Gearshift Control Parts

Powerflex Black Series Shift rod coupling bush.
Replacement OEM Part Number: 96442422300.
Fits inside the Gearshift Coupling part number 91142402404



Fits:
Not for G50 Transaxle

Porsche 356B 1960-65
F >>110 406 COUPE -REUTTER-
F >>153 022 CABRIO HARDTOP
F >> 87 491 ROADSTER

Porsche 911 1970-86
Porsche 911 turbo 1977-86
Porsche 914 1973-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 25


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-430BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Shift rod coupling bush.
Replacement OEM Part Number: 96442422300.
Fits inside the Gearshift Coupling part number 91142402404



Fits:
Not for G50 Transaxle

Porsche 356B 1960-65
F >>110 406 COUPE -REUTTER-
F >>153 022 CABRIO HARDTOP
F >> 87 491 ROADSTER

Porsche 911 1970-86
Porsche 911 turbo 1975-88
Porsche 914 1973-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 25


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-430H

The product you are viewing cross references to these numbers

Shift rod repair set, G50.



Fits:
Porsche 911 Turbo (1987 - 1989)
Porsche 911 Carrera (1987 - 1989)

Kit contents:
1x 95042412401 shift-lever bearing
1x 91142413901 ball socket
1x 99970192340 O-ring
1x 99970101250 O-ring

Click 'Zoom in' for large parts diagram.
Diagram ref no 3, 4, 8 and 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG42402004

The product you are viewing cross references to these numbers

Shift rod stop.



Fits:
Porsche 911 1965-83 Sportomatic
Porsche 914-6 1970-76 SPM

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90530321100

The product you are viewing cross references to these numbers

Shifter crush sleeve for mounting shift knob.



Fits:
Porsche 911/912 1965-86
Porsche 914-6/4 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99953200300

The product you are viewing cross references to these numbers

Short shift kit. Porsche 911 / 914 with 901 or 911 gearbox 1965-72
REDUCED SHIFT BY 30%

Short shift kit for the 901 and 911 gearbox 1965-72
Porsche 911 2.0ltr / 2.2ltr
Porsche 914

Please view PDF for fitting instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100

The product you are viewing cross references to these numbers

Short Shift Kit. Porsche 911 1974-86



Factory style short shift kit for 911 2.7 / SC / 3.2
915 GEARBOX from 1974- 86. REDUCED SHIFT BY 20%, complete with gearshift lever.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100

The product you are viewing cross references to these numbers

Short shift kit.



Factory style short shift kit for 911 2.7 / SC / 3.2
915 GEARBOX from 1974- 86. REDUCED SHIFT BY 20%, complete with gearshift lever.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100

The product you are viewing cross references to these numbers

Short shift kit - track.



Track car short shift kit for 911 2.7/SC/3.2
915 GEARBOX from 1974- 86. REDUCED SHIFT BY 20%, complete with gearshift lever.

Please CLICK HERE for installation instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100W

The product you are viewing cross references to these numbers

Short shift kit. Porsche 911 with 915 gearbox 1974-86
REDUCED SHIFT BY 30%

Short shift kit for the 915 gearbox
Porsche 911 2.7 / SC / 3.2 Carrera from 1974 - 1986.

Please view PDF for fitting instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100

The product you are viewing cross references to these numbers

Short shifter kit. Reduces the shift by around 30%



Fits:
Porsche 911 / 912 / 1965-74

Reduce the length of throws and give the shifter in your 911, 912 or 914 a more solid feel with short throw shift kit. Machined from billet stock, this kit will reduce the throw of your shifts by approximately 30% and provide more precise engagement. Weighted to improve the speed and accuracy of your shifts with a minimal increase in effort, this shift kit provides benefits any driver will appreciate.

Download the detailed  installation instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S98024P196574

The product you are viewing cross references to these numbers

 Short shifter kit (30%)



Fits:
Porsche 911/930/914 1972-86
Porsche 930 Turbo 1975-86
* Will not work with G50 Transmission

Reduce the length of throws and give the shifter in your 911, 912 or 914 a more solid feel with this short throw shift kit. Machined from billet stock, this kit will reduce the throw of your shifts by approximately 30% and provide more precise engagement. Weighted to improve the speed and accuracy of your shifts with a minimal increase in effort, this shift kit provides benefits any driver will appreciate.

Download the detailed installation instructions

Rennline Exactshift Short Shifter. 



Fits:
Porsche 911 Carrera G50 - 1987 to 1989
Porsche 911 turbo - 1989

Product Description

Our new ExactShift chassis mounted short shifter for the 1987-89 Porsche 911 ushers in a whole new level of performance for the G50 gearbox. The OEM shifter lacks adjustability and precision and certainly leaves room on the table for improvement. Our shifter solves these design flaws to allow fine tuning to your specific driving style, both on and/or off the track. All of this wrapped up in an eye catching and aesthetically pleasing design with the level of quality, engineering, and manufacturing you have come to expect from Rennline.

• Constructed from CNC machined aircraft grade billet aluminum
• Extended shift lever positioning shift knob closer to steering wheel for ultimate control
• Return-to-center shift lever action
• Featuring and all metal bushing design for a direct feel
• Mounts directly to transmission tunnel using supplied hardware
• Retains OEM shift coupler and other components for a bolt-in installation
• Available in Black or Silver anodized finish
• Aluminum shift knob included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR26

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 911 1964-72 with 901 gearbox



Fits 911 with the 901 gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-901-

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 911 1972-84 with 915 gearbox



Fits 911 with the 915 gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-915-

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 930 1975-88 with 930 4 speed gearbox



Fits 911 with the 930 4 speed gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Pair with our Shift Knob / Extender is recommended.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-930-

The product you are viewing cross references to these numbers