Anti Roll Bar

Rear swaybar mount kit.



Fits:
Porsche 911/912/930 1965-89

Stock 911 rear swaybar mounts have a nasty habit of tearing away from the body. Stiff sway bars and aggressive driving only accelerate the inevitable mount failure.
Replace your mounts with these super strong aftermarket mounts and solve the problem for good. Requires grinding off the factory mounts and welding for installation.

The mounts have two sets of screw holes to fit both the 66mm bolt spacing as equipped on the 1978 to 1989 cars as well as the 56mm bolt spacing as equipped on the 1965 to 1977 cars.

• Fully machined surfaces for a precision fit
• Consistent material thickness for easy installation
• Tighter tolerances, more surface area, and stronger than any other rear swaybar mounts available.

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150198300

The product you are viewing cross references to these numbers

Stabiliser / torsion bar mounting plate.

Fits:
Porsche 911/911 S / 912 1965-67
Porsche 911 S/L / 912 1968-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 911 (930) Turbo 1795-77
Porsche 914 1970-76

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134375401

The product you are viewing cross references to these numbers

Stabiliser / torsion bar mounting plate.

Fits:
Porsche 911/911 S / 912 1965-67
Porsche 911 S/L / 912 1968-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 911 (930) Turbo 1795-77
Porsche 914 1970-76

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134375401

The product you are viewing cross references to these numbers

Sway bar backdate mounting kit
1 kit required per car



Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025_2270024

The product you are viewing cross references to these numbers

Sway bar mounting backer plate kit
1 kit required per car



Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270024

The product you are viewing cross references to these numbers

Thru-body front swaybar reinforcement kit.
Sold per pair, 1 pair req'd per car.

Fits:
Porsche 911/912/930 1965-89

Prevent or repair common failure point.
Elephant Racing Swaybar Mount Reinforcement Panels will help prevent or repair the common problem of cracked swaybar mounts resulting from the application of overly stiff, binding, or incorrectly adjusted aftermarket swaybars.

Elephant Racing Swaybar Mount Reinforcement Panels are precision laser-cut from18 gauge steel. They distribute the swaybar loads into the bulkhead and double-layer sheet metal just beyond the original single-layer hole location.

You may also be interested in an upgrade to Elephant Racing's QuickChange Blade Style Swaybar which mounts to the chassis using spherical bushings that articulate or "float" ensuring no binding. Spherical bushings allow mounts to automatically re-align themselves when the chassis is flexing under load. We believe this binding plays a significant role in the mount's failure.

Installation requires welding

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270026

The product you are viewing cross references to these numbers

U-tab kit.



Fits:
Porsche 911 / 912 / 930 1969-89
Porsche 914 1970-76

Required when installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Thru-Body Swaybar Conversions
• Not required for Elephant Racing Blade Type Swaybars
• Welding required for proper installation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025

The product you are viewing cross references to these numbers