U Joints and Shafts

Shear bolt for the steering shaft.



Fits:
Porsche 911 (1965-1989)
Porsche 912 (1965-1969)
Porsche 930 (1976-1989)
Porsche 964 C2/C4 (1989-1994)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134775301

The product you are viewing cross references to these numbers

Spring nut for steering cover and clock.



Fits:
Porsche 911 1965-89
Porsche 911 Turbo only up to 1977
Porsche 928 S 1983–86

Click 'Zoom in' for large parts diagram.
Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950720901

The product you are viewing cross references to these numbers

Steering column bearing support bush.



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 24.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134722303

The product you are viewing cross references to these numbers

Steering Column Bearing Support Bush.
OEM Part Number: 90134722303/1



Fits:
Porsche 911 1965-89
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 24


Powerflex. Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-405

The product you are viewing cross references to these numbers

Steering Column Bearing Support Bush.
OEM Part Number: 90134722303/1



Fits:
Porsche 911 1965-89
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-405BLK

The product you are viewing cross references to these numbers

Replacement steering column bearing support bush
OEM Part Number: 90134722303/1



Fits:
Porsche 911 1965-89
Porsche 914 1970-76

POWERFLEX Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Click 'Zoom in' for large parts diagram
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-405H

The product you are viewing cross references to these numbers

Billet aluminium steering column bearing.



Fits:
Porsche 911 / 912 / 930 All

If you have never changed your lower steering column bearing that's located in the smuggler's box, there's a good chance that the bearing inside the rubber housing is non-existent. This bearing helps to prevent slop in the steering linkage assembly, but over time, the needle bearing inside gets corroded and ultimately disintegrates. This is often mis-diagnosed as a bad tie rod end because effect on the steering response is very similar. Rennline has created a billet aluminum housing the includes a pressed in needle bearing and unlike the factory unit, this one includes two weather seals to protect the bearing.

Replace it once and don't worry about it again.

Steering outer tube with shift assembly. For LHD cars



Fits:
Porsche 912 /  911 1965-1973 LHD

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134707300

The product you are viewing cross references to these numbers

Steering rack coupling.



Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram,
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134720102

The product you are viewing cross references to these numbers

Steering rack coupling.



Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134720102

The product you are viewing cross references to these numbers

Steering rack coupling.
More than 30% stiffer than the original equipment
Guaranteed fitment



Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134720102HD

The product you are viewing cross references to these numbers

Steering rack tab washer.
2 required per car. Sold as single.



Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134724800

The product you are viewing cross references to these numbers

Steering rack tab washer. 

2 required per car. Sold as single.



Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134724800

The product you are viewing cross references to these numbers

Steering shaft bearing. 



Fits:
Porsche 911 - 1965 to 1973
Porsche 914-6 - >>1971
Porsche 356 B / 356 C - 1960 to 1965

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434771100

The product you are viewing cross references to these numbers

Steering shaft bearing. 



Fits:
Porsche 911 1965-73
Porsche 914-6 >>1971
Porsche 356 B / 356 C 1960-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434771100

The product you are viewing cross references to these numbers

Steering Shaft Cover for LHD Cars.



Fits:
For LHD Cars only
Porsche 911 1965-89
Porsche 911 (930) 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134706700

The product you are viewing cross references to these numbers