Alloy/ Silver Interior

Alloy Heater Knob covers

Set of 2



Fits:
Porsche 964 1989-93
Porsche 993 1994-97
Porsche 968 1992-95
Porsche 944 1985-91

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680HC993

The product you are viewing cross references to these numbers

Alloy Switch covers
Set of 5



- headlight*
- front fog lights
- rear fog lights
- cigar lighter
- rear window heating

* Fits only original shape 964 headlight knob.
Please note that if you had it replaced with newer version (993 type) you will need to buy cover set for 993.

Fits:
Porsche 964 1989-93

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680SC964

The product you are viewing cross references to these numbers

CD Holder Aluminium



Designed to replace your redundant cassette box, holder 4 disc's. Simple to fit for all models.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680CH993

The product you are viewing cross references to these numbers

Drinks Holder Aluminium.



Designed to replace your redundant cassette box, use it for cans, cups, sunglasses, mobile phone etc. Simple to fit for all models.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680DH965

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with classic radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit with classic radio and heater control cut-outs

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552479

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with without heater/AC and radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit without heater control and radio cut-out slot

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552482

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with without radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit with heater control cut-out and without radio slot

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552481

The product you are viewing cross references to these numbers

Dash Trim Kit Singer Style With DIN Radio Slot - LHD (Left Hand Drive)

Fits:
Porsche 964 1989>>1994

"Singer Style" backdate dash trim conversion kit with DIN radio and heater control cut-outs

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Diagram Ref No 30, 31, 32 And 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552480

The product you are viewing cross references to these numbers

Alloy Door Handles - PAIR -



Replace the plastic cheap looking black door handles with our new alloy door handles, easy to fit and easy to keep clean.

Fits:
Porsche 911 1974-89
Porsche 964 1990-94
Porsche 993 1994-97

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680DH900

The product you are viewing cross references to these numbers

Alloy finished door locking knob with surround.
Fits:
Porsche 911 1986-89
Porsche 964 1990-94
Porsche 928 1978-95

Price is for each.

Alloy finished door locking knob with surround.



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 928 1978-95

Price is for each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680DK964

The product you are viewing cross references to these numbers

Footrest Alloy for LHD Cars



Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680AP964L

The product you are viewing cross references to these numbers

Footrest Alloy for RHD Cars



Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680AP964

The product you are viewing cross references to these numbers

Gauge Bezels Aluminium
These bezels slip over the existing black factory bezels
Set of 5 aluminium rings.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680AB911

The product you are viewing cross references to these numbers

Gauge Bezels Aluminium
These bezels slip over the existing black factory bezels,  requires some additional glue/adhesive which is not included 
Set of 5 aluminium rings. 



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Gear Knob Insert Alloy Engraved.



Fits:
Porsche 964 Carrera    5 Speed cars

Porsche 911 87-89 G50 Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911680GI964

The product you are viewing cross references to these numbers