coolant thermostat housing with thermostat Genuine Porsche part 99610601361

Radiator water transmission.



Fits:
Porsche 996 Turbo / GT2 1998-05
Porsche 997 GT2 / GT2 RS 2008-11
Porsche 997 GT3 3.6L 2007-09
Porsche 997 GT3 / GT3 RS 3.8L 2010-11
Porsche 997 GT3 RS 4.0L 2011

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610603775

The product you are viewing cross references to these numbers

Water pump with gasket.



Fits:
Porsche Boxster 1997-04
Porsche 996 C2/4 1997-04

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610601157

The product you are viewing cross references to these numbers

Water pump.
The Genuine Porsche 99610601177 is the factory-specified water pump designed for high-performance Porsche 996 and 997 variants (Turbo, GT2, GT3, GT3 RS).  circulates coolant through the engine block and radiator, maintaining optimal engine temperature under both normal and demanding driving conditions.

Fits:
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 GT3 RS 2002 - 2005

Diagram ref no 2

NOTE: Water Pumps DO NOT COME WITH MOUNTING GASKETS.
Please add the gaskets listed below Part No. 99610634071

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610601177

The product you are viewing cross references to these numbers

Water thermostat housing with thermostat insert and gasket.
Standard temperature 83 °C



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2 / C4
Porsche 987 Boxster / Boxster S 2005-08
Porsche 987C Cayman / Cayman S 2006-08
Porsche 997 Carrera / S 2005-08 (Coupe / Cabrio)

This product supersedes Porsche's old part numbers:
- 99610612153, 99610612155, 99610601359, 

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610601361

The product you are viewing cross references to these numbers

160F Low Temperature Thermostat HOUSING WITH INSERT & Gasket for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610601361

The product you are viewing cross references to these numbers

IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01

Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005

Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L

**M96 Engine only 

Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!

Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.

IMS Intermediate Shaft Bearing Upgrade – EPS Eternal Fix (M96 / Early M97.01) Prevent future IMS-related engine damage with the EPS Eternal Fix for the well-known Porsche IMS bearing issue. Unlike common ball-bearing upgrades, EPS uses a patented cylindrical roller bearing with thrust control, engineered to separate axial (thrust) loads from radial (running) loads for long-term durability.

What makes EPS different?

Many bearing upgrades can be compromised when thrust loads act on the bearing rollers. EPS’s patented design ensures the rollers carry radial load only, while the axial load is carried around the full perimeter of the outer race. This reduces overload conditions and delivers a solution engineered to last the life of the engine. 

Key benefits

Patented cylindrical bearing with thrust control (not a ball-bearing solution)

In-car installation: designed to be pressed into the rear of the engine without engine disassembly EPS states significantly increased load capacity vs typical ball-bearing upgrades (often quoted as up to 12x)

Backed by an EPS 5-year warranty

Recommended to install alongside the Rear Main (#8) Seal and Housing

Important fitment note (997 3.8L M97.01) Engine numbers up to M97/01 68509790 use the older IMS bearing (fits). Engine number M97/01 68509791 onwards has the larger revised IMS (does not fit). Please verify engine number before ordering.

For More Information CLICK HERE

For Installation Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610590102EPS

The product you are viewing cross references to these numbers

Racing and high performance radiators for all Porsche models make a great performance upgrade as well as an incredibly durable and reliable OE replacement.

Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 996 C2
Porsche 996 C4
Porsche 996 C4S
Porsche GT3

Cross reference numbers:
8MK376716651 , 99610603751, 99610603750, 99610603752, 99610603753

CSF strives to build and engineer the most advanced, efficient, and reliable cooling systems in the world. All-aluminium 100% TIG welded, CNC machined brackets, mounting pins and "Quick-Connect" inlet/outlet pipes, Drop-in fit requiring no modifications , 2 row core with B-Tube technology (+20%), 1 hour hand polished, Track Tested & Proven in 110°F, ISO 9001 certified cooling system manufacture.

ENGINEERING
"B-Tube" Technology - Most efficient tube in the world
High Efficiency Louvered Fin
OE radial and deep drawn aluminium end tanks
Wind tunnel tested for optimal radiator core cooling performance
Stronger joint design for mountings, fan shrouds & condensers
OE Specific Mounting
"Drop-in" fitment requiring no modifications
CNC Machined brackets and fittings
Racing Style all-aluminium drain plug

MANUFACTURING
Brazed in CAB Furnace
ISO 9001/9002 certification
Privately owned factories with full "In house" tool rooms
"Master Class" TIG welding

TESTING
Individually leak tested
Vibration cycle tested
Thermal cycle tested
Burst pressure cycle tested 10,000 times for strength
Salt spray tested for corrosion protection


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7057

The product you are viewing cross references to these numbers

Racing and high performance radiators for all Porsche models make a great performance upgrade as well as an incredibly durable and reliable OE replacement.

Fits:
Porsche 996 Turbo
Porsche GT2
Porsche 997 GT2 / GT2 RS 2008-11
Porsche 997 GT3 3.6L 2007-09
Porsche 997 GT3 / GT3 RS 3.8L 2010-11
Porsche 997 GT3 RS 4.0L 2011

Cross reference numbers
99610603775, 99610603773, 99610603772, 99610603771, 50595, 8MK376765111

CSF strives to build and engineer the most advanced, efficient, and reliable cooling systems in the world. All-aluminium 100% TIG welded, CNC machined brackets, mounting pins and "Quick-Connect" inlet/outlet pipes, Drop-in fit requiring no modifications , 2 row core with B-Tube technology (+20%), 1 hour hand polished, Track Tested & Proven in 110°F, ISO 9001 certified cooling system manufacture.

ENGINEERING
"B-Tube" Technology - Most efficient tube in the world
High Efficiency Louvered Fin
OE radial and deep drawn aluminium end tanks
Wind tunnel tested for optimal radiator core cooling performance
Stronger joint design for mountings, fan shrouds & condensers
OE Specific Mounting
"Drop-in" fitment requiring no modifications
CNC Machined brackets and fittings
Racing Style all-aluminium drain plug

MANUFACTURING
Brazed in CAB Furnace
ISO 9001/9002 certification
Privately owned factories with full "In house" tool rooms
"Master Class" TIG welding

TESTING
Individually leak tested
Vibration cycle tested
Thermal cycle tested
Burst pressure cycle tested 10,000 times for strength
Salt spray tested for corrosion protection

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7053

The product you are viewing cross references to these numbers