Oil Radiators / Heat Exchangers
Filter by brand
OILCOOLERKIT03
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 11, 11A, 12, 12A, 13, 14, 14A, 15, 16, 17, 19, 20, 21, 22, 23, 25, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45 and 46.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT03
The product you are viewing cross references to these numbers
Product Information
Radiator oil cooler kit.Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 11, 11A, 12, 12A, 13, 14, 14A, 15, 16, 17, 19, 20, 21, 22, 23, 25, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45 and 46.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT03
93020704602
93020711305
93020704503
93020711106
93020705304
93011019400
93020723902
90015100802
90091002202
91120730200
91120730300
91155914500
91155914501
90015100703
90018703202
99951108402
90037803001
93020736100
99992000501
99959142940
93020735300
93020731915
93020712100
90002500703
93020792700
93020792100
99951116202
93020726501
93060611800
90012300730
91162412101
PCG62410400
99945000602
99950722902
90007536302
99965238100
N0120064
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Brass Long return oil pipes. Porsche 911 1974-89 (93020704603/1
1 x Oil tube to front cooler. Porsche 911 1980-89 (93020711306/1
1 x Brass long intake oil pipe. Porsche 911 1974-86 (93020704503/1
1 x Oil tube to front cooler. Porsche 911 1974-89 (93020711107/1
1 x Radiator oil cooler, Front. Porsche 911 1980-89 (93020705304/2
3 x Radiator oil cooler rubber mount. Porsche 911 1978-89 (99970326300/1
3 x Radiator oil cooler rubber buffer. Porsche 911 1984-89 (93020723902/1
6 x Washer B 8,4 (90015100802
6 x Radiator Oil Cooler Rubber Mount Lock nut. Porsche 911 1980>> (PCG91002202
6 x Oil tube mount hose. Porsche 911 1972-89 (91120730200
4 x Locking nut B6 (N0120064
4 x Long Oil Pipe Support. Porsche 911 1969-89 (91120730300
3 x Spacer sleeve 11.8 mm for Porsche 911 84-89 (91155914500
3 x Spacer sleeve 5 mm for Porsche 911 84-89 (91155914501
3 x Heatshield Locking Bolt washer. Porsche Boxster 986 (90015100703
3 x Tapping Screw BZ 6,3 x 32 (90018703203
1 x Oil Pipe Support Clamp. Porsche 911 1972-89 (99951108402
3 x M6 x 20 Hex. Head Bolt for Multiple Applications (90037803001/1
1 x Radiator Oil Cooler Top Gasket. Porsche 911 1984-89 (93020736100
5 x U-clamp for oil cooler cover plate. Porsche 911 84-89 (99992000501
2 x Plastic Expansion Rivet for oil cooler cover plate. Porsche 911 84-89 (99959142940
1 x Radiator Oil Cooler Rubber Gasket. Porsche 911 1984-89 (93020735300
1 x Radiator Oil Cooler Cover Plate FRONT. Porsche 911 1984-89 (93020731915
1 x Radiator oil cooler bottom plate. Porsche 911 1984-89 (93020712100
4 x Front bumper washer. Porsche 911 1984-89 (90002500703
1 x Front Oil Cooler Support Bracket. Porsche 911 84-89 (93020792700
1 x Upper Mounting Bracket. Porsche 911 84-89 (93020792100
1 x Oil pipe clamp. Porsche 911 / 964 / 993 (99951116202
1 x Oil Cooler Pipe Rubber Mount. Porsche 911 1984-89 (93020726501
1 x Oil pressure switch. Porsche 911 / 944 (93060611800/1
1 x Tiptronic Gearbox Oil Pan Drain Plug Seal Ring. Porsche 964 / 993 (90012300730
1 x Auxiliary Fan for Front Oil Cooler. Porsche 911 1984-89 (91162412101
2 x Bracket for Front Oil Cooler Auxiliary Fan. Porsche 911 1984-89 (PCG62410400
4 x Tapping screw B 4,2 x 13 (99945000602
4 x Speed Nut 99950722902 (99950722902
4 x Bolt with washer M 6 x 10 (90007536302
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €2,398.03 inc. VAT
Due In 30+ Days
OILCOOLERKIT05
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT05
The product you are viewing cross references to these numbers
Product Information
Radiator oil cooler kit. Porsche 911 SC & 3.2L 1974 -89
Fits:
Porsche 911 1974 -89
Click 'Zoom in' for large parts diagram.
Diagram ref no 11A, 12A, 13A, 13B,
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT05
99970326300
93020711107
93020711306
93020705304
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
3 x Radiator oil cooler rubber mount. Porsche 911 1978-89 (99970326300/1
1 x Oil tube to front cooler. Porsche 911 1974-89 (93020711107/1
1 x Oil tube to front cooler. Porsche 911 1980-89 (93020711306/1
1 x Radiator oil cooler, Front. Porsche 911 1980-89 (93020705304/2
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €486.66 inc. VAT
In Stock - 24 Hour Dispatch
OILCOOLERKIT01
Product Information
Fits:
Porsche 911 SC 1980-83
Porsche 911 3.2L 1984-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT01
The product you are viewing cross references to these numbers
Product Information
Radiator oil cooler kit.Fits:
Porsche 911 SC 1980-83
Porsche 911 3.2L 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 11, 11A, 12, 12A, 13A, 13B, 13C, 13D, 18, 20, 21, 22, 23, 25, 26 and 27.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT01
93020705304
99970326300
90002500703
90037803001
91120730200
91120730300
90015100703
90018703202
99951108402
99951108002
N0120064
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Brass Long return oil pipes. Porsche 911 1974-89 (93020704603/1
1 x Oil tube to front cooler. Porsche 911 1980-89 (93020711306/1
1 x Brass long intake oil pipe. Porsche 911 1974-86 (93020704503/1
1 x Oil tube to front cooler. Porsche 911 1974-89 (93020711107/1
1 x Radiator oil cooler, Front. Porsche 911 1980-89 (93020705304/2
3 x Radiator oil cooler rubber mount. Porsche 911 1978-89 (99970326300/1
3 x Front bumper washer. Porsche 911 1984-89 (90002500703
6 x Radiator Oil Cooler Rubber Mount Lock nut. Porsche 911 1980>> (PCG91002202
3 x Oil tube mount hose. Porsche 911 1972-89 (91120730200
2 x Locking nut B6 (N0120064
3 x Long Oil Pipe Support. Porsche 911 1969-89 (91120730300
3 x Heatshield Locking Bolt washer. Porsche Boxster 986 (90015100703
3 x Tapping Screw BZ 6,3 x 32 (90018703203
1 x Oil Pipe Support Clamp. Porsche 911 1972-89 (99951108402
1 x Oil Pipe Support Clamp. Porsche 911 1972-89 (99951108002
2 x M6 x 20 Hex. Head Bolt for Multiple Applications (90037803001/1
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Price: €1,012.24 inc. VAT
Due In 30+ Days
93020723902/1KIT
Product Information
This replacement buffer is a high-quality replacement for the factory bonded-rubber mounts used to support the oil cooler assembly in air-cooled Porsche engines. It helps isolate vibration, maintain correct alignment, and protect the cooler and adjoining hardware.
Fits:
Porsche 911 1984 - 1989
Diagram Ref No 14.
This is a rubber buffer or mount (often bonded to metal inserts) used to cushion and secure the oil cooler assembly relative to the engine or chassis. It absorbs vibration, prevents metal-to-metal contact, and keeps the cooler in its correct position. It helps avoid stresses on oil cooler brackets, lines, and mating surfaces by providing a flexible mounting point.
Replaces: Porsche 930.207.239.00 / 930.207.239.01 / 930.207.239.02
Position: Between oil cooler and engine or chassis mount — isolates vibration and supports alignment
Function: Absorbs vibration and engine movement, prevents stress on oil cooler lines and brackets
Installation: Direct-fit OE replacement — install as a set for best results
Maintenance Tip: Replace when rubber hardens, cracks, or separates from metal housing
Over time, the rubber in the buffer mount degrades due to heat, oil exposure, ozone, vibration, and fatigue. It may harden, crack, shrink, or separate from its bonded metal insert. A failed mount lets the oil cooler shift or vibrate more than designed, putting strain on cooler hoses, brackets, and mounting flanges — potentially leading to leaks or damage. Excessive vibration may cause noise, misalignment, or premature fatigue of supporting parts. You should replace this buffer when you notice damage or deterioration, when removing or servicing the oil cooler, or as preventive maintenance on high-mileage engines.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020723902
The product you are viewing cross references to these numbers
Product Information
Radiator oil cooler rubber buffer, SET OF 3This replacement buffer is a high-quality replacement for the factory bonded-rubber mounts used to support the oil cooler assembly in air-cooled Porsche engines. It helps isolate vibration, maintain correct alignment, and protect the cooler and adjoining hardware.
Fits:
Porsche 911 1984 - 1989
Diagram Ref No 14.
This is a rubber buffer or mount (often bonded to metal inserts) used to cushion and secure the oil cooler assembly relative to the engine or chassis. It absorbs vibration, prevents metal-to-metal contact, and keeps the cooler in its correct position. It helps avoid stresses on oil cooler brackets, lines, and mating surfaces by providing a flexible mounting point.
Replaces: Porsche 930.207.239.00 / 930.207.239.01 / 930.207.239.02
Position: Between oil cooler and engine or chassis mount — isolates vibration and supports alignment
Function: Absorbs vibration and engine movement, prevents stress on oil cooler lines and brackets
Installation: Direct-fit OE replacement — install as a set for best results
Maintenance Tip: Replace when rubber hardens, cracks, or separates from metal housing
Over time, the rubber in the buffer mount degrades due to heat, oil exposure, ozone, vibration, and fatigue. It may harden, crack, shrink, or separate from its bonded metal insert. A failed mount lets the oil cooler shift or vibrate more than designed, putting strain on cooler hoses, brackets, and mounting flanges — potentially leading to leaks or damage. Excessive vibration may cause noise, misalignment, or premature fatigue of supporting parts. You should replace this buffer when you notice damage or deterioration, when removing or servicing the oil cooler, or as preventive maintenance on high-mileage engines.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020723902
93020723900
93020723901
93020723902
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
3 x Radiator oil cooler rubber buffer. Porsche 911 1984-89 (93020723902/1
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €14.04 inc. VAT
In Stock - 24 Hour Dispatch
.png?width=197&height=148 "Air duct diverter plate centre oil cooler. Porsche 911 1974-89 - 1-treb8")
93020793091/1
Product Information
Fits:
Porsche 911 / 930 - 1974 to 1989
Product Information
Air duct diverter plate centre oil cooler. Fits:
Porsche 911 / 930 - 1974 to 1989
Optimize Airflow for Maximum Cooling Efficiency
Enhance your center-mount oil cooler setup with this air duct, designed to sit behind the cooler. It creates a streamlined exit path for air, significantly improving airflow and boosting cooling performance.
RS/RSR Diverter Plate Replica
This oil cooler panel is a precise replica of the original RS/RSR diverter plate. Installed by cutting out the front of the tub and welding the panel in place, it securely mounts the oil cooler. Air enters from the front, passes through the cooler, and is efficiently diverted downward. Some trimming may be required for a perfect fit. Compatible with 1974-89 911/912/930 models.
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 912E 4CYL 1976
Price: €270.33 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91162412101
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91162412101
The product you are viewing cross references to these numbers
Product Information
Auxiliary Fan for Front Oil Cooler. Only in combination with bracket part number PCG62410400 (position 42 on diagram).Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91162412101
91162412101
PCG62410400
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €610.12 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PCG62410400
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG62410400
The product you are viewing cross references to these numbers
Product Information
Bracket for Front Oil Cooler Auxiliary Fan part no 91162412101Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG62410400
91162412101
PCG62410400
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €65.65 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
8201
Product Information
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8201
The product you are viewing cross references to these numbers
Product Information
Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8201
8201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €596.70 inc. VAT
Orderable - 5 to 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
8202
Product Information
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits:
Porsche 911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8202
The product you are viewing cross references to these numbers
Product Information
Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits:
Porsche 911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8202
8202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €596.70 inc. VAT
Orderable - 5 to 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
11F-R130
Product Information
Fits:
Porsche 911 2.7RS / 2.8 RSR - 1973
Porsche 911 G-Body backdates - 1974 to 1989
Kit Includes
Front bumper centre oil cooler
Oil cooler mounts, brackets and screws
Oil cooler pipe x 2
Oil pipe connector x 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
11F-R130
The product you are viewing cross references to these numbers
Product Information
Oil cooler kit for front bumper. Fits:
Porsche 911 2.7RS / 2.8 RSR - 1973
Porsche 911 G-Body backdates - 1974 to 1989
Kit Includes
Front bumper centre oil cooler
Oil cooler mounts, brackets and screws
Oil cooler pipe x 2
Oil pipe connector x 2
Modification and welding is required to the trunk front section.
The centre oil cooler can be added to the existing front wing oil cooler circuit.
Dimensions:
Total width (without connectors) = 58 cm
Height with connecting support: 12 cm
Depth: = 6,3 cm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
11F-R130
91110705101
90091500802
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €1,723.29 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
93020726501
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 38
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020726501
The product you are viewing cross references to these numbers
Product Information
Oil Cooler Pipe Rubber Mount.Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 38
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020726501
93020726501
93020726500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €14.43 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
93020726501/1
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 38
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020726501
The product you are viewing cross references to these numbers
Product Information
Oil Cooler Pipe Rubber Mount.Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 38
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020726501
93020726501
93020726500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €10.53 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
SR009
Product Information
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
The product you are viewing cross references to these numbers
Product Information
Oil cooler tester for Porsche 911No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
90110704103
91110704102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €174.28 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99959142940
Product Information
Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 30.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959142940
The product you are viewing cross references to these numbers
Product Information
Plastic Expansion Rivet for oil cooler cover plate.Fits:
Porsche 911 1984-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 30.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959142940
99959142940
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €1.11 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91110704102
Product Information
Radiator type fits in engine compartment.
Fits:
Porsche 911 1972-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704102
The product you are viewing cross references to these numbers
Product Information
Radiator engine oil cooler.Radiator type fits in engine compartment.
Fits:
Porsche 911 1972-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704102
91110704100
91110704102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €1,150.03 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
91110704102/1
Product Information
Radiator type fits in engine compartment.
Fits:
Porsche 911 1972-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704102
The product you are viewing cross references to these numbers
Product Information
Radiator engine oil cooler.Radiator type fits in engine compartment.
Fits:
Porsche 911 1972-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704102
91110704100
91110704102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €871.65 inc. VAT
Stock Due - No Delivery Date
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
-
101-05
-
101-10
-
103-05
-
104-00
-
104-01
-
104-05
-
107-12
-
201-00
-
108-00
-
301-05
-
302-00
-
401-00
-
302-05
-
302-07
-
304-00
-
306-00
-
601-00
-
604-00
-
701-00
-
701-01
-
801-30
-
801-31
-
802-00
-
802-01
-
802-05
-
803-00
-
803-05
-
804-15
-
804-20
-
810-00
-
811-12
-
811-30
-
813-01
-
813-05
-
813-20
-
813-45
-
813-55
-
901-02
-
901-03
-
902-05
-
902-56
-
903-00
-
904-05
-
904-10
-
702-10
-
807-07
About Oil Radiators / Heat Exchangers
Oil Radiators & Heat Exchangers – Optimal Temperature Control for Porsche Performance
Oil radiators and heat exchangers are crucial components in your Porsche’s engine and transmission cooling systems. They regulate oil temperature by transferring heat away from the lubricating or hydraulic fluids, ensuring consistent performance, efficient lubrication, and long-term engine protection — even under extreme driving conditions.
At Design911, we offer a complete range of genuine and manufacturer-quality oil radiators and heat exchangers for Porsche models including 911, Boxster, Cayman, Cayenne, Macan, and Panamera. Each unit is engineered for precise fitment, efficient heat transfer, and long-lasting reliability — maintaining the high-performance standards that Porsche vehicles are known for.
What Do Oil Radiators & Heat Exchangers Do?
Oil radiators and heat exchangers serve a vital role in
temperature regulation and system protection. They:
- Dissipate
heat from engine or transmission oil to prevent overheating.
- Maintain
stable oil temperature for optimal viscosity and lubrication.
- Extend
component lifespan by preventing thermal damage.
- Support engine and gearbox efficiency under heavy load or high-speed conditions.
By controlling oil temperatures, these parts ensure consistent power delivery, reduced wear, and greater reliability — whether on the road or track.
Why Do Oil Radiators & Heat Exchangers Fail?
Despite being built to handle extreme conditions, these
components can fail over time due to wear, corrosion, or contamination. Common
causes include:
- Corrosion
or internal blockage from debris or degraded fluids.
- Physical
damage from road debris or impact.
- Oil
or coolant leaks due to cracked housings or seals.
- Reduced
heat transfer efficiency from clogged fins or internal scaling.
- Age-related deterioration of internal passages or gaskets.
Symptoms of failure include oil leaks, rising engine temperatures, reduced oil pressure, or contamination between the oil and coolant systems.
Why Replace a Faulty Oil Radiator or Heat Exchanger?
A damaged or inefficient oil radiator can cause overheating, loss of lubrication, and serious engine or transmission damage. Replacing faulty units restores cooling efficiency and ensures your Porsche continues to deliver peak performance and reliability.
Benefits of replacement include:
- Restored oil temperature control and pressure stability.
- Prevention of overheating and oil contamination.
- Improved engine and gearbox longevity.
- Manufacturer-quality construction and fitment for peace of mind.
Each radiator and heat exchanger in this range is designed to meet or exceed factory standards, using advanced materials and precision manufacturing for superior durability, corrosion resistance, and cooling performance.
You may also like
Popular Models
.png){kind=link}
