Wiring harness

Break out test harness for 964 engine

Fits:
Porsche 964 - 1989 t 1994

14 x test lead for: 
1. Starter signal
2. Speed sender (only type 01 harness)
3. Resistor blower
4. Oil press
5. Back up light supply
6. Back up light from switch
7. NTC Blower
8. NTC Blower
9. Oil press (warning)
10. #30
11. Charge light / excitation
12. #30
13. Engine fan
14. Ground

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

Comes with a detailed drawing showing function of each wire.

• As original colored wiring.
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964607017

The product you are viewing cross references to these numbers

Break out harness for 964 engine injector signals

Fits:
Porsche 964 - 1989 t 1994

10 x test lead for:
1. Ground
2. Injector cylinder 5
3. Injector cylinder 6
4. Injector cylinder 3
5. Injector cylinder 1
6. Injector cylinder 4
7. Injector cylinder 2
8. Common Injectors
9. Ground
10. Oil temp.

A valuable tool in every Porsche workshop.

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

Comes with a detailed drawing showing function of each wire.

• As original colored wiring.
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964607016

The product you are viewing cross references to these numbers

ECU and Ignition system conversion kit.

Fits
Porsche 964 C2 - 1989 to 1994
Porsche 964 C4 - 1989 to 1994

This kit is a modern update to the 964 (911) ignition system. This system takes the management of the car into the digital age and allows greater control over ignition and fueling.

The kit will replace your restrictive old fashioned air flow meter (barn door) with a modern MAP sensor managed by intake pressures.

The kit is delivered ready to use with a PPT ignition map. We have maps for 3.6 and 3.8 conversions, and either can be pre-installed for you.

Our latest kit now comes with an upgraded ECU and can run a wide band sensor (oxygen sensor).
Our kits include this capability but the sensor needs to be ordered separately.

While developing the upgraded ECU we also changed our intake pipe; this now works with the factory airbox, gives a stock appearance in the engine bay and houses the map sensor and air temp sensor out of sight.

Kit includes:
• Delta 700 ECU
• Direct plug in wiring loom
• Map Sensor and air temp sensor
• Air intake pipe
• 6 Bosch injectors
• Vacuum pipe and T connector
• Support and service by PIE Performance
• Can Bus data connection tool

All our kits are 100% reversible, with no need to drill or alter components, we utilise what already exists

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964PPT

The product you are viewing cross references to these numbers

Front harness for headlight, turn signals and side marker lights 964.

Fits:
Porsche 964 

• 2 x 7 pole Milspec super seal connector
• 2 x H4 connectors for headlamp
• 2 x Turnsignal lights connection
• 2 x side marker lights (including sockets)
• 2 x grommet

Plug & play harness

Comes with detailed connection diagram.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink tube!)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96461200475

The product you are viewing cross references to these numbers

Hazard warning relay plug socket 4 pole.



Fits:
Porsche 911 - 1970to 1989
Porsche 964 - 1990 to 1994
Porsche 968 - 1992 to 1995
Porsche 914 - 1970 to 1976
Porsche 924S - 1986 to 1988
Porsche 944  - 1982 to 1991

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161233400

The product you are viewing cross references to these numbers

Turn signal wiring harness. NR 177.



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 993 >>1996

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161217702

The product you are viewing cross references to these numbers

Wiring harness for the lamp in the front luggage compartment. 

Fits:
Porsche 911 1972-89 
Porsche 911 Turbo 1975-89
Porsche 964 1989-94
Porsche 959 1987-88

Diagram ref. 16. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161204422

The product you are viewing cross references to these numbers