Please wait…

Please wait while we process your order,
do not press the back button…

Engine cover Genuine Porsche part 93010685113

Code: 93010685113

Genuine Porsche part

Engine cover

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

Engine cover, Left. Porsche 911 1984-89

93010686103

Product Information

Engine cover, Left.
This genuine Porsche left engine cover is manufactured to original Porsche engineering standards and specifications. It ensures proper engine compartment structure, airflow, and protection.

Fits:
Porsche 911 Carrera (1984 to 1989) with engine code 930.20

Diagram Ref No 5.

The engine cover helps protect internal engine components from debris, moisture, and excessive heat exposure while supporting proper airflow throughout the engine bay. As a factory-engineered part, it maintains the original balance of protection, cooling efficiency, and engine bay integrity.

Function:
• Shields engine components from contaminants and heat damage
• Preserves proper airflow and thermal regulation
• Maintains original engine bay layout and structure
• Supports engine longevity and factory-correct operation

A damaged or deteriorated engine cover can compromise airflow, expose engine components to debris, and detract from factory originality. Replacing it with a genuine Porsche OE part ensures proper fitment, correct materials, and long-term reliability, while preserving the vehicle’s authenticity and value.

When to replace:
• Cracked, warped, or heat-damaged cover
• Broken or missing mounting points
• Incorrect or non-original replacement installed
• During factory-correct restoration projects
• When restoring proper engine bay airflow and protection

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010686103

93010686103

The product you are viewing cross references to these numbers

Engine cover. Porsche 911 1984-89

93010686201

Product Information

Engine cover - RIGHT
Genuine Porsche right-side engine cover panel (also known as engine tinware or air duct cover) designed for use in the Porsche 911 Carrera 3.2 produced from 1984 to 1989. This is a factory-original Porsche part manufactured to strict OEM standards for exact fit, form, and finish.

Fits:
Porsche 911 Carrera 3.2L 1984 - 1989

Diagram Ref No 7.

The right engine cover panel does more than just close off a section of the engine bay - it helps direct airflow where Porsche engineered it to go. On air-cooled engines like the 3.2 Carrera, airflow management is critical to maintaining cooling efficiency and proper engine temperatures. This cover works in conjunction with other engine tinware pieces to guide air and protect internal components, contributing to reliable engine operation and longevity.

Over time, engine tinware panels on air-cooled 911s can suffer from corrosion, dents, or deformation, particularly during engine removal, exposure to moisture, or prolonged heat cycling. A compromised engine cover panel can:
• Disrupt airflow management, reducing cooling efficiency.
•  Allow hot air recirculation, potentially contributing to elevated engine temperatures.
•  Reduce fit and finish, leading to rattles or gaps in the engine bay tinwork.

Installing a genuine Porsche replacement panel restores the intended airflow paths, maintains correct sealing against heat and debris, and preserves the classic engine bay’s appearance and function.

When to replace. Replace this engine cover when:
•   The original cover is corroded, dented, or bent.
•   Cooling airflow behaviour changes or there are signs of heat soak.
•   The panel was damaged or removed during engine work or restoration.
•   You’re performing a complete engine tinware refresh.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010686201

93010686201

The product you are viewing cross references to these numbers

Engine cover, Left. Porsche 911 1984-89

93010686103/1

Product Information

Engine cover, Left.
OE Match replacement engine bay cover panel designed for Porsche 911 models from 1984 to 1989. It helps preserve the integrity of surrounding parts and contributes to the overall longevity of your engine compartment. Ideal for restorations, preventative maintenance, or replacement of damaged or aging original covers, this part installs without modification and meets original equipment standards.

Fits:
Porsche 911 Carrera (1984 to 1989) with engine code 930.20

Diagram ref no 5.

The engine cover helps shield engine components from debris, heat exposure, and external contaminants while maintaining the correct airflow within the engine bay. It also contributes to noise control and structural completeness, keeping the engine compartment operating as intended by Porsche.

Function:
• Protects sensitive engine components from dirt, moisture, and heat
• Maintains proper engine bay airflow and thermal balance
• Restores factory-correct fit and appearance
• Supports long-term engine reliability and cleanliness

Over time, engine covers can crack, warp, or degrade due to constant heat cycles and age. Replacing a worn or damaged engine cover helps protect vital engine components, restores proper airflow management, and maintains the original engine bay layout. Using an OE Match part ensures correct fitment and avoids alignment or clearance issues common with poorly matched alternatives.

When to replace:
• Visible cracks, warping, or broken mounting points
• Excessive heat damage or brittleness
• Missing or improperly fitted original cover
• During engine bay restoration or refresh
• When replacing adjacent engine bay components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010686103

93010686103

The product you are viewing cross references to these numbers

Engine tinware, Rear. Porsche 930 3.0L 1975-78

93010685100/1

Product Information

Engine tinware, Rear.
This rear engine cover fits the rear of the engine compartment on Porsche 911 Turbo (930) 3.0L models. It is designed to match the original shape, mounting points and seal, ensuring correct fitment.

Fits:
Porsche 911 Turbo 3.0L 1975 - 1978

Diagram ref no 15

This rear engine tinware panel is part of the engine cooling and sealing system on the 930. It forms a barrier between the engine and the surrounding bodywork so cooling air is directed where it’s needed, while also helping reduce hot-air recirculation and protecting the engine bay from road debris. Manufactured to replicate OE dimensions, it installs in the factory location and aligns with original fixings for a proper, restoration-correct fit.

It helps channel and control airflow around the engine so the cooling system works efficiently, especially under load and high temperatures. It also closes gaps around the rear of the engine bay to keep unwanted heat and dirt from circulating back into critical areas.

Engine tinware can become bent, corroded, or poorly sealed after decades of heat cycles and engine work. Damaged or missing tinware can compromise airflow management, encourage hot-air recirculation, and reduce cooling efficiency - especially important on turbocharged models. Replacing with an OE Match panel restores correct coverage and fit.

When to replace:
• Tinware is cracked, corroded, or bent
•  Gaps visible around the panel or poor sealing coverage
•  After engine removal/refit when panels are damaged or missing
•  During restoration or engine bay refurbishment
•  Signs of excessive dirt ingress or heat-related issues in the engine bay

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010685100

93010685100

The product you are viewing cross references to these numbers

Engine cover, Right. Porsche 911 1984-89

93010686201/1

Product Information

Engine cover - RIGHT
Right-hand engine cover panel (often referred to as engine tinware / engine cover plate). It’s a direct-fit metal cover used in the engine bay area to correctly close and guide airflow as Porsche intended on the 911 Carrera 3.2 (1984–1989).

Fits:
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50

Diagram Ref No 7.

This OE Match Engine Cover (Right) is manufactured to match the original Porsche panel’s shape, mounting points, and fit. On air-cooled 911s, engine cover/tin panels are essential for maintaining correct airflow management around the engine and cooling system - helping separate hot and cool air paths and supporting efficient cooling and stable operating temperatures.

Engine tinware panels often corrode, crack, or get bent during engine work. Missing or damaged covers can reduce airflow efficiency and allow unwanted hot-air recirculation, which may contribute to higher operating temps. Replacing the right-side cover helps restore factory-style airflow control and a tidy, properly sealed engine bay.

When to replace:
• Panel is rusted, cracked, bent, or poorly fitting
• Engine bay tinware is incomplete after repairs/restoration
• You’re addressing cooling efficiency issues linked to missing/damaged ducting
• During engine-out service when access is easiest

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010686201

93010686201

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Engine cover Genuine Porsche part 93010685113