Shock Absorber Parts FRONT

O-ring wheel bearing spacer ring - 25,3 x 2,4
Sold each - 2 required per car



Fits:
Porsche 911 - 1965 to 1989
Porsche 914 - 1970 to 1976

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970108450

The product you are viewing cross references to these numbers

QuickChange™ Camber Plates. Sold per kit, 1 kit req'd per car.
Replacement for 91134101800.

Fits:
Porsche 911/912/930/914 1966-89
* see note for fitment

Make Quick Camber Changes, Independent of Caster.
A bolt-in camber plate that allows easy camber adjustment, independent of caster. Indices allow adjustment without a camber gauge. Change camber track-side based on tire temp information, or switch between street and track settings easily.

✓ +/- 1.25 degrees added range
✓ Adjust camber independent of caster
✓ Make track-side camber changes
✓ Adjust without a gauge
✓ Completely bolt on

QuickChange for camber flexibility.
Loosening the large center nut allows camber to be changed quickly. Built-in indices allow accurate positioning without using a camber gauge. The included safety snap ring prevents the nut from coming off in the event it is not properly torqued.

You can easily maintain separate street and track camber settings, or quickly make track-side adjustments based on tire temperature.

The included monoball is oversized for long life and provides free, non-binding movement while precisely positioning the strut top.

Works great with torsion bar and coilover equipped cars.

Koni and Boge inserts will require the Koni/Boge adaptor kit sold seperately. Von and Bilstein inserts do not require the adaptor kit.

Please note:
• QuickChange Camber Plates can be fit to '66-'89 911/912/930 and 914 cars. May be used with Von, Bilstein, Koni, Boge, and other brand inserts.
• Koni and Boge strut inserts must use the Koni/Boge insert adaptor, available separately – Elephant Racing part number 2152203 (may also work with other brands).
• Von and Bilstein inserts must NOT USE the Koni/Boge insert adaptor. No adaptor is used with Von and Bilstein inserts.
• QuickChange Camber Plates may be used with coil over conversions. To use with coil over kits with Von or Bilstein inserts, you must use Elephant Racing Extended Length Upper Spring Perches for QuickChange camber plate part number 2280902. To use with coil over kits with other brands of inserts, use Elephant Racing Extended Length Upper Spring Perches part number 2280904.
• DO NOT install the strut-top dust covers (metal "cans" at the top of the strut). You may optionally install rubber bellows to provide dust protection, available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2152200

The product you are viewing cross references to these numbers

Rennline sealed monoball top mount set Front.


Porsche 911/912/930 All 1966-89 Front

Looking for the ultimate in steering feedback and front end precision from your 911? Look no further than this Rennline Monoball mount kit. 100% manufactured and assembled in house, these monoball kits feature a spherical bearing pressed into our machined top mount to completely replace the factory assembly and correct the flaws inherent in its design. By eliminating rubber bushings, these mounts will precisely maintain alignment settings and geometry under heavy loads created by spirited street driving and track time while providing more crisp and precise steering feel and feedback at the same time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

MB11

The product you are viewing cross references to these numbers

Rubber stop for front shock absorber.

 


Fits:
Porsche 911 1965-70 (Excluding 911E)
Porsche 911 1971-83 (Excluding Turbo)
Porsche 911 1984-89 Turbo-Look & Super Sport only
Porsche 914

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134330100

The product you are viewing cross references to these numbers

Rubber stop for front shock absorber.



Fits:
Porsche 911 1965-70 (Excluding 911E)
Porsche 911 1971-83 (Excluding Turbo)
Porsche 911 1984-89 Turbo-Look & Super Sport only
Porsche 914

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134330100

The product you are viewing cross references to these numbers

Rubber strut mount repair kit. (old version). One kit does 2 shock struts.
Complete set to repair front strut bearing - incl. rubber bearings, support washers, bushings, lock plates and nuts,



Fits:
Porsche 911 / 912 1965-1968

Click 'Zoom in' for large parts diagram.
Diagram ref no 3, 4, 5, 6  and 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134169503

The product you are viewing cross references to these numbers

Steering Arm Lever Bolt (Long) M10x28.



Fits:
Porsche 911 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90007504203

The product you are viewing cross references to these numbers

Steering Arm Lever Bolt (Short) M10x22.

Fits:
Porsche 911 1965>>1968

Diagram Ref No 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0102537

The product you are viewing cross references to these numbers

Steering Arm Lever Bolt Sleeve Guide.



Fits:
Porsche 911 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90019707001

The product you are viewing cross references to these numbers

Steering arm lever bolt tab washer.



Fits:
Porsche 911 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134748101

The product you are viewing cross references to these numbers

Steering arm lever bolt tab washer. Sold each.



Fits:
Porsche 911 2.0 01/63-07/68
Porsche 912 1.6 01/65-07/68

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134748101

The product you are viewing cross references to these numbers

Strut shortening wiper seals. 1 pair, req'd per car.



Fits:
Porsche 911 / 912 / 930
1969-1989 Late Bilstein Struts Only With Green Seal Holders

Replace Your Worn Out Wiper Seals

Lowering your car reduces the travel range of the shocks/struts. Shocks with limited range of travel have a tendency to bottom out more often while driven hard or under poor road conditions. This translates to ride harshness and eventual damage to shocks/struts and shock mounts.

These wiper seals shorten struts by 3/4 inch and add much needed travel. Have us install the shortening wipers along with other strut modification services. Shock body shortening services are also available.

Note: Only for later style Bilstein struts with green seal holders, as pictured above. Earlier style struts with zinc coated 5/8″ holders require further strut modifications. Please call for more information.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2280905

The product you are viewing cross references to these numbers

Strut top camber plate bushings.
1 kit required per car



Fits:
Porsche 911 1965 - 1970
Porsche 911 1971 - 1989
Porsche 912
Porsche 914

Factory Ride & Performance

Available for early style camber plates 1965-1970 and late style 1971-1989.

Easily Installed – Install with the camber plates still in the car using ordinary hand tools.

Restore Ride and Performance – Rubber is the choice if you want to restore factory ride and performance.

Rubber Re-bush
A true rubber replacement bushing for the factory strut top camber plates.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22900

The product you are viewing cross references to these numbers

Top mount support washer.



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134162900

The product you are viewing cross references to these numbers

Top mount support washer.

Fits:
Porsche 911 1965-89

Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134162900

The product you are viewing cross references to these numbers