do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
coil spring 1 pair of springs Genuine Porsche part 98134398006504
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Fits:
Porsche 981 Boxster Spyder - 2016
KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.
When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.
With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.
KW Height Adjustable Spring Kit
Max Weight - F: - 785 R: - 955
Lowering Front(mm) - 5 -25
Lowering Rear(mm) - ca. 15
Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)
Product Features:
- Improved steering behaviour and response
- Compatible with OEM dampers
- Adjust ride height even when springs are installed
- Manufactured in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
25371057
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche 981 Boxster / S 2012-16 - In conjunction with PR X73*
Porsche 981 Cayman / S 2014-16 - In conjunction with PR X73*
Porsche 981 Boxster Spyder 2016
*PR X73 - Sports chassis -20mm, without PASM
Diagram ref. 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98134398006504
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS 3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.
2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.
R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.
The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO038R1
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS 3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type
The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.
3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.
The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.
Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO038R3
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS 3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016
Nitron elec-TRON R1 Kit
The elec-TRON R1 coilover kit utilises the Nitron proportional solenoid valve with all of the damping control being carried out by the control system. This kit includes our adjustable top mounts and uses our race springs, giving you the ultimate adjustment for a perfect geometry setup.
Please note: This kit is compatible with the Porsche PASM system, so no additional products are required.
BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation.
Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.
Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO038ER1
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS 3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016
Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only
Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.
Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO038ER3
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed