Bonnets / Locks & Latches

Guide tube for bonnet release cable, 1750mm.



Fits:
Porsche 911 2.0-3.3 01/63-07/89


Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150218122

The product you are viewing cross references to these numbers

Handle for bonnet and engine lid cable.

Fits:
Porsche 911 (bonnet and engine lid) 2.0L-3.3L 01/1963-07/1989
Porsche 912 (bonnet and engine lid) 1.6L 01/1965-12/1969
Porsche 914 (engine lid) 1.7L-2.0L 01/1969-02/1976
Porsche 959 (engine lid) 2.8L 01/1986-04/1991
Porsche 964 (engine lid) 3.3L-3.6L 12/1988-06/1994
Porsche 968 (engine lid) 3.0L 06/1991-11/1995

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155281320

The product you are viewing cross references to these numbers

Hex Bolt M6 X 16 For Lid Lock.

The Hex Bolt M6 x 16 for Lid Lock is an OEM-spec fastening bolt designed for securing the lid lock / latch mechanism on Porsche 911 models. This M6 bolt features a 16mm length and is used to mount or retain components of the lid locking system, ensuring correct alignment, secure fastening, and reliable locking operation.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram Ref No 16

Fasteners like this are critical to maintaining proper function of bonnet, boot, or engine lid locking assemblies, where consistent clamping force and vibration resistance are essential. Over time, lid lock bolts can become corroded, stripped, missing, or damaged during repairs—making replacement necessary to restore proper latch security.

This bolt is manufactured to factory specification for correct thread pitch, fitment, and strength, making it a dependable replacement for maintenance, repair, or restoration work.

What This Product Does:

• Secures the lid lock / latch mechanism in place
• Maintains correct lock alignment for smooth opening and closing
• Prevents loosening from vibration over time
• Supports safe and reliable lid locking function
• Ensures OEM-correct fastening during repairs or replacement

Symptoms Of A Missing Or Failed Bolt:

• Loose or rattling lid lock assembly
• Misaligned latch or difficulty closing the lid
• Lid not latching securely
• Missing fastener after repair work
• Rusted, seized, or stripped bolt threads
• Visible movement in the locking mechanism

Why Replacement Matters:

• Keeps the lid lock firmly mounted and correctly aligned
• Helps ensure the lid/bonnet closes securely and safely
• Prevents premature wear of the latch mechanism
• Restores factory-correct fastening and fitment
• Supports safe vehicle operation and prevents unexpected lid release

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG07505702

The product you are viewing cross references to these numbers

Inner frame structure bonnet. 

Fits:
Porsche 911 - 1965 to 1973

Front hood inner frame structure in steel

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151101020

The product you are viewing cross references to these numbers

Front Hood (Bonnet) Catch / Latch. Upper part.
OE Match replacement upper latch assembly that secures the front bonnet (hood) on early Porsche 911 models (1965–1973). This latch engages with the bonnet striker to hold the hood firmly closed and works in conjunction with the lower latch and release cable to provide safe, reliable operation.

Fits:
Porsche 911 1965 - 1973

Diagram ref no 10

The upper latch serves as a secondary locking point for the front bonnet, helping keep it tightly sealed against wind, vibration, and road forces while driving. Its geometry and pivot action are designed to work seamlessly with the factory release mechanism, striker pin, and lower catch system for smooth opening and secure closure.

This OE Match version is ideal for classic restoration projects, rebuilds, or whenever the original latch has worn, bent, corroded, or no longer provides positive engagement.

The upper latch engages the bonnet’s striker when the hood is closed, providing a secure secondary lock that prevents the bonnet from lifting or rattling while driving. It also supports proper hood alignment and seals the front bodywork for aerodynamic smoothness and weather protection.

Function: Installed at the upper front mounting location of the bonnet closure system, this latch acts as part of a two-point capture system that holds the front hood closed. It retains the striker securely and releases smoothly when the interior release cable is actuated. Proper latch function ensures:
•  Secure hood retention while driving
•  Smooth, predictable operation of the release mechanism
•  Even hood alignment and gap control
•  Reduced vibration and wind noise

The bonnet latch is a critical safety and structural component of the front body closure system. A worn, bent, or corroded latch can result in poor hood engagement, hood movement or rattle, misalignment of gaps, or - in worst cases - unintentional bonnet opening at speed. Replacing an aged or compromised latch with an OE Match unit helps ensure secure closure, factory-correct alignment, and dependable release performance.

When to replace:
•  Hood does not close or lock securely
•  Clamshell alignment issues or uneven gaps
•  Hood rattles or lifts under wind load
•  Latch shows signs of wear, corrosion, or binding
•  During restoration, body panel work, or release cable service

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151105121

The product you are viewing cross references to these numbers

Latch on front bonnet. Upper part.

Fits:
Porsche 911 1965-73

Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151105121

The product you are viewing cross references to these numbers

Lock on front bonnet. Lower part.



Fits:
Porsche 911 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151105220

The product you are viewing cross references to these numbers

Repair panel for boot floor plate at VIN.

Fits:
Porsche 911 2.4L-3.3L 08/1971-07/1989

* Front part of item 7 on the diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150103522

The product you are viewing cross references to these numbers

Rubber Bonnet/Boot Hooks. LARGE (Set of 2).

It is the little touches that make a project, so whether you are doing a backdate, replica, restomod or tribute car you want the details to be correct. Complete the front of your car with these RSR Replica Rubber Bonnet Hooks; not only do they look the part but they shave complexity and weight just like the factory versions. A perfect complement for any build, these Bonnet Hooks will make sure when people see you coming they know you have paid attention to every facet of your build.

Short Hood to Long Hood Conversion.

Fits:
Porsche 911 1974 - 1989
Porsche 964

This is a steel extension developed to extend an impact bumper bonnet to the earlier long hood style. No modification to the impact bumper lock panel is required. The extension is manufactured from steel that is the same thickness as original bonnets, for ease of welding. Includes the reinforcement skin that is fitted from underneath the bonnet.

We also sell the bumper fill panels to cover the void between early bumpers and the later lock panel, and extended latches to make it easier to open the hood.

Spacer bush for Hood release cable handle.



Fits:
Porsche 911 1987-89 
option code: M637 (Club Sport "CS")

Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151161700

The product you are viewing cross references to these numbers

Rennline's billet T-handle pulls are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory pulls become weak, cracked, and/or unsightly after years of use and exposure to UV light. Rennline billet T-handles are machined from 6061 aluminum and black anodized for a durable, long lasting appearance. Simply unscrew your old pull and screw ours on.



Fits:
Porsche 911/912/930 (1965-1989)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I54

The product you are viewing cross references to these numbers

Vin / Chassis Number Panel Repair Section Porsche 911 1965-81. Weld in panel

Fits:
Porsche 911 1965-81

* Front part of item 7 on the diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911501099

The product you are viewing cross references to these numbers

Vin / Chassis Number Panel Repair Section Porsche 911 1982-89. Weld in panel



Fits:
Porsche 911 1982 -89

* Front part of item 7 on the diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050109800

The product you are viewing cross references to these numbers