Rear Section

Rear tow hook 300MM (without stand).

Fits:
Porsche 911 1965-89

Tow hook FIA Porsche 911 length: 300 mm diameter: 80 mm color: red

Rear tow hook 400MM (without stand).

Fits:
Porsche 911 1965-89

Tow hook FIA Porsche 911 length: 400 mm diameter: 80 mm color: red

Rear tow hook.

Fits:
Porsche 911 1965-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150603101

The product you are viewing cross references to these numbers

Wheel case support - kidney  bowl.
To be welded to the wheel house.

Fits:
Porsche 911 01/1963-07/1971

Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150114

The product you are viewing cross references to these numbers

Repair panel - complete rear wheel housing / inner wing. 

Fits:
Porsche 911 Coupe LWB (Long-Wheelbase) 2.0L 1969
Porsche 911 Coupe 2.2L 1970-71

Fits (Modification Required*):
Porsche 911 Coupe SWB (Short-Wheelbase) 2.0L 1965-68
Porsche 911 Coupe 2.4L 1972-73

Diagram ref. 18.

*NOTE: This panel is a direct replacement for long-wheelbase 911 models from model years 1969-1971 (2.0L / 2.2L). It can be modified to fit short-wheelbase models from model years 1965-1968. Additionally, it is compatible with 2.4L 911 models from model years 1972-1973 equipped with the 915 gearbox, though modifications are necessary due to the gearbox change.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG50101

The product you are viewing cross references to these numbers

Reinforcement plate rear chassis rail / cross member.
Sold as a pair

Fits:
Porsche 911 - 1965 to 1989

Reinforcement for longitudinal beam for left and right side
Used with all Porsche 911 for rally and racing applications

Reinforcing plate.



Fits:
Porsche 911 Targa (1969 to 1973)

Part highlighted in green on diagram.
Click 'Zoom in' for diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150125

The product you are viewing cross references to these numbers

Repair panel side member / chassis leg. 

Fits:
Porsche 911 - 1965 to 1989

Rear side member / chassis leg patch panel, inner.
This panel is located on the engine side of the frame rail.

Section of diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150196

The product you are viewing cross references to these numbers

Repair piece, 1/2 rear seat well bottom plate.
Porsche 911 (901 gearbox) 1963-71



Fits:
Porsche 911 (901 gearbox) 2.0L-2.4L 1963-1972

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150177

The product you are viewing cross references to these numbers

Roof frame set, 3 pieces.

Fits:
Porsche 911 Coupé 2.0L - 2.7L  10/1964 - 07/1973
Porsche 911 Coupé 2.7L - 3.0L  08/1973 - 12/1977 

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150202

The product you are viewing cross references to these numbers

Seat back/rear bulkhead.



Fits:
Porsche 911 1965-71

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150208100

The product you are viewing cross references to these numbers

Seat back/rear bulkhead.



Fits:
Porsche 911 1972-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150208100

The product you are viewing cross references to these numbers

Seat mounting bracket rear. 

Fits:
Porsche 911 - 1965 to 1985
Porsche 911 turbo - 1975 to 1985
Porsche 356B - 1960 to 1963
Porsche 356C - 1963 to 1965

This bracket acts as a hinge point for the rear seats.

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150104100

The product you are viewing cross references to these numbers

Rear seat well bottom repair chassis panel



Fits:
Porsche 911 (901 gearbox) 2.0ltr to 2.2ltr 08/68-07/72

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150107100

The product you are viewing cross references to these numbers

Spring Plate Reinforcement Kit
Sold per kit, 1 kit req'd per car.

Fits:
Porsche 911/912/930 1965-89

Repair or prevent spring plate mounts from cracking.

Repair or prevent spring plate mounts from cracking
Spring Plate Mount Reinforcement Panels will help prevent or repair the common problem of cracked spring plate cover mounts resulting from worn, deformed, or stuck bushings in the cover.

Elephant Racing Rear Spring Plate Mount Reinforcement Panels are precision laser-cut and formed panels from 18 gauge steel. These panels distribute the torsion bar and spring plate loads into the torsion tube housing and multi-layer sheet metal just beyond the original mounting boss locations.

Excess heat during the welding process will tend to distort the sheet metal moving the mounting studs out of alignment. The included Mounting Stud Alignment Panel will help maintain their original spacing allowing for much easier reassembly.

At this time, you may also be interested in replacing your bushings or upgrade to Elephant Racing's PolyBronze spring plate bushings.

Please note: Welding is required to install properly

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2061003

The product you are viewing cross references to these numbers

Targa rollover bar bottom filler plate.



Fits:
Porsche 911 1965-89 Targa

This part replaces old numbers: 90150120340, 90150120341, 90150120440, 90150120441,

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150120

The product you are viewing cross references to these numbers