Dashboard Parts

Headlight washer system tip switch.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1977-89
Porsche 914-1,8V/1,8 / 914-2,0 1974-76

* Please check and match the part number of your relay in your car before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161331903

The product you are viewing cross references to these numbers

Climate control knob set.
Includes two black knobs and one red knob.

Fits:
Porsche 911 (1965-1985)
Porsche 912 (1965-1969)
Porsche 914 (1970-1976)
Porsche 930 (1976-1985)

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SMC571SET

The product you are viewing cross references to these numbers

Alloy Ignition Switch Surround.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-96

Knee pad, Leatherette, Black.
RIGHT for RHD cars



Fits:
For RHD cars
Porsche 911 1986-89
Porsche 964 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 12 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552070017AE

The product you are viewing cross references to these numbers

Light switch insert.



Fits:
Porsche 911 1978-89

This product supersedes Porsche's old part numbers:
- 91161323901

Click 'Zoom in' for large parts diagram.
Diagram ref no 55

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161323902

The product you are viewing cross references to these numbers

Lower dash delete cover, in Black.



Fits:
Porsche 911 / 912 / 930 1975-85

Is the knee pad on your 1974-1985 911 becoming an eye sore? Original parts are getting rare, and extremely expensive. This aluminum knee pad panel has been designed to mimic the factory contours, but will last forever. We love reducing weight, so our design weighs in at just 1.6 pounds; one pound lighter than your factory installed piece.
Comes in black textured powder coat to complement existing factory dash components.

Luggage compartment dash cover.
Replacement card board type cover with fixing points



Fits:
Porsche 911 1978 Onwards LHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106705

The product you are viewing cross references to these numbers

Luggage compartment dash Cover.
Replacement card board type cover with fixing points

Fits:
Porsche 911 1976-77 Carrera 3.0
Porsche 911 1978-89

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106705

The product you are viewing cross references to these numbers

Luggage Compartment Dash Cover. Replacement card board type cover with fixing points



Fits:
Porsche 911 1978 Onwards RHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106802

The product you are viewing cross references to these numbers

Radio blanking plate trim.



Fits:
Porsche 911 1984-86
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115524630270B

The product you are viewing cross references to these numbers

Radio delete cubby pocket.



Fits:
Porsche 911 - 1974 to  1989

When removing the radio, it was impossible to find a replacement cubby that fit perfectly, maximized the space, and looked like it was meant to be there. All aftermarket cubbies were either too thin, poorly fitting, or impossible to mount, and none of them had a well-finished surround trim.

Now offering this radio delete cubby pocket to anyone who wants to utilise the space for more storage instead of using available block-off plates. The pocket is made from PA12 nylon, making it very durable and resistant to heat, chemicals, and wear. The finish texture resembles typical car plastic parts.

Inside dimensions of the pocket:

Width: 177mm / 6.95"
Height: 44mm / 1.73"
Depth: 102mm / 4" (deep enough to hold a phone but not too deep to make it hard to pull items out)

Installation involves sliding the pocket into the opening, then sliding four retaining blocks (three on the bottom, one on the top) from the back of the pocket into the guides. These blocks securely attach the pocket against the metal dash. After the blocks are in place, use a thin needle or nail to align the nuts inside the blocks with the holes in the pocket. Finally, fasten everything with seven screws (this needs to be done inside the pocket, so it’s best to use a Phillips head screwdriver attachment; finger tight should be enough—do not over-tighten).

Included:

• Pocket
• 4 mounting blocks
• 7 screws

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155246302

The product you are viewing cross references to these numbers

Rear Fog Lamp Switch Insert.



Fits:
Porsche 911 1978-89
Porsche 964 1989-94

This product supersedes Porsche's old part numbers:
- 91161323401
- 91161323402

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116132340201C

The product you are viewing cross references to these numbers

Rennline aluminium heater control knob



Fits:
Porsche 911/912/930 1972-89

Rennline's billet aluminium heater control knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory heater control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply tap off your old knob, and tap ours on, installation is literally a snap.

Rennline Aluminum lower dash cover

Fits:
Porsche 911/912/930 All 1965-84
FOR LHD (LEFT HAND DRIVE) cars


This super lightweight dash cover has been specifically designed to finish off that stripped out dash of your 911 race car. This one piece unit covers the entire bottom half of the dash area from the top pad down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added during installation. All stainless steel hardware is included for an easy installation. Available in brushed or black powder coat finish.

Note: Dash padding and glove box must be removed for installation.

Note: Pictures may not show actual product.

Rennline Aluminum lower dash cover



Fits:
Porsche 911/912/930 All 1985-89
Porsche 964 1989-95
Porsche 993 1995-98
FOR LHD (LEFT HAND DRIVE) CARS


This super lightweight dash cover has been specifically designed to finish off that stripped out dash of your 911 race car. This one piece unit covers the entire bottom half of the dash area from the top pad down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added during installation. All stainless steel hardware is included for an easy installation. Available in brushed or black powder coat finish.

Note: Dash padding, glove box and passenger side airbag must be removed for installation.

Note: Pictures may not show actual product.

Rennline billet aluminium A/C fan speed control knob. 



Fits:
Porsche 911 - 1974 to 1989

Product Description

Is your 911 AC panel missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. 
These billet aluminum knobs will help.

Anodized black and then engraved, these will give you the perfect blend of subtlety and style. 

Sold individually

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I139

The product you are viewing cross references to these numbers