Bilstein standard

Bilstein Sports B6 (SET OF 2) REAR shock absorber.



Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 06/1991-09/1993
Porsche 965 3.3L Turbo / 3.3L Turbo S / 3.6L Turbo 08/1990-09/1993

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-015479KIT

The product you are viewing cross references to these numbers

Bilstein Sports B6 FRONT and REAR shock absorbers PACKAGE Porsche 964 Early Cars

 

SET OF 4 for FRONT & REAR
1 X 35-052777
1 X 35-052784
2 X 24-017350

Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 12/1988-12/1990

- Upgrade for standard suspension
- Replacement for sports suspension.

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN964B61

The product you are viewing cross references to these numbers

Bilstein Sports B6 FRONT and REAR shock absorbers PACKAGE Porsche 964 Late Cars



SET OF 4 for FRONT & REAR
1 X 35-052777
1 X 35-052784
2 X 24-015479

Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 06/1991-09/1993
Porsche 965 3.3L Turbo / 3.3L Turbo S / 3.6L Turbo 08/1990-09/1993

- Upgrade for standard suspension
- Replacement for sports suspension.

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN964B62

The product you are viewing cross references to these numbers

Bilstein Sports B6 REAR shock absorber. SET OF 2



Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 12/1988-12/1990

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-017350KIT

The product you are viewing cross references to these numbers

Shock absorber rear strut and mounting kit for Porsche 964 (911) models from 1991 onwards, combining Bilstein rear dampers with  OE Match matching mounts and hardware for the rear suspension.

Kit contents
2 x Rear shock absorber strut mounting 96433305900
2 x Rear shock absorber Bilstein 24-015479
2 x Hexagon nut 99908462101
6 x Shock absorber washer 96433310700
2 x Rear shock absorber bump stop 96433310500
2 x Rear shock absorber dust cover 96433310600
2 x Washer 91133351100
2 x Rear shock absorber threaded sleeve 96433351100

What This Product Does
This kit groups the main rear shock absorber components for the Porsche 964 so the damper, mount and associated hardware work together as intended. The upper mounts and sleeves provide the interface between the Bilstein damper and the body while bump stops and dust covers help protect the damper shaft and manage suspension travel.

Functions
• Supports and locates the rear shock absorber at the chassis mounting points
• Helps maintain correct rear suspension alignment and geometry
• Provides mounting hardware matched to the damper and mount components
• Helps limit harsh bottoming through bump stops
• Shields the damper rod from dirt and debris using dust covers

Symptoms of Fault
• Knocking or clunking noises from the rear over bumps
• Rattles linked to loose or perished rear mounting hardware
• Unsettled or inconsistent feel from the rear suspension
• Visible cracking or deterioration of rear top mounts, bump stops or dust boots
• Signs of accelerated wear on rear dampers due to poor support or contamination

Why Replacement Matters
On Porsche 964 models the rear struts, mounts and related hardware are subject to continuous load, movement and exposure to the elements. Over time, rubber parts can harden or split and metal components can corrode or wear, leading to noise, reduced damping control and less precise geometry. Replacing mounts, bump stops, dust covers and hardware alongside new rear dampers is a common approach on these cars, helping to avoid reusing tired parts and reducing the likelihood of repeat labour if noises or play remain after damper replacement.

Fits
• Porsche 964 (911) (1989–1994)
• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• Porsche 964 (911) Turbo 3.3L 1991–93
• Porsche 964 (911) Turbo 3.6L 1991–93

FAQs
• Q: Should rear strut mounts and hardware be renewed with new rear dampers?
  A: They are commonly replaced at the same time, especially if original or showing wear, to avoid reusing aged mounts and fixings.
• Q: Could rear knocking come from components other than the shock absorber itself?
  A: Yes, rear top mounts, drop links and suspension bushes are frequent sources of knocks and should be checked together.
• Q: Any practical tip when using a complete kit like this?
  A: Compare the kit components with the Porsche parts diagram and your existing hardware before starting work so you understand what is included and what may still be required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-015479KIT.1

The product you are viewing cross references to these numbers

Bilstein Shock absorbers rear strut and mounting kit for the rear of Porsche 964 models from 12/1988 to 12/1990 mounting parts by OE Match, covering 964 (911) Carrera 2 and Carrera 4 applications and allowing multiple rear suspension components to be renewed together for consistent fit and behaviour.

What This Product Does Provides the key rear damper and strut mounting components so the rear shock absorbers are correctly located on the Porsche 964 chassis. It supports proper damper alignment, helps manage noise and vibration from the rear suspension, and reduces the likelihood of premature wear caused by tired mounts, bump stops or hardware. 

Kit Includes
2 x Shock absorber strut mounting (96433306404)
2 x Rear shock absorber (24-017350) Bilstein
2 x Hexagon nut (99908462101)
4 x Thrust ring (96433351701)
2 x Shock absorber top mount rubber insert (96433306903)
2 x Shock absorber bump stop (92833351810)
2 x Shock absorber dust cover (96433350201)
2 x Washer (91133351100)
2 x Shock absorber supporting cover (92833355100)

Functions

• Mounts the rear shock absorber securely to the body and suspension
• Helps control damper movement and impact loads through the rear axle
• Supports correct operation of the rear suspension geometry
• Assists in reducing knocks, rattles and harsh impacts from the rear damper area
• Provides matched mounts, bump stops, covers and hardware for the rear shocks

Symptoms of Fault

• Knocking or rattling noises from the rear suspension area
• Harsh or sharp impacts over bumps where bump stops or mounts have deteriorated
• Unsettled, vague or unstable feel from the rear of the vehicle
• Visible cracking, perishing or distortion in rear shock mounts, inserts or hardware
• Signs of premature rear damper wear or movement at the mounting points

Why Replacement Matters Rear damper mounting parts on the 964 are often refreshed at the same time as new rear shock absorbers to avoid reusing aged top mounts, bushes or hardware that can undermine damping control. An OE Match kit allows several related rear suspension parts to be replaced together so components are compatible with each other and with the intended Porsche specification. This approach can help maintain consistent rear axle behaviour on both Carrera 2 and Carrera 4 models as they age, while reducing the chance that worn supporting parts cause noise or accelerated wear on new dampers.

Fits

• Porsche 964 (911) (1989–1994)
• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• 
  

FAQs

• Q: Is this type of kit vehicle-specific?
  A: Kits of this kind are usually specified for particular Porsche models and production years, so confirm coverage for your 964 (including model year and Carrera 2/Carrera 4 variant) before use.
• Q: Does a kit like this normally include all one-time-use hardware?
  A: Not in every case. Use the listed or supplied contents to verify whether additional bolts, clips or other hardware need to be sourced separately.
• Q: Any installation tip for suspension kits on a 964?
  A: Compare the kit contents against the relevant Porsche PET diagram and your planned work so you know exactly which mounts and fixings are included and what else you may wish to renew while access is available.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-017350KIT.1

The product you are viewing cross references to these numbers