1 set of brake pads for disc brakes, This part number supersedes to 99135294603 Genuine Porsche part 99135294601

Brake pads set of 4 for one axle


Porsche 718 Boxster (982)  non Ceramic brakes
Porsche 718 Cayman (982) non Ceramic brakes

Porsche 911 3.4L (991)
Porsche 911 3.4L Convertible (991)
Porsche 911 3.4L Targa (991)

Porsche Boxster Spyder (981)

Porsche Cayenne (9YA) Cars with black/green or silver calipers
Porsche Cayenne Coupe (9YB) Cars with black/green or silver calipers

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135293904

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle


Porsche 991 S 3.8L
Porsche 991.2 3.0L
Porsche 991.2 S 3.0L

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135294904

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle
for cars without ceramic brake disc


Porsche Cayman GT4 Rear

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98135294882

The product you are viewing cross references to these numbers

Brake Pads Rear.




I450 - For cars with Ceramic Brake PCCB
Porsche 991.2 Carrera 2017>>
Porsche 991.1 Turbo 2014-16
Porsche 991.2 Turbo 2017>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135294603

The product you are viewing cross references to these numbers

Brake pads set of 4 for one axle .


Porsche 991 S 3.8L
Porsche 991.2 3.0L
Porsche 991.2 S 3.0L

Porsche 992.1 C2 S

Porsche 992.1 C4 S

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135294904BRE

The product you are viewing cross references to these numbers

EBC Blue brake pads NDX RACE.
Sold as set of 4 pads for one axle.




Porsche 991 Carrera S 3.8 2011-2015 (Cast Iron Disc Only)
Porsche 991 Carrera 4S 3.8 2011-2015 (Cast Iron Disc Only)
Porsche 991 Carrera 4S Targa 3.8 2014-2015 (Cast Iron Disc Only)
Porsche 991 Carrera GTS 3.8 2014-2015 (Cast Iron Disc Only)
Porsche 991 Carrera 4 GTS 3.8 2014-2015 (Cast Iron Disc Only)

Porsche 970 Panamera 3.0 Supercharged HYBRID 2011-16 (Cast Iron Discs only)
Porsche 970 Panamera 3.0 Twin Turbo 2013-16 (Cast Iron Discs only)
Porsche 970 Panamera 3.6 2010-16 (Cast Iron Discs only)
Porsche 970 Panamera 4.8 2009-13 (Cast Iron Discs only)
Porsche 970 Panamera 4.8 GTS 2012-16 (Cast Iron Discs only)
Porsche 970 Panamera 4.8 Twin Turbo 2009-16 (Cast Iron Discs only)
Porsche 970 Panamera 3.0 TD 2011-163 (Cast Iron Discs only)
Porsche 971 Panamera (2nd Gen) 2.9 Twin Turbo 2016>> (Cast Iron Discs only)
Porsche 971 Panamera (2nd Gen) 2.9 Twin Turbo E-Hybrid (PR-1LN) 2016>> (Cast Iron Discs only)

Porsche 971 Panamera (2nd Gen) 3.0 Turbo 2016>> (Cast Iron Discs only)
Porsche 971 Panamera (2nd Gen) 4.0 Twin Turbo 2016>> (Cast Iron Discs only)
Porsche 971 Panamera (2nd Gen) 4.0 Twin Turbo 2019>> (Cast Iron Discs only)
Porsche 971 Panamera (2nd Gen) 4.0 Twin Turbo Diesel 2016-2017 (Cast Iron Discs only)

EBC Bluestuff NDX
Super-Street & Trackday Brake Pads

Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.

Product Information

When we say "Trackday" don't underestimate this fantastic material.

The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.

Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.

The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.

Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.

Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.

Performance



EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.

Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.

There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.

Bedding Performance

The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.

This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.

Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.

More information

Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.

Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.

Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.

Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DP51858NDX

The product you are viewing cross references to these numbers

EBC RED Brake Pads 'ROAD'
Sold as set of 4 pads for one axle.




PORSCHE 991.2 3.0 Twin Turbo C2 / C4 / C4 Targa 2015>> (Cast Iron Disc Only) (Front)
PORSCHE 991.2 3.0 Twin Turbo Carrera GTS / 4 GTS / 4 GTS Targa 2017>> (Cast Iron Disc Only) (Front)
PORSCHE 982 Boxster (718) S 2.5 Turbo 2016>> (Cast Iron Disc Only) (Front)
PORSCHE 982 Cayman (718) S 2.5 Turbo 2016>> (Cast Iron Disc Only) (Front)

EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.

Product Information

High friction formula improves brake effect 15%.

Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.

✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install

Performance



High Performance lowest dust rating pads for Prestige imports and faster street driving.

There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.

This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.

Technical Info:

Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.

It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DP32307C

The product you are viewing cross references to these numbers