Throttle Body / Plenum Chamber

Metal bracket - fixes to throttle body. 

Fits:
Models With Automatic Speed Control & Plastic Throttle Body (Not Magnesium)
Porsche 964 Carrera 1989-94

Diagram ref. 18. 

*PR 454 - Automatic Speed Control

NOTE: This bracket is compatible only with the plastic throttle bodies on later Porsche 964 models. It is not compatible with earlier 964 models that have magnesium throttle bodies.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411021902

The product you are viewing cross references to these numbers

Drive by wire throttle body intake system - Carbon Fibre. 
Throttle body diameter - 82mm



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects' complete Drive-by-Wire (DBW) intake system, designed specifically for 964 and 993 engines to be converted to DBW (drive by wire) throttle body.

Our system includes:

• 6 precision-engineered runners crafted from anodized structural aluminum
• 2 anodized fuel rails, also made from structural aluminum for durability and performance
• Dual GT3-style intake manifolds in carbon fiber for weight reduction and strength
• Intake T-tube in glass-reinforced thermoplastic, compatible with a 82mm DBW throttle body
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with a vacuum actuator
• 6 high-temperature silicone couplers for the manifold-to-runner connections
• 4 high-temperature silicone couplers for the manifold-to-T-tube/resonance flap connections
• TMAP sensor for accurate air intake measurements
• Vacuum reservoir for optimized engine performance
• All mounting hardware made from lightweight titanium alloy

Inlet port sizes: 42mm

Weighing just 5.5 kg (12 lbs), our intake system is nearly half the weight of the stock 964 intake, which weighs 11.5 kg (25.3 lbs), offering a substantial weight savings for enhanced performance

Why our system?

• 50% lighter than stock. Lighter than most systems given use of carbon fiber, thermoplastics, and titanium.
• Direct mount of fuel rail to the runner for perfect injector press fit.
• CNC machined PTFE inserts in between the cylinder head and the runner for a superior insulation from the heat from the cylinder heads, especially when in idle and street applications.
• Custom nitrile O-rings in between the runner and the cylinder head, and the intake T and throttle body for a perfect seal
• Silverlake’s precision-molded OEM+ silicone sleeves with a much higher temperature resistance than rubber, offering a perfect fit with the opposing components for better airflow, and an unmatched appearance.
• All mounting fasteners in Tin coated titanium alloy, for reduced weight and un unbeatable appearance
• Your choice between 82mm or 92mm drive by wire throttle bodies, the latter offering 25% more surface for high displacement high performance applications

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99311062704

The product you are viewing cross references to these numbers

Drive by wire throttle body intake system - Glass Reinforced Thermoplastic. 
Throttle body diameter - 82mm



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects' complete Drive-by-Wire (DBW) intake system, designed specifically for 964 and 993 engines to be converted to DBW (drive by wire) throttle body.

Our system includes:

• 6 precision-engineered runners crafted from anodized structural aluminum
• 2 anodized fuel rails, also made from structural aluminum for durability and performance
• Dual GT3-style intake manifolds in carbon fiber for weight reduction and strength
• Intake T-tube in glass-reinforced thermoplastic, compatible with a 82mm DBW throttle body
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with a vacuum actuator
• 6 high-temperature silicone couplers for the manifold-to-runner connections
• 4 high-temperature silicone couplers for the manifold-to-T-tube/resonance flap connections
• TMAP sensor for accurate air intake measurements
• Vacuum reservoir for optimized engine performance
• All mounting hardware made from lightweight titanium alloy

Inlet port sizes: 42mm

Weighing just 5.5 kg (12 lbs), our intake system is nearly half the weight of the stock 964 intake, which weighs 11.5 kg (25.3 lbs), offering a substantial weight savings for enhanced performance

Why our system?

• 50% lighter than stock. Lighter than most systems given use of carbon fiber, thermoplastics, and titanium.
• Direct mount of fuel rail to the runner for perfect injector press fit.
• CNC machined PTFE inserts in between the cylinder head and the runner for a superior insulation from the heat from the cylinder heads, especially when in idle and street applications.
• Custom nitrile O-rings in between the runner and the cylinder head, and the intake T and throttle body for a perfect seal
• Silverlake’s precision-molded OEM+ silicone sleeves with a much higher temperature resistance than rubber, offering a perfect fit with the opposing components for better airflow, and an unmatched appearance.
• All mounting fasteners in Tin coated titanium alloy, for reduced weight and un unbeatable appearance
• Your choice between 82mm or 92mm drive by wire throttle bodies, the latter offering 25% more surface for high displacement high performance applications

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611061870

The product you are viewing cross references to these numbers

Drive by wire throttle body intake system - Carbon Fibre. 
Throttle body diameter - 92mm 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects' complete Drive-by-Wire (DBW) intake system, designed specifically for 964 and 993 engines to be converted to DBW (drive by wire) throttle body.

Our system includes:

• 6 precision-engineered runners crafted from anodized structural aluminum
• 2 anodized fuel rails, also made from structural aluminum for durability and performance
• Dual GT3-style intake manifolds in carbon fiber for weight reduction and strength
• Intake T-tube in glass-reinforced thermoplastic, compatible with a 92mm DBW throttle body
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with a vacuum actuator
• 6 high-temperature silicone couplers for the manifold-to-runner connections
• 4 high-temperature silicone couplers for the manifold-to-T-tube/resonance flap connections
• TMAP sensor for accurate air intake measurements
• Vacuum reservoir for optimized engine performance
• All mounting hardware made from lightweight titanium alloy

Inlet port sizes: 42mm

Weighing just 5.5 kg (12 lbs), our intake system is nearly half the weight of the stock 964 intake, which weighs 11.5 kg (25.3 lbs), offering a substantial weight savings for enhanced performance

Why our system?

• 50% lighter than stock. Lighter than most systems given use of carbon fiber, thermoplastics, and titanium.
• Direct mount of fuel rail to the runner for perfect injector press fit.
• CNC machined PTFE inserts in between the cylinder head and the runner for a superior insulation from the heat from the cylinder heads, especially when in idle and street applications.
• Custom nitrile O-rings in between the runner and the cylinder head, and the intake T and throttle body for a perfect seal
• Silverlake’s precision-molded OEM+ silicone sleeves with a much higher temperature resistance than rubber, offering a perfect fit with the opposing components for better airflow, and an unmatched appearance.
• All mounting fasteners in Tin coated titanium alloy, for reduced weight and un unbeatable appearance
• Your choice between 82mm or 92mm drive by wire throttle bodies, the latter offering 25% more surface for high displacement high performance applications

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99311062704

The product you are viewing cross references to these numbers

Drive by wire throttle body intake system - Glass Reinforced Thermoplastic. 
Throttle body diameter - 92mm



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects' complete Drive-by-Wire (DBW) intake system, designed specifically for 964 and 993 engines to be converted to DBW (drive by wire) throttle body.

Our system includes:

• 6 precision-engineered runners crafted from anodized structural aluminum
• 2 anodized fuel rails, also made from structural aluminum for durability and performance
• Dual GT3-style intake manifolds in carbon fiber for weight reduction and strength
• Intake T-tube in glass-reinforced thermoplastic, compatible with a 92mm DBW throttle body
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with a vacuum actuator
• 6 high-temperature silicone couplers for the manifold-to-runner connections
• 4 high-temperature silicone couplers for the manifold-to-T-tube/resonance flap connections
• TMAP sensor for accurate air intake measurements
• Vacuum reservoir for optimized engine performance
• All mounting hardware made from lightweight titanium alloy

Inlet port sizes: 42mm

Weighing just 5.5 kg (12 lbs), our intake system is nearly half the weight of the stock 964 intake, which weighs 11.5 kg (25.3 lbs), offering a substantial weight savings for enhanced performance

Why our system?

• 50% lighter than stock. Lighter than most systems given use of carbon fiber, thermoplastics, and titanium.
• Direct mount of fuel rail to the runner for perfect injector press fit.
• CNC machined PTFE inserts in between the cylinder head and the runner for a superior insulation from the heat from the cylinder heads, especially when in idle and street applications.
• Custom nitrile O-rings in between the runner and the cylinder head, and the intake T and throttle body for a perfect seal
• Silverlake’s precision-molded OEM+ silicone sleeves with a much higher temperature resistance than rubber, offering a perfect fit with the opposing components for better airflow, and an unmatched appearance.
• All mounting fasteners in Tin coated titanium alloy, for reduced weight and un unbeatable appearance
• Your choice between 82mm or 92mm drive by wire throttle bodies, the latter offering 25% more surface for high displacement high performance applications

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611061870

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit for turbo retrofit with inlet manifold runners. 
Convert to Drive by Wire when retro fitting a turbocharger or supercharger

Fits:
Porsche 911 - 1974 - 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

911 used 2-Bolt type
964/993 uses 3-Bolt type

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine, now also for turbo or supercharged cars.

To be used when converting a G-Model 911 or a 964/993 engine to a turbocharged/supercharged engine with a 964 induction based Drive by Wire set-up

Conversion kit to a Porsche 964 based intake system to become a DBW (Drive by wire) intake based 74mm original Bosch throttle body (Sometimes referred to as 76mm) specifically executed all in CNC milled billet aluminum.

This is sold either with the intention to convert a Porsche 964/993 engine or to adapt and convert a 964 intake onto a G-model car when turbocharging (That sounds fun!).

Kit includes:

• Throttle body runner for 74mm throttle body in aluminum 
• Vacuum port on throttle body runner
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Connecting pipe out of aluminum replacing the resonance tube

Intake runners for the Porsche 911 G-model (2-bolt) or 964/993 (3-bolt) engine are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. 

The following parts are to be reused from your original 964 intake:
Rubber boots and clamps
The plenums (inlet manifolds)

Please Note:
Aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011003404

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit to GT3 manifolds
Convert the 964/993 induction to 996 GT3 Drive by Wire set-up

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:

Inlet conversion kit consists of the throttle body runner and the resonance tube. This is what you need to convert a Porsche 996 GT3 MK1 or MK2 plenum to fit on a Porsche 964 engine. This kit is solid and made from a modified PA12 material making the original Porsche parts feel old and flimsy in comparison. 

Components Include: 

• Throttle body runner made out of a modified PA12 material and an industrial 3d moulding process
• Seal and original Porsche 997 GT3 Bosch 82mm electronic throttle body
• Vacuum tube with original resonance flap internals. Note the internals come from refurbished original 996 parts.
• Vacuum solenoid and reservoir with mounts as per images
• Rubber boots and clamps
• Vacuum connections, check valve and extra hose
• Original Bosch MAP-T-sensor for 1 bar

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411012800

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit
Convert the 964/993 induction to Drive by Wire set-up

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:
Transform your Porsche 964's performance with this sleek and high-tech intake kit designed for Porsche 964/993. This innovation marks a transition from the typical accelerator cable-based throttle to an electronic "drive by wire" throttle body. This advanced change streamlines the intake system by eliminating unnecessary components, resulting in a cleaner engine bay appearance. 

This modification offers a more drivable setup for highly tuned engines while incorporating the precision of a drive by wire (DBW) throttle.

This enhanced drivability is a key feature for a tuned aircooled engine and allows for smooth idle control with a cold as well as a hot engine. It simply makes the engine feel more modern as compared to the old ITB (individual throttle bodies) setups lacking in mid range torque and difficulties with the idle control.

Precision-Engineered Components:

• 82mm Throttle Body with Reinforced Industrial PA12 Manifold
• CNC-Milled Intake Manifold Stacks Crafted from Billet Aluminium
• Included Rubber Boots and Clamps for Easy Installation
• Islandworks Resonance Tube with Valve and Solenoid, Manufactured from the Same PA12 Material
• Integrated Manifold Pressure and Temperature Sensors
• Essential Vacuum Lines for Optimal Performance

Kit Includes
Complete intake with all the parts seen in the image manufactured from modified PA12 using an industrial process. This intake plenum has been optimized to fit on a Porsche 964 or Porsche 993 and includes all vacuum ports for both brake vacuum and to maneuver the resonance flap.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090100

The product you are viewing cross references to these numbers

Fuel injection throttle body kit with air horns - Without fuel injectors



Fits:
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994

This is a direct replacement kit for converting your Porsche 964 engine to ITBs like the Porsche RSR using airhorns

Kit includes:
6 x Full billet, hard anodised ITB with a stainless steel lever assembly
6 x Thermo barrier gaskets
2 x Fuel rail with mounting hardware
1 x Throttle actuator hard anodised with 2 throttle connection rods manufactured out of stainless steel
1 x Throttle position sensor with mounting hardware
All the needed mounting hardware and fittings.  

ITBs in 2 different sizes:
- Tapered ITB: ∅42mm-∅41,5mm (∅42mm is the butterfly valve size, ∅41,5mm is the intake port diameter)
- Tapered ITB: ∅48mm-∅41,5mm (∅48mm is the butterfly valve size, ∅41,5mm is the intake port diameter) 

All parts of this kit are made out of a single piece 6082 aluminum and are anodized or hard anodized to make them more wear resistant. 

The mounting hardware and other parts are made out of stainless steel, the fuel rails out of 6060 aluminum extrusion profile and come with AN6 ORB connection for the fuel lines. 

The throttle linkages and all mounting hardware are made out of stainless steel and the pivoting points of the throttle linkage are made with ball and socket design for smooth operation. The throttle actuator has a bearing inside for a long lifespan. 

You are also able to use the OEM throttle connection cable but you will need to cut the rigid part at the end of the cable and mount a cable nipple for connecting the cable to the throttle actuator. All aluminum parts of the throttle actuator assembly are manufactured out of 6082 aluminum and are hard anodized.

The levers allow you to adjust and finetune mechanical movement of the ITBs

Fuel injectors, fuel lines, standalone ECU, wire harness are NOT included in the kit but work together 

Fuel injection throttle body kit with plenum adapters - Without fuel injectors



Fits:
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994

This is a direct replacement kit for converting your Porsche 964 engine to ITBs using plenum adapers (for a plenum chamber)

Kit includes:
6 x Full billet, hard anodised ITB with a stainless steel lever assembly
6 x Thermo barrier gaskets
2 x Fuel rail with mounting hardware
1 x Throttle actuator hard anodised with 2 throttle connection rods manufactured out of stainless steel
1 x Throttle position sensor with mounting hardware
All the needed mounting hardware and fittings.  

ITBs in 2 different sizes:
- Tapered ITB: ∅42mm-∅41,5mm (∅42mm is the butterfly valve size, ∅41,5mm is the intake port diameter)
- Tapered ITB: ∅48mm-∅41,5mm (∅48mm is the butterfly valve size, ∅41,5mm is the intake port diameter) 

All parts of this kit are made out of a single piece 6082 aluminum and are anodized or hard anodized to make them more wear resistant. 

The mounting hardware and other parts are made out of stainless steel, the fuel rails out of 6060 aluminum extrusion profile and come with AN6 ORB connection for the fuel lines. 

The throttle linkages and all mounting hardware are made out of stainless steel and the pivoting points of the throttle linkage are made with ball and socket design for smooth operation. The throttle actuator has a bearing inside for a long lifespan. 

You are also able to use the OEM throttle connection cable but you will need to cut the rigid part at the end of the cable and mount a cable nipple for connecting the cable to the throttle actuator. All aluminum parts of the throttle actuator assembly are manufactured out of 6082 aluminum and are hard anodized.

The levers allow you to adjust and finetune mechanical movement of the ITBs

Fuel injectors, fuel lines, standalone ECU, wire harness are NOT included in the kit but work together 

Fuel injection throttle body kit - Without fuel injectors



Fits:
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994

This is a direct replacement kit for converting your Porsche 964 engine to ITBs 

Kit includes:
6 x Full billet, hard anodised ITB with a stainless steel lever assembly
6 x Thermo barrier gaskets
2 x Fuel rail with mounting hardware
1 x Throttle actuator hard anodised with 2 throttle connection rods manufactured out of stainless steel
1 x Throttle position sensor with mounting hardware
All the needed mounting hardware and fittings.  

ITBs in 2 different sizes:
- Tapered ITB: ∅42mm-∅41,5mm (∅42mm is the butterfly valve size, ∅41,5mm is the intake port diameter)
- Tapered ITB: ∅48mm-∅41,5mm (∅48mm is the butterfly valve size, ∅41,5mm is the intake port diameter) 

All parts of this kit are made out of a single piece 6082 aluminum and are anodized or hard anodized to make them more wear resistant. 

The mounting hardware and other parts are made out of stainless steel, the fuel rails out of 6060 aluminum extrusion profile and come with AN6 ORB connection for the fuel lines. 

The throttle linkages and all mounting hardware are made out of stainless steel and the pivoting points of the throttle linkage are made with ball and socket design for smooth operation. The throttle actuator has a bearing inside for a long lifespan. 

You are also able to use the OEM throttle connection cable but you will need to cut the rigid part at the end of the cable and mount a cable nipple for connecting the cable to the throttle actuator. All aluminum parts of the throttle actuator assembly are manufactured out of 6082 aluminum and are hard anodized.

The levers allow you to adjust and finetune mechanical movement of the ITBs

Fuel injectors, fuel lines, standalone ECU, wire harness are NOT included in the kit but work together 

Intake manifold set GT3 style. 
Sold as a pair



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 - 1997 to 2005

Introducing the Silverlake Porsche 911 GT3-style intake manifolds, designed for both ITB (Individual Throttle Bodies) or DBW (Drive-By-Wire) applications. These manifolds are compatible with air-cooled and water-cooled Porsche engines, offering a lightweight and high-performance alternative to the OEM cast aluminum version.

Available in two advanced materials: temperature-cured carbon fiber prepreg or glass fiber-reinforced thermoplastic, each plenum weighs just 825 grams (1.8 lbs), significantly lighter than the 2400 grams (5.3 lbs) of the stock aluminum version. This results in a total weight reduction of 3.15 kg (7 lbs) per pair — a 65% savings compared to the original.

Engineered and flow bench tested to ensure optimal airflow volume, the carbon fiber version features a matte finish, while the thermoplastic model comes painted in black, with the option for custom repainting. Both versions are free of logos, providing a clean, personalized look.

The kit includes two manifolds/plenums, the high-temperature silicone couplers are available separately.

This product replaces Porsche part 99611061996

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611061996

The product you are viewing cross references to these numbers

Intake system for individual throttle bodies carbon fibre. 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects presents a complete intake system for air-cooled Porsche 964/993 engines equipped with ITBs (Individual Throttle Bodies), designed for maximum performance and efficiency.

The intake system includes:

• 2 x GT3-style intake manifolds in carbon fiber
• Glass-reinforced thermoplastic intake T-tube for air filter connection
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with vacuum actuator
• 6 x high-temperature silicone couplers for manifold-to-runner connections
• 4 x high-temperature silicone couplers for manifold-to-T/resonance flap connections
• TMAP sensor for accurate manifold pressure readings
• All mounting fasteners in lightweight titanium alloy
• Vacuum reservoir for optimal pressure management

Weighing just 4.5 kg (9.9 lbs), this system is significantly lighter than the stock 964 intake, which weighs 11.5 kg (25.3 lbs).

Why choose our system?

• 50% lighter than stock: A combination of carbon fiber, thermoplastics, and titanium results in a remarkably light system.
• Fuel rail precision mounting: Direct mounting to the runner ensures perfect injector press fit.
• Superior heat insulation: CNC-machined PTFE inserts between the cylinder head and runner offer exceptional heat protection, especially in idle or street driving conditions.
• Perfect sealing: Custom nitrile O-rings between the runner and cylinder head, as well as the intake T and throttle body, guarantee a secure, leak-free fit.
• Premium silicone sleeves: Silverlake’s precision-molded OEM+ silicone sleeves provide superior temperature resistance and ensure a flawless fit with all components, delivering better airflow and an unmatched look.
• Titanium fasteners: Tin-coated titanium alloy hardware not only reduces weight but also enhances the system’s aesthetic appeal.

This intake system is built for those seeking the ultimate performance, weight savings, and durability for their Porsche 964/993 engine.

Intake system for individual throttle bodies glass reinforced thermoplastic. 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Silverlake Projects presents a complete intake system for air-cooled Porsche 964/993 engines equipped with ITBs (Individual Throttle Bodies), designed for maximum performance and efficiency.

The intake system includes:

• 2 x GT3-style intake manifolds in glass-reinforced thermoplastic
• Glass-reinforced thermoplastic intake T-tube for air filter connection
• Resonance flap or resonance flap delete tube in glass-reinforced thermoplastic, complete with vacuum actuator
• 6 x high-temperature silicone couplers for manifold-to-runner connections
• 4 x high-temperature silicone couplers for manifold-to-T/resonance flap connections
• TMAP sensor for accurate manifold pressure readings
• All mounting fasteners in lightweight titanium alloy
• Vacuum reservoir for optimal pressure management

Weighing just 4.5 kg (9.9 lbs), this system is significantly lighter than the stock 964 intake, which weighs 11.5 kg (25.3 lbs).

Why choose our system?

• 50% lighter than stock: A combination of carbon fiber, thermoplastics, and titanium results in a remarkably light system.
• Fuel rail precision mounting: Direct mounting to the runner ensures perfect injector press fit.
• Superior heat insulation: CNC-machined PTFE inserts between the cylinder head and runner offer exceptional heat protection, especially in idle or street driving conditions.
• Perfect sealing: Custom nitrile O-rings between the runner and cylinder head, as well as the intake T and throttle body, guarantee a secure, leak-free fit.
• Premium silicone sleeves: Silverlake’s precision-molded OEM+ silicone sleeves provide superior temperature resistance and ensure a flawless fit with all components, delivering better airflow and an unmatched look.
• Titanium fasteners: Tin-coated titanium alloy hardware not only reduces weight but also enhances the system’s aesthetic appeal.

This intake system is built for those seeking the ultimate performance, weight savings, and durability for their Porsche 964/993 engine.

Microswitch for Throttle Body Flap.



Fits
Porsche 964 C2 / C4 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 21.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160601903

The product you are viewing cross references to these numbers

Throttle housing linkage rod. 

Fits:
Models With Automatic Speed Control (PR 454)
Porsche 964 Carrera 1989-94

Diagram ref. 39.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411064901

The product you are viewing cross references to these numbers