This part number supersedes to 93034702504 Genuine Porsche part 93034702502

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Fits:
Porsche 930 3.0L, 3.3L 1975-89

Please note: Reconditioned Alternators are sold on an exchange basis, A surcharge of £1000.00 will be held and then refunded when the old one is returned.

The most common power steering faults are:
- Leaking power steering
- Torn Gators
- Hard to steering when idling
- Hard to steering one-way
- Steering-Wheel not self-centering
- Noise when Idling
- Noise when steering
- Judders when steering
- Loss of all power in steering
- Semi-Loss of power in steering
- Electric steering problems

Above are just some of the problems our customers are faced with on a day-to-day basis with their power steering units. We can replace your old unit with a Reconditioned unit. If we don't have a replacement available, we can take in your own unit and recondition it for you. Where a new unit can cost £100's we can recondition/supply reconditioned units at a fraction of this price!

All reconditioned racks come with 1 Year or 12,000 miles warranty!!

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034701000

The product you are viewing cross references to these numbers

Steering U Joint.
Sold each - 2 required per car

Fits:
Porsche 911 1970-89
Porsche 930 Turbo 1975-89

Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034702504

The product you are viewing cross references to these numbers

"A MUST-HAVE ITEM FOR LOWERED CARS"

Fits 911's (69-89), all 930's, 914's, and 912's equipped with Turbo Tie Rods.

Allows Tie Rods to be adjusted downward in extra precise 1/32" (1mm) increments, taking advantage of a wider adjustment range than other kits on the market. Utilizes one of the highest quality alloy steel spherical rod ends available. Teflon/kevlar lined, full length body, and capable of 30 degrees misalignment, so there is no binding throughout suspension travel or when the car is raised off the ground.

14mm "tapered fit" 12.9 grade central shaft wedges itself into the steering arm just like the factory

Porsche tie rod ends, providing superior strength where it is needed. No drilling of the steering arm is required.

Beware of the "other" kits using inadequate 7/16" bolts.

Machined stainless steel spacers.

Castle nuts with cotter pins for safety and added confidence.

Full encapsulating weather/dust seals are an option with this kit to provide extra protection against the dirty driving conditions both under the car and behind the front wheels.

***Required when using struts with raised spindles.

Fits 911/912/930/914
Equipped with Turbo Tie Rods

Price is for a kit which fits both left & right side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSRBSK001

The product you are viewing cross references to these numbers

Track rod upgrade Kit.
Price is for a kit which fits both left & right side.



Fits
Porsche 911 2.7/SC/3.2 1974-89
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The original factory 911 1974-89 tie rods use rubber dampers which can make steering feel spongy, especially with age. Upgrading to 911 Turbo tie rods will give your car firmer and more responsive steering. Installation is a straight-forward process, and can typically be performed in an afternoon.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Steering Shaft for LHD Cars. Left hand drive.

Fits:
For LHD Cars only
Porsche 911 1969-89
Porsche 911 (930) 1975-89

Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134721102

The product you are viewing cross references to these numbers