Dampers
-
Bilstein SPORT B6 (Cars with PASM Button)
-
Bilstein B14 PSS Coilover Suspension Kits
-
Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
-
Bilstein B16 DampTronic (PASM)
-
Bilstein EVO SE / EVO R
-
Ohlins Road & Track Suspension
-
Classic |Safari & Coil Over Kits
-
Motorsport & Track
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Black Series Bushes
-
H&R Adjustable Suspension Kits
-
H&R Cup-Kit Sport Suspension
-
KW Height Adjustable Springs
-
KW Variant 1 Inox Suspension kits
-
KW Variant 2 Inox Adjustable Rebound Damping Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
KW HLS (Hydraulic Lift System)
-
KW DDC with ECU Coilover Kit
-
Eibach Pro-Tronic PASM Cancellation Kits
-
Sachs Performance Suspension CSS
-
Nitron Automotive Range
-
Arnott Europe Air Suspension Products
Popular Models
