Torsion Bar
Filter by brand
90134371301/1
Product Information
Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Diagram ref no 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134371301
The product you are viewing cross references to these numbers
Product Information
Front axle stabiliser lever.Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Diagram ref no 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134371301
90134371301
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
€88.50 inc. VAT
Now €77.88 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
1S166911F
Product Information
- 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1S166911F
The product you are viewing cross references to these numbers
Product Information
Chrome Moly Light Weight Hollow Front Torsion Bar (SET OF 2) - 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1S166911F
1S166911F21
1S166911F22
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Please select the size
Prices from: €488.52 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
209202
Product Information
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
209202
The product you are viewing cross references to these numbers
Product Information
QuickChange™ Torsion Bars, FRONTSold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
209202
2061003
90134310112
90134310114
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Select Below
Prices from: €631.30 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
21021
Product Information
Sold per kit, 1 kit req'd per car.
Fits:
for G50 Transmission
Porsche 911 / 930 1987-89
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21021
The product you are viewing cross references to these numbers
Product Information
QuickChange™ Torsion Bars, REARSold per kit, 1 kit req'd per car.
Fits:
for G50 Transmission
Porsche 911 / 930 1987-89
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21021
2102126
2102127
2102128
2102129
2102130
2102131
2102132
2102133
2102134
2102136
2102138
91133311500
91133311502
91133311600
91133311602
93033311501
93033311502
93033311601
93033311602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Select Below
Prices from: €610.65 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
21020
Product Information
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21020
The product you are viewing cross references to these numbers
Product Information
QuickChange™ Torsion Bars, REARSold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21020
2102026
2102027
2102028
2102029
2102030
2102031
2102032
2102033
2102034
2102036
2102038
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Select Below
Prices from: €561.68 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
90134379201
Product Information
Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram - Ref No 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
The product you are viewing cross references to these numbers
Product Information
Torsion Bar Rubber Mount Front. Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram - Ref No 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
1640600500
90134379201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 914 (1970-1976)
Price: €17.42 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90134379201/1
Product Information
Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram.
Diagram ref no 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
The product you are viewing cross references to these numbers
Product Information
Torsion bar rubber mount, Front. Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram.
Diagram ref no 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
90134379201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 914 (1970-1976)
€10.56 inc. VAT
Now €9.29 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90134379202
Product Information
Sold each, (need 2 per car).
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379202
The product you are viewing cross references to these numbers
Product Information
Torsion bar rubber mount Front.Sold each, (need 2 per car).
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379202
90134379202
1640600100
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Price: €21.55 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90134379202/1
Product Information
Sold each, (need 2 per car).
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Diagram Ref No 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379202
The product you are viewing cross references to these numbers
Product Information
Torsion bar rubber mount Front. Sold each, (need 2 per car).
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Diagram Ref No 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379202
90134379202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
€8.20 inc. VAT
Now €7.22 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
You may also like
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Ball Joints
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Shock Absorber Parts REAR
-
Coil Springs REAR
-
Track Control Arms FRONT
-
Wheel Bearings & Kits
-
Hub Nut
-
Wishbones & bushes
-
Spring Plate
-
Cross Member & Parts
-
Wheel Hub / Carrier
-
SuperPro Polyurethane Bushes
-
Powerflex Heritage Collection
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Popular Models
