Pedals / Floor Boards / Track Mats LHD Cars

Rennline Gas Pedal Rubber Grip
LHD Cars



Fits:
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 986 / 987 Boxster
Porsche 987C Cayman
Porsche 991
Porsche Panamera

Porsche 718 Cayman

Porsche 718 Boxster

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P71

The product you are viewing cross references to these numbers

Rennline Gas Pedal Perforated.
LHD Cars



Fits:
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 986 / 987 Boxster
Porsche 987C Cayman
Porsche 991
Porsche Panamera

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P45

The product you are viewing cross references to these numbers

Rennline REV2 3 Piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 944 / 924 / 968 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline REV2 3 Piece Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 944 / 924 / 968 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline REV2 4 Piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 944 / 924 / 968 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline REV2 4 Piece Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 944 / 924 / 968 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline REV2 Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 944 / 924 / 968

This new Rennline pedal can be adjusted in any direction, not only for height and depth, but also laterally and angularly. You'll never again have to struggle to heel-and-toe or have your shoe catch the edge of the brake pedal as you transition from the gas.

•   All billet aluminum and 300 series stainless steel construction
•   Spring loaded hinge for quick throttle return with long life bushings
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Completely replaces factory pedal
•   Steel spherical rod end and throttle linkage shaft that utilizes OEM linkage and allows adjustment for quicker ratio throttle angle
•   1.25" of height and 1" of side to side adjustment
•   Removable and adjustable throttle extensions
•   Built in adjustable throttle stop
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired

Note: Pictures may not show actual product.

Rennline REV3 2PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 986 Boxster Tiptronic cars
Porsche 996 Tiptronic cars

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 2PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Tiptronic
Porsche 996 Tiptronic

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 3PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 3PC Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 986 Boxster Tiptronic cars
Porsche 996 Tiptronic cars

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 4PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 4PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 Fully Adjustable Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 986 Boxster
Porsche 996

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline Throttle Extension - Heel/Toe for LHD Cars



These throttle extensions are designed to work with Rennline gas pedals (# P70, P71, & P73).

All throttle extension kits now come with both heel and toe extensions that can be used individually or together. Throttle pedal cover is not included with this kit.

Depending on your driving style, this throttle extension kit can be used as a heel, toe, or heel/toe configuration. It's easy to install and can be added to most Rennline gas pedals. Available in red, silver, or black.


Note: Pictures may not show actual product.

If you have any questions as to whether or not this will work with your pedal, please contact us.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PE7071HT

The product you are viewing cross references to these numbers