Wiring harness

Window motor wiring loom with connector - left door.



Fits:
Porsche 911 - 1969 to 1989

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161210401

The product you are viewing cross references to these numbers

Wire harness brake light warning control panel harness, US VERSION.

Fits:
Porsche 911 1984 - 1986
USA spec.

Harness for brake and seatbelt warning control light panel * to relay socket and 2 x switch on master brake cylinder.

 * This harness requires to ship your original harness because some parts are NLA

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161204118

The product you are viewing cross references to these numbers

Wire harness brake light warning control panel harness,   US VERSION.

Fits:
Porsche 911 SC 1978 - 1983
USA and Canada spec.

Harness for brake and seatbelt warning control light panel to relay socket and 2 x switch on master brake cylinder.
Harness connects to tunnel harness with 2 pole connector.

 A new 8 pole PCB connector (AMP 925077) is included.

2 connectors need to be re-used from original harness (NLA).


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161204112

The product you are viewing cross references to these numbers

Wire harness for front.

Fits:

Porsche 911 or 912 1969 

Fully prepared 911 1969 front harness with 2 x 6 pole male connector and relay base (for horn) with the only for 1969 thick positive wire.

•   Waxed lacing wire and each wire at the right length.
•   Runs from fuse box to left and right fender / left washer pump.
•   Original colour coded wiring.
•   Harness will exactly fit like the original.
•   Wire tube, and oil resistant tape as original.
•   Terminals have rubber sleeves.
•   2 new male connectors and relay socket included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161205000

The product you are viewing cross references to these numbers

Wire harness for hazard warning switch.
Comes with moulded connector
Includes 8 position connector housing for the back of the hazard switch.



Fits:
Porsche 911 1970-1972

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161201400

The product you are viewing cross references to these numbers

The hazard switch harness is routed from the back of the hazard switch to the front luggage compartment harness.



Fits:
Porsche 911 1973-1984

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161201430

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.

Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)

Special order made to order parts please allow 2 – 3 weeks

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93061200109

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.
Complete front harness from fuse box to front, headlights, horns, turn signal, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

Fits:
Porsche 901- 911 and 912 1964-1965

* This is the model that fits only 1964 and 1965 911 /912 with the washer pump on the right !

 New 4 pole fuel connector included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
•  Gasoline, oil, battery acid, engine coolant resistant. 
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous. 
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101A

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.

Fits:
Porsche 911 and 912 1966-1968

Complete front harness from fusebox to front, headlights, horns, turn signal, washer pump, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

New 4 pole fuel connectors included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
•  Gasoline, oil, battery acid, engine coolant resistant.
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.

Fits:
Porsche 911 and 912 1966-1968 (Zuffenhausen) 
* this is the taped version, only used for car's build at Zuffenhausen

Complete front harness from fuse box to front, headlights, horns, turn signal, washer pump, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

New 4 pole fuel connectors included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53 Gasoline, oil, battery acid, engine coolant resistant.
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101Z

The product you are viewing cross references to these numbers

Wire harness Main (Trunk harness).

Fits:
Porsche 911 Carrera 3.2 1985 LHD (Left Hand Drive)

Complete mainharness with original colour coded wiring. Runs from front fusebox to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions. 

• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53~
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Note: (Shown fuseboxes and mounting frame are not included and need to be ordered separately)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200218

The product you are viewing cross references to these numbers

Wire harness Main (Trunk harness).

Fits:
Porsche 911 Carrera 3.2 1986 LHD (Left Hand Drive)

Complete mainharness with original colour coded wiring. Runs from front fusebox to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions. 

• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Note: Shown fuseboxes and mounting frame are not included and need to be ordered separately.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200219

The product you are viewing cross references to these numbers

Wire harness Main (Trunk harness).

Fits:
Porsche 911 Carrera 3.2 1987 LHD (Left Hand Drive)

Complete mainharness with original colour coded wiring. Runs from front fusebox to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions. 

• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Note: Shown fuseboxes and mounting frame are not included and need to be ordered separately.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200220

The product you are viewing cross references to these numbers

Wire harness Main (Trunk harness).

Fits:
Porsche 911 Carrera 3.2 1989 (Left Hand Drive)

Complete mainharness with original color coded wiring. Runs from front fusebox to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions. 

• As original colored wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Note: Shown fuseboxes and mounting frame are not included and need to be ordered separately.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200226

The product you are viewing cross references to these numbers

Wire harness Main (Trunk harness).

Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)

Complete main harness with original colour coded wiring. Runs from front fuse box to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions.

• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Please note: Shown fuse boxes and mounting frame are not included and need to be ordered separately.

Special order made to order parts please allow 2 – 3 weeks

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93061200202

The product you are viewing cross references to these numbers

Wire set for Driver's door.



Fits:
Porsche 911 1978-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161216303

The product you are viewing cross references to these numbers