Carburetors & Parts

Needle valve 2.00mm for Solex carburettor.

Fits:
Porsche 356 1.5L 1600 S 1950-59 with SOLEX 40 PBIC with chassis M >> 81 200
Porsche 356 A / B Carrera GS 1.6L 1959 with SOLEX 40 P II-4/WEBER
Porsche 911 >> 1968 with SOLEX 40 PI-1

Diagram ref no 80

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610090501

The product you are viewing cross references to these numbers

Pan head screw for jet carrier on Solex 40 PI-1 carburettor.
Sold each - 2 required per carburettor

Fits:
Porsche 911 - 1965 to 1968

Diagram ref no 38

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110894400

The product you are viewing cross references to these numbers

Porsche 914/4 2 X 34 ICT



Performance kit to allow fitment of 2 x Genuine Spanish Weber 34 ICT carburettors to the VW T2 1.7 / 1.8 / 2.0 Van, and the Porsche 914/4.
Kit consists of

2 x Weber 34 ICT carburettors
1 x Intake Manifold set
1 x Webcon linkage set, studs, nuts, washers, air filters, Weber tuning manual etc

Please see cross selling products for details of Low Pressure fuel pump

Kit is supplied with the following jet spec


NEEDLE VALVE 175
AIR CORR 160
E TUBE F78
MAIN JET 140
IDLE JET 60
PUMP JET 50
BLEED VALVE 40
AUX VENT 4.5
CHOKE 29
FLOAT HEIGHT 8mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PVW207

The product you are viewing cross references to these numbers

Fits
Porsche 911 - Air cooled engine with Weber Carburettors

Kit Includes

Please see the  PMO vs OE Carb Overview

Pressure release valve on accelerator pump for Solex 40 PI-1 carburettor.
Sold each - 1 required per carburettor

Fits:
Porsche 911 - 1965 to 1968

Push rod for carburettor.



Fits:
Porsche 911 / 912 1965-69
Porsche 914 1970-75

Click 'Zoom in' for large parts diagram.
Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110808900

The product you are viewing cross references to these numbers

Rain shields for K&N air filters on Weber IDF 44/46. 

Rain hats for K&N air filters IDF 40/44 on Weber carbs.

Made from fiber cloth with a honey-coloured resin.

Fits:
Porsche 911 
Porsche 914-6 

Rain shields for Weber and PMO carburators.



Made from fiber cloth with a honey-coloured special resin.

Fits:
Porsche 911 R / ST
Porsche 906
Porsche 914-6 GT


Available in three combinations:
2 x flat
2 x bent
1 x flat + 1 x bent

Relay lever for throttle linkage shaft on Solex 40 PI-1 carburettor. 

Fits:

Porsche 911 2.0ltr - 1965 to 1968

Diagram ref no 61

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110807100

The product you are viewing cross references to these numbers

Repair kit for Solex 40 PI-1 carburettor

Fits:
Porsche 911 - 1965 to 1968

Kit contain
6 x Cover gasket 90110893400
6 x Gasket for jet carrier 90110893300
6 x O-ring for jet carrier 90110894300
6 x Accelerator pump diaphragm 90110893200
6 x Gasket 90110819500
6 x Gasket 90110819600
2 x Gasket for float housing 90110819900
2 x Carburettor needle valve 61610090500
2 x Sealing ring (copper) 61610842300
6 x Sealing ring N0138073
6 x Sealing ring (fiber) N0138305




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110811152

The product you are viewing cross references to these numbers

1.7 / 1.8 / 2.0 Flat 4 aircooled


Webcon replacement carburettor kit to suit the VW Type 4 and Porsche 914 1.7/1.8/2.0 Flat 4 air cooled models

Featuring a genuine Spanish Weber electric choke carburettor, the Webcon kit is designed to fit the original manifold and air filters (unless a new air filter is included), using specially designed adaptors.

Kits are supplied with a good starting jet specification but may benefit from fine tuning on a rolling road

The Webcon replacement range of carburettor kits is the Worlds largest and best engineered range. We have been developing the range in the same facility, using the same engineers since 1978 and every kit that we produce is designed to return your car to factory levels of performance, and in many cases, better the original economy figures. Hot and cold starting, and general driveability will be greatly improved, and the fitment of a genuine Webcon replacement carburettor kit is generally understood to enhance the value of your car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PPO101

The product you are viewing cross references to these numbers

Return spring for carburetor.



Fits:
Porsche 911 F with a Zenith carburetor (1970 to 1973)

Click 'Zoom in' for large parts diagram.
Diagram ref no 61

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110097400

The product you are viewing cross references to these numbers

Securing bracket control rod tension spring for Solex 40 PI-1 carburettor throttle rod
Sold each - 2 required per car

Fits:

Porsche 911 2.0ltr - 1965 to 1968

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110823700

The product you are viewing cross references to these numbers

Service kit to suit the Solex 32 PBI / PICB / PICB



32 PBI / PBIC / PICB Service kit

Service kit to suit the Solex 32 PBI / PICB / PICB as fitted to

Mercedes 220B 1959-1965

Porsche

Rover

Landrover

Service kits include gaskets, seals, diaphrams and needle/seat

Please note that service kits do not include jets, however these are available separately from Webcon if required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9611736000

The product you are viewing cross references to these numbers

Service kit to suit the Zenith Pierburg 40TIN



40TIN Service kit

Service kit to suit the Zenith Pierburg 40TIN as fitted to Porsche 911 2195cc and 2341cc 1969-73

Service kits include gaskets, seals, diaphrams and needle/seat
This service kit includes parts for 2 carburettors

Please note that service kits do not include jets.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9612862000

The product you are viewing cross references to these numbers

Adjusting screw with spring for carburetor idle speed. For Solex 40 PII-4 and 44 PII-4.
2 required. Price is for one kit.



Fits:
For Solex 40 PII-4 and 44 PII-4
Porsche 356 B/C 1.6 01/59-12/65
Porsche 912 1.6 01/65-07/68

Click 'Zoom in' for large parts diagram.
Diagram ref no 42 and 43.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610092701

The product you are viewing cross references to these numbers