Driveshafts & Parts

Bellow Clamp For CV Boot, 34MM.
The Porsche Bellow Clamp for CV Boot is a genuine OEM clamp designed to secure the constant velocity (CV) joint boot in place. This heavy-duty band keeps the rubber boot tightly sealed to the driveshaft and flange, ensuring that vital CV joint grease stays inside while dirt, water, and debris stay out.
Sold Each.

Fits:

• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 928 4.5L 1978-82
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GTS 5.4L 1992-95
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988>>
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster S 986 3.2L 2003-04
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 997 TURBO 2007-09
• Porsche 997 GT2 2007-09

What This Product Does:

The clamp fastens the rubber or neoprene CV boot onto the shaft and/or housing flange, sealing it in place so the boot remains tight and doesn’t slip.
It helps keep grease inside the CV joint (lubricating the joint) and prevents dirt, water, debris from penetrating the boot and damaging the joint.
Ensures the boot stays under the correct tension so it doesn’t collapse or leak under motion or load.

Symptoms / Signs Of Failure:

• Grease leaking out of the CV boot, leading to a messy axle or splattered grease near the joint.
  
• CV boot collapse or deformation — when not secured, the boot may shift or fold.
  
• Ingress of dirt, water or debris into the CV joint, leading to accelerated wear, pitting, or noise.
  
• Clicking, popping, or humming noises under load or while turning, caused by a failing CV joint.
  
• Loose or slipping boot edges, or visible gaps between the boot and flange.

Why Replacement Matters:

• Protects the CV joint’s longevity — by keeping grease in and contaminants out, the joint lasts far longer.
  
• Prevents costly drivetrain repairs — a damaged CV joint is expensive; a failed boot clamp is cheap.
  
• Maintains proper boot tension and seal so the boot doesn’t move, stretch, or fail prematurely.
  
• Ensures consistent, quiet performance — a well-sealed boot helps avoid noise from a damaged joint.
  
  

Diagram Ref No 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833225701

The product you are viewing cross references to these numbers

Driveshaft bolt.



Fits:
Porsche 914 1970-76  (16pcs Required)
Porsche 924 1976-79  (12pcs Required)

Porsche 924 1979-88  (24pcs Required)
Porsche 944 1982-91  (24pcs Required)
Porsche 968 1992-95  (24pcs Required)

Price is for each bolt.
Covers Part Numbers 893407237, N91108201,

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

893407237

The product you are viewing cross references to these numbers

Driveshaft Porsche 924S / 944 / 944S2 / 944 Turbo all manual cars



New production

Fits:
Porsche 944 S2 1989-91 Manual cars
Porsche 944 Turbo 1985-91 Manual cars


Length: 540 mm,
Outer teething wheel side: 100,
Inner Diameter: 100 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95133203806

The product you are viewing cross references to these numbers

Fits:
Porsche 944 S2 1989-91 Manual cars
Porsche 944 Turbo 1985-91 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned


Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95133203806

The product you are viewing cross references to these numbers

Rear wheel hub castle nut. M 22 x 1,5

Sold each - 2 required per car

Fits:
Porsche 911 3.2 Carrera 1984 to 1989
Porsche 944 1986>>
Porsche 994 S2
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 986 1992-95

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90091009302

The product you are viewing cross references to these numbers