Wiring harness

Rear Indicator light wire harness - US Spec cars



Fits:
Porsche 911 - 1978 to 1986 (US / Canada)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161203911

The product you are viewing cross references to these numbers

Harness for the rear window wiper

Runs through the tunnel to the rear wiper motor
Does not include diode



Fits:
Porsche 911 1974-89 for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161202501

The product you are viewing cross references to these numbers

Regulator panel wiring harness.
Connects to the engine and tunnel harness and includes a socket for the auxiliary start-up relay and speed switch. Also includes two grommets for panel pass through. This version is compatible with Bosch voltage regulators. *Sporto connector housing not included*



Fits:
Porsche 911 1971-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200410

The product you are viewing cross references to these numbers

Trunk light wiring harness loom.

Fits:
Porsche 911/ 912 - 1965 to 1974

Harness in front trunk, connects on left side in trunk to main harness (for double lamps in hood)

As original colored wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.
Handmade to concourse quality.

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204200

The product you are viewing cross references to these numbers

Tunnel harness
Routed from the front fuse panel and gauges to the engine compartment and rear lights.



Fits:
Porsche 911 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200121

The product you are viewing cross references to these numbers

Tunnel heater panel wiring harness loom.

Fits:
Porsche 911 - 1975 to 1986

Harness for center heater control panel (between front seats)

Harness goes from the fusebox (& ground) through the tunnel towards the heater control unit.

Comes with the right female pins but the connector housing needs to be re-used (NLA)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911612152

The product you are viewing cross references to these numbers

This wiring harness is no longer available from Porsche, making this the perfect high-quality replacement. This harness runs from the front fuse box and gauges through the tunnel to the engine bay, ensuring an exact fit like the original. 

Fits:
Right-Hand Drive (RHD) Models
Porsche 911 SC 1978-83

This harness is built to match the original specifications, featuring color-coded wiring for easy identification, wire tubing, and oil-resistant tape as originally used. It includes rubber-sleeved terminals (no shrink tubing – original neoprene sleeves) and high-quality automotive-grade flex wiring that meets ISO6722:2002, DIN72551/6, and EEC Directive 2000/53 standards. The materials are resistant to gasoline, oil, battery acid, and engine coolant, ensuring durability. Additionally, the high-flex sleeving is solvent-resistant and free of halogen, sulfur, and phosphorus for long-lasting performance.

Contents:
- 2x 6-pole male connectors
- 1x 14-pole male connector 
- 1x Relay socket 

- Replacement rubber sleeve & grommet
- Detailed connection instructions

Diagram ref. 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161206127

The product you are viewing cross references to these numbers

Tunnel wiring harness 1973 only - LHD (Left Hand Drive)

Fits:
Porsche 911 - 1973 only

The 1973 tunnel harness is a bit special as for some reason Porsche decided to tape the 1973 tunnel harness instead of using PVC conduit. 
In the PET catalogue this harness has the same part number as the 1972 version.
Complete tunnel harness with original color coded wiring. Runs from front fusebox and gauges through the tunnel to engine bay. 
This Harness will exactly fit like the original. 

Wire tube and oil resistant tape as original. Terminals have rubber sleeves and the harness comes with detailed connection instructions. Two new 6 pole male connectors and 1 x 14 pole female connector included.

This harness is taped, instead of PVC wire sleeving as only used for 1973 models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200121

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.



Fits:
Porsche 911 / 912 - 1969

Complete 911 tunnel harness with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.

Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901612003

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.



Fits:
Porsche 911 - 1972 to 1973

Complete tunnel harness with original colour coded wiring.

Runs from front fusebox / gauges through tunnel to the engine bay.

Harness will exactly fit like the original.

Wire tube and oil resistant tape as original and the terminals have rubber sleeves.

Harness comes with detailed connection instructions.

2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) rubber sleeve and grommet included.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116120

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.



Fits:
Porsche 912 - 1969

Complete 912 tunnel harness with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.

Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90261200300

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.

Fits:
Porsche 930 turbo - 1978 to 1983 Left Hand Drive (LHD)

Complete 911 tunnel harness with original spiral colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube, and oil resistant tape as original.
The terminals have rubber sleeves.
Harness comes with detailed connection instructions.

Two new 6 pole male connector , 1 x 14 pole male connector and 1 x relay socket , rubber sleeve and grommet included.

As original colored wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93061200106

The product you are viewing cross references to these numbers

The tunnel harness is routed from the front fuse panel and gauges to the rear lights and engine bay.



Fits:
Porsche 911 1974-75

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200126

The product you are viewing cross references to these numbers

Turn signal wiring harness.



Fits:
Porsche 911 1978-85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161217701

The product you are viewing cross references to these numbers

Turn signal wiring harness. NR 177.



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 993 >>1996

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161217702

The product you are viewing cross references to these numbers

Two stage rear window defogger harness. Connects to engine bay relay panel with two-pole connector (included). Grommet for rear parcel shelf pass through also included.



Fits:
Porsche 911 1971-83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161203201

The product you are viewing cross references to these numbers