Engine Bolts / Studs

Exhaust head stud. Made out of Titanium (Grade 5 Ti-6Al-4V) M8 x 22
Sold each.



Fits
Porsche 911 1965 - 83

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010601T

The product you are viewing cross references to these numbers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS12

The product you are viewing cross references to these numbers

Exhaust head stud repair kit for Porsche Air-cooled 911's



Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.

Now includes our SR065D drill guide.

Fits ALL of the 911 heads including the 993.

Exhaust head stud, BM 8 X 22 SN 1115
Sold each.



Fits
Porsche 911E
Porsche 911S

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010601

The product you are viewing cross references to these numbers

Exhaust head stud, BM 8 X 22 SN 1115
Sold each.



Fits
Porsche 911E
Porsche 911S

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010601

The product you are viewing cross references to these numbers

Exhaust head stud
Sold each.



Fits
Porsche 911T >>1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906200804

The product you are viewing cross references to these numbers

Exhaust head stud
Sold each.

Fits
Porsche 911T >>1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906200804

The product you are viewing cross references to these numbers

Gearbox housing stud, M 10 X 25.



Fits:
Porsche 911 1972-73 (TYP 915)
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906218202

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (non Turbo)
Porsche 993 All
Porsche 996 (non Turbo)
Porsche 997 (non Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-12

The product you are viewing cross references to these numbers

Screw for crankcase.



Fits:
Porsche 911 /S (1965 to 1977; with 2.7L engines)
Porsche 914-6 (1970 to 1972)

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110117300

The product you are viewing cross references to these numbers

Stud bolt, M10x69. Each.



Fits:
Porsche 914/6 (1970 - 1972)
Porsche 911 F  (1965 - 1973)
Porsche 911 Carrera (1984 - 1986)
Porsche 911 Turbo (1975 - 1986)

Click 'Zoom in' for large parts diagram.
Diagram ref no 6 (and no 7 for 914 only)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906103402

The product you are viewing cross references to these numbers

Through bolt o-ring installer for Porsche 911



Installing O-rings on the through bolts for a 911 engine case often slices the rings on the threads of the bolt, leading to ripped seals at best, or a leaky engine at worst. Use this cap to protect the O-ring and to insure a factory quality seal. Precisely machined from quality brass.

Stomski Racing SR024 Through bolt o-ring installer with sleeve for Porsche 911



Based on the factory P9511 tool, STOMSKI RACING's version of this tool incorporates a brass cap and a double-ended stainless steel sleeve to install the o-rings on the crankcase through-bolts of the 3.6 and later cases (but possibly can be used on some other 911 engines). By using the included brass cap to protect the delicate o-ring from getting cut on the threads of the bolt, you then use the "thin" end of the sleeve to slide the o-ring over the brass cap onto the shank of the through-bolt. Once the o-ring is clear of the threads, remove the SR024 brass cap and flip the SR024 stainless steel sleeve over and use the blunted end to securely and gently seat the o-ring in the recess on the 3.6 case.

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-121

The product you are viewing cross references to these numbers