Specialist Tools

Oil return tube o-ring installer for Porsche 911



With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR027

The product you are viewing cross references to these numbers

901/911/912/915/930 Precision shift coupler for Porsche 911



Our high quality, precisely engineered coupler ends sloppy shifting caused by worn (and even new!) factory couplers. Fabricated to exacting tolerances, the SR010 provides a precision feel and allows for accurate shifting. No more missed shifts during the heat of battle because of a sloppy factory coupler. The SR010 provides the precision and accuracy you demand when down shifting into that high-speed turn. No need to worry whether you are going to hit the wrong gear and over rev your engine. A quick bolt on replacement for the factory part. Shift with confidence, shift with precision. Available for 901/911/912/915/930.

Also available with our Shift Coupler Clamp (SR151) and/or shift bushing set (1 each of the Shift Tube Bushing and the Ball Cup Bushing).

For Installation Instructions please CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR010

The product you are viewing cross references to these numbers

Removal tool injectors filter.



Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968


Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

5167

The product you are viewing cross references to these numbers

Ring wench 36mm Generator nut. Laser Cut and zinc plated.



Fits:
Porsche 356 all
Porsche 912 >>1969

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

T265710002

The product you are viewing cross references to these numbers

Shift coupler clamp for Porsche 911



CNC machined from aerospace alloy, our precision Shift Coupler Clamp ensures that your coupler stays where you set it. With extra clamping power ensured with our unique design, one-handed set-up, and anodized for great looks and protection, our Shift Coupler Clamp will provide that extra confidence you need.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR151

The product you are viewing cross references to these numbers

Spark plug hole repair kit for Porsche 911



Stripped spark plug threads in a 911 head usually means one of two things– a compromised repair or an engine drop to do it properly.

Until now.

STOMSKI RACING's new 911 Spark Plug Hole Repair Kit allows you to either accurately chase the threads of the damaged head, or if necessary, effectuate a complete fix by installing a Time-Sert (or Big-Sert). Our new digitally designed and CNC machined jig mounts over two of the valve cover studs, and when locked down with the included thumb screws, allows Time-Sert reamers, chasers, taps, and setters to be precisely aligned by way of the jig's guide tube and custom tap driver– all while the engine is still in the car.

Available in two different versions:

• SR130 for use with the standard M14x1.25 TimeSert Kit, and Inserts (TS4412E & TS44111) and;

• SR130BS for use with Big-Sert M14x1.25 oversized Insert Kit, and Inserts (TS5141E & TS51407).


We also have Time-Sert/Big-Sert 14x1.25 Kits and Inserts available for the complete package.

Sprocket alignment tool for Porsche 911



Sprocket alignment on the 911 engine requires an accurate and repeatable ability to measure the offset of the sprockets and lay shaft. Simply using a straight edge and vernier calipers requires at least three hands and rarely produces precise measurements. Now, with the SR008, measuring sprocket alignment on the 911 engine has never been simpler, more accurate, or more repeatable. A precisely fabricated block of 6061 aluminum secures an oversized Starrett straight edge (included) to enable easy and exact measurements. No more guessing or settling for "close enough."
Includes custom caliper base, as well as thumb screws for mounting on all 911 engines including the 964.

Sprocket registration pin puller for Porsche 911



This unique tool allows you to easily pull the cam timing sprocket registration pin. No more yanking on the factory tool, hurting your fingers, or pulling the sprocket off the end of the cam shaft. Use this precisely machined slide hammer to delicately pull the pin.

TDC indicator with travel gauge for Porsche 911



For engines where you do not have to use our "dead-stop" TDC Indicator (SR022/23), use our easy to use, highly accurate TDC Indicator With Travel Gauge to measure the exact position of the piston. Precisely manufactured from 6061 Aluminum and hard-coated for extra wear resistance, these indicators include ASME/ANSI certified travel gauges for proven accuracy. Not recommended for use on the hemispherical heads on air-cooled 911s.

Available for either 10mm, 12mm, or 14mm spark plug holes.

Sold separately.

TDC indicators for Porsche 911



To ensure the utmost in timing precision, the true TDC of all engines should be checked to confirm the accuracy of the pulley TDC mark in relation to the real TDC. This tool screws into the spark plug hole and gives a mechanical indication of where the piston is in relation to the pulley/crankshaft. By rotating the crankshaft and touching/bumping the piston against the dead stop BTDC, and then rotating the engine in the opposite direction and touching/bumping the piston again against the dead stop ATDC, recording both measurements on a degree wheel, the pulley, or our DigiDix- SR095, you can calculate pure TDC.

Available for either 12mm or 14mm spark plug holes.

Sold separately.

Through bolt o-ring installer for Porsche 911



Installing O-rings on the through bolts for a 911 engine case often slices the rings on the threads of the bolt, leading to ripped seals at best, or a leaky engine at worst. Use this cap to protect the O-ring and to insure a factory quality seal. Precisely machined from quality brass.

Stomski Racing SR024 Through bolt o-ring installer with sleeve for Porsche 911



Based on the factory P9511 tool, STOMSKI RACING's version of this tool incorporates a brass cap and a double-ended stainless steel sleeve to install the o-rings on the crankcase through-bolts of the 3.6 and later cases (but possibly can be used on some other 911 engines). By using the included brass cap to protect the delicate o-ring from getting cut on the threads of the bolt, you then use the "thin" end of the sleeve to slide the o-ring over the brass cap onto the shank of the through-bolt. Once the o-ring is clear of the threads, remove the SR024 brass cap and flip the SR024 stainless steel sleeve over and use the blunted end to securely and gently seat the o-ring in the recess on the 3.6 case.

Time-sert spark plug M14 x 1.25 deep hole kit

The perfect compliment for our SR130, Time-Sert's M14x1.25 Deep Hole Kit contains a step tap, wrench, seat cutter, and insert driver.

Inserts shown on the image are not included and are sold separately.

Time-Sert™ thread repair kit for SR065/SR067/SR068 for Porsche 911 / Boxster / 996 / 997



For exhaust port studs on 911, Boxster, 996/997 or GT3 heads where the threads have been pulled, or to recover from an already improper repair, we have developed this Time-Sert(tm) kit so you may use our SR065, SR067, SR068 or SR069 tools to insert a Time-Sert and save an otherwise ruined head. In addition to the standard Time-Sert(tm) parts (short P drill, counter-bore, tap, insert tool, and 5 short inserts), our kit also includes a full length P drill, two drill jigs/bushings to guide the P drill and tap in our SR065, SR067, or SR068 fixtures, 5 full length inserts, and 5 studs.

Time-Sert(tm) is a registered trademark of TIME FASTENER COMPANY

Timing chain strap / support for Porsche 911



When assembling the case halves on the 911 engine STOMSKI RACING's SR222 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

Fits
• SR222 for all 911 engines

Transmission selector rod holding plate for Porsche 911



For holding the selector rods when adjusting and tightening the selector forks on the 901/911 (SR260) or the 915 transmissions (SR260A).

Precision CNC machined from extremely stable Delrin to insure accuracy now and after years of use.

Sold separately.