Batteries & Chargers

Gearbox Ground Strap.



Fits:
Porsche 911 - 1970 to 1989

Porsche 911 turbo - 1975 to 1989
Porsche 964 - 1989 to 1994 Manual Transmission
Porsche 993 - 1994 to 1998 Manual Transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99961192020

The product you are viewing cross references to these numbers

Lightweight lithium 20Ah (60Ah PbEq) Touge 500 battery.
Only 3.8 kg

PbEq: (LeadEquivalent) is to help you choose the correct Capacity for your vehicle.
As a rule of thumb, we recommend that the capacity in Ah (PbEq) of our battery should be at least the same or greater than your OEM battery

This battery has a 650 CCA (Cold Cranking Amps) rating

Fits
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995

Save over 17kgs with the Touge 500 battery using the Latest Lithium Iron Phosphate (LiFePO4) Battery Technology.

The focus here is to better the performance of a lead-acid battery at a fraction of the weight.

• Only 3.8 kg (Typical OEM lead acid batteries weigh between 15kgs to 27kgs)
• Capacity - 60Ah (PbEq)
• Crank - 650 CCA
• Nominal Voltage - 12.8 Volts
• Dimensions - 240 x 175 x 190mm

Product Information
• 2 year limited warranty
• Suitable for up to 5.0L and 8 cylinder engines
• Developed in the UK
• Built using high tech a123 battery cells from the US
• Tested on road and track
• OEM style fitment on many cars
• UK Motorsport Association (MSA) approved for racing

Please note: due to logistic restrictions, we are only able to deliver batteries within United Kingdom and Netherlands

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

650CCA

The product you are viewing cross references to these numbers

Positive battery terminal clamp.



Fits:
Porsche 911 (1974-1989)
Porsche 930 (1976-1989)

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161189804

The product you are viewing cross references to these numbers

Fits:
Porsche 911 / 930 / 912 / 996 / 997 / Boxster / Cayman / 991
** except 1969-73

This unit is designed to work with the Odyssey 925 lightweight battery. Other batteries of similar size may also fit, see our battery section for more details.
Note: Switch, remote pull, and battery are not included with this or any of the kits.

Rennline Battery Relocation Kit with Kill Switch Mount (Without Kill Switch - available separately)

To be fitted with 925 Odyssey Battery



Fits:
Porsche 911 LHD Only

Relocating a lightweight battery to the smugglers box is a standard modification to track and high-performance street 911's. The stock 911 battery is much heavier than necessary (upward of 40 pounds heavier than an Odyssey 680), and is located in the front left of the car, where it contributes to poor weight distribution. Until now, relocating a battery to the smugglers box (the smugglers box is the small compartment in the front trunk behind the fuel tank, on the passenger's side) required fabricating your own mounting and bracket system. Rennline's new relocation kit is a fully adjustable aluminum assembly that makes battery relocation an easy afternoon project. This newly designed unit is a complete bolt in assembly which requires absolutely no drilling and fully suspends the battery eliminating unwanted vibration. Kit includes all necessary stainless steel hardware and full installation instructions. We also offer an optional Smugglers Box Lid that is a perfect location to mount a cut off switch.

Note: Switch, remote pull, smugglers box cover, and battery are not included with this or any of the kits.

Note: Pictures may not show actual product.

Rennline Battery Relocation Kit with Kill Switch Mount (Without Kill Switch - available separately)

To be fitted with 680 Odyssey Battery



Fits:
Porsche 911 LHD Only

Relocating a lightweight battery to the smugglers box is a standard modification to track and high-performance street 911's. The stock 911 battery is much heavier than necessary (upward of 40 pounds heavier than an Odyssey 680), and is located in the front left of the car, where it contributes to poor weight distribution. Until now, relocating a battery to the smugglers box (the smugglers box is the small compartment in the front trunk behind the fuel tank, on the passenger's side) required fabricating your own mounting and bracket system. Rennline's new relocation kit is a fully adjustable aluminum assembly that makes battery relocation an easy afternoon project. This newly designed unit is a complete bolt in assembly which requires absolutely no drilling and fully suspends the battery eliminating unwanted vibration. Kit includes all necessary stainless steel hardware and full installation instructions. We also offer an optional Smugglers Box Lid that is a perfect location to mount a cut off switch.

Note: Switch, remote pull, smugglers box cover, and battery are not included with this or any of the kits.

Note: Pictures may not show actual product.

Rennline Battery Relocation Kit without Kill Switch Mount

To be fitted with 925 Odyssey Battery



Fits:
Porsche 911 LHD Only

Relocating a lightweight battery to the smugglers box is a standard modification to track and high-performance street 911's. The stock 911 battery is much heavier than necessary (upward of 40 pounds heavier than an Odyssey 680), and is located in the front left of the car, where it contributes to poor weight distribution. Until now, relocating a battery to the smugglers box (the smugglers box is the small compartment in the front trunk behind the fuel tank, on the passenger's side) required fabricating your own mounting and bracket system. Rennline's new relocation kit is a fully adjustable aluminum assembly that makes battery relocation an easy afternoon project. This newly designed unit is a complete bolt in assembly which requires absolutely no drilling and fully suspends the battery eliminating unwanted vibration. Kit includes all necessary stainless steel hardware and full installation instructions. We also offer an optional Smugglers Box Lid that is a perfect location to mount a cut off switch.

Note: Switch, remote pull, smugglers box cover, and battery are not included with this or any of the kits.

Note: Pictures may not show actual product.

Rennline Battery Relocation Kit without Kill Switch Mount

To be fitted with 680 Odyssey Battery



Fits:
Porsche 911 LHD Only

Relocating a lightweight battery to the smugglers box is a standard modification to track and high-performance street 911's. The stock 911 battery is much heavier than necessary (upward of 40 pounds heavier than an Odyssey 680), and is located in the front left of the car, where it contributes to poor weight distribution. Until now, relocating a battery to the smugglers box (the smugglers box is the small compartment in the front trunk behind the fuel tank, on the passenger's side) required fabricating your own mounting and bracket system. Rennline's new relocation kit is a fully adjustable aluminum assembly that makes battery relocation an easy afternoon project. This newly designed unit is a complete bolt in assembly which requires absolutely no drilling and fully suspends the battery eliminating unwanted vibration. Kit includes all necessary stainless steel hardware and full installation instructions. We also offer an optional Smugglers Box Lid that is a perfect location to mount a cut off switch.

Note: Switch, remote pull, smugglers box cover, and battery are not included with this or any of the kits.

Note: Pictures may not show actual product.

Rennline Kill Switch Mount.
You may also need the pull cable EL21 Works with all Rennline kill switches EL61

  

Fits:
Porsche 911
Porsche 964
Porsche 993

This kill switch mount is specifically designed to attach to the inner fender bolts on all 1965-98 911’s. We have also added extra mounting holes that will allow this bracket to be used in many universal applications. It accepts most standard kill switches and up to 2 remotes pulls that are required in any organized race environment. Constructed from anodized aluminum and TIG welded to create a bullet proof design. Kill switch and remote pulls are sold separately.

Note: Pictures may not show actual product.

Wing nut for ground strap to body.



Fits:
Porsche 911 (1969-1977)
Porsche 930 (1976-1977)

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99904400103

The product you are viewing cross references to these numbers

Wing nut for ground strap to body.



Fits:
Porsche 911 (1974-1977)
Porsche 930 (1976-1977)

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99904400103

The product you are viewing cross references to these numbers