Engine Valves / Guides / Springs

Engine cylinder head exhaust valve kit.
Kit includes exhaust valve x 6

Fits:
Porsche Carrera 3.0ltr - 1976 to 1977 
Porsche 911 SC 3.0ltr - 1978 to 1983 
Porsche 911 3.2 Carrera 1984 to 1989 

Diameter - 41.5mm

Click 'Zoom in' for large parts diagram.
Diagram Ref No 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010541951

The product you are viewing cross references to these numbers

Engine cylinder head inlet valve kit.
Kit includes inlet valve x 6

Fits:
Porsche Carrera 3.0ltr - 1976 to 1977 
Porsche 911 SC 3.0ltr - 1978 to 1983 
Porsche 911 3.2 Carrera - 1983 to 1989

93010540900
93010540901
93010540913

Valve head diameter 49,00 mm
Valve stem diameter 9,00 mm
Length 110,10 mm
Valve seat angle 45 °

Click 'Zoom in' for large parts diagram.
Diagram Ref No 9.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010540901

The product you are viewing cross references to these numbers

High performance valve spring, seat and retainer kit 9mm. 

Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Our Valve Springs are designed and manufactured to specifically fit the envelope of a Porsche application not a spring from another use. 

It operates a higher natural frequency than the original spring for racing and at the very least minimizes damage from over rev in track day situations. 

Kit includes
High performance valve spring x 12
High performance valve spring seat x 12
High performance 9mm titanium valve spring retainer disc x 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HP109HSSKIT

The product you are viewing cross references to these numbers

SET OF 12 valve guides - standard. Inlet x 6 and exhaust x 6.

This is the standard valve guide used in early air-cooled Porsche 911/930 cylinder heads. It’s a plain (non-hydraulic) guide that locates the valve stem in the head; when worn it causes oil burning, loss of compression and poor valve seating — so they’re commonly replaced whenever heads are rebuilt.

What the part is (technical data / dimensions)

Application: Porsche 911 / 930 from about 1965–1989 (varies slightly by model and year; early cars both intake & exhaust, later years sometimes exhaust only). Standard size (typical OE): ID ≈ 9.00 mm, OD ≈ 13.06 mm, length ≈ 51.2 mm.        

Fits:Porsche 911 1965-1968 2.0L / 912 SWB (F)Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)Porsche 911 1974-1977 2.7L / 1976-77 3.0 CarreraPorsche 911 1978-1983 3.0L / SCPorsche 911 1984-1986 3.2LPorsche 911 1987-1989 3.2L G50Porsche 911 1975-1977 3.0L Turbo (930)Porsche 911 1978-1989 3.3L Turbo (930)

Why these guides should be replaced

Valve guides are a wearing item. Replace them when any of the following occur or when you rebuild the engine head.Excessive valve stem play — worn guide ID internal diameter lets the valve rock and misalign with the seat , poor sealing, reduced compression and power.Oil consumption / smoking — worn guides allow oil to wick down the stem into the combustion chamber, causing blue/grey smoke and fouled plugs.Hard starting, rough idle, misfire — poor sealing / valve timing irregularities from misaligned valves.Valve wobble that leads to premature valve stem wear or valve seat damage — once stems or seats are damaged you need deeper surgery.If a guide is cracked, broken, or has excessive ovality — must be replaced.Whenever you remove and refinish seats / replace springs / do a full head rebuild — replacing guides at that time is cheap insurance and ensures correct alignment. 

Inner diameter 9,00 mm
Outer diameter 13,06 mm
Total Length 51,20 mm

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2 and 2A.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010432100

The product you are viewing cross references to these numbers

Valve spring engine set.
Complete engine valve spring set - inner and outer springs



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Valve springs endure significant thermal stress, which can cause them to lose tension over time. A broken spring can lead to severe engine damage, therefore, it's crucial to inspect and replace the springs as needed during an engine overhaul. The intake and exhaust valves use identical springs, consisting of an inner and outer spring pair for each valve. Alongside these, we offer a comprehensive selection of engine repair components, including valve stem seals and valve guides.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPRINGKIT01

The product you are viewing cross references to these numbers

Valve stem seals. Porsche 911 / 964
PACK OF 12



Fits:
Porsche 911 - 1968 to 1989 (12 Per Engine)
Porsche 964 3.6ltr - 1989 to 1994 (12 Per Engine)
Porsche 964 turbo - 1991 to 1994 (12 Per Engine)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410411107

The product you are viewing cross references to these numbers