Rotor Arms / Point Sets
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)


Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292801
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera


Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292801
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera


Fits:
Porsche 911T/S SPM 1969
Porsche 911T 1970-73
Porsche 911T 1974-77 *For use with distributors 9160202103 / 91160202107
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292801
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera

Fits:
Porsche 911 2.0L/2.2L 1965-73 (NOT 2.4L)
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Please note that Porsche has discontinued their official product.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160292801
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)


Fits:
Porsche 911 3.2L 1984-89
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060290202
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50


Fits:
Porsche 911 3.0L Carrera 1974-77 200Bhp Cars
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160293000
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera


Fits:
Porsche 911 3.2L 1984-89
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060290202
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50


Fits:
Porsche 911 E 1965-73
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292502
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)


Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera


Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160292900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera

Fits:
Porsche 911SC 3.0L 1978-83
188Bhp & 204Bhp cars
Porsche 930 3.0L / 3.3L 1975-89
Bosch ref: 1234332223 / 1234332196
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060290105
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

Fits:
Porsche 911 all Turbos 3.0L / 3.3L and 911 3.0L without KAT 1975-89
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060290105
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

Fits:
Porsche 911 all Turbos 3.0L / 3.3L and 911 3.0L without KAT 1975-89
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060290105
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)


Fits:
Porsche 912 1965-69
Porsche 356A / 356B / 356C
Porsche 912E
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Please note that Porsche has discontinued their official product.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61660222107
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 912E 4CYL 1976