Original Porsche Part Genuine Porsche part 91151133101

Replacement front lid damper, Stops the lid falling. Hood lift supports—also known as gas struts—are pressurized cylinders that help hold your vehicle’s hood open safely. Over time, these supports can weaken as internal pressure drops. Exposure to extreme temperatures, dust, and other contaminants can accelerate wear. Cold weather is especially tough on gas struts, often reducing internal pressure and causing the hood to feel heavier or difficult to keep open.



Fits:
Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)

Signs Your Hood Lift Support Is Failing

• The hood feels heavier or no longer stays open as high as it used to, often due to internal gas leakage.
• Visible grease or oil leaking from the lift supports.
• Creaking, squeaking, or seeping noises when raising the hood or trunk.
• The hood or trunk no longer stays open on its own after lifting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151133100

The product you are viewing cross references to these numbers

Stabilus front bonnet damper.

 

Original Equipment Manufacture

Fits:
Porsche 911 1974-89 STD 430N

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151133100

The product you are viewing cross references to these numbers

Rennline Fully Mechanical Hood Strut, Black. Porsche 911/912/930



How many times have you replaced your hood struts? Us too… that's why we developed the fully mechanical hood strut. The last hood strut that you will ever need. Factory hood struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket hoods, or hoods with bodywork.

Operation is simple. Just open your hood all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood strut will not fail for the life of the product, and therefore carries a lifetime warranty. It utilizes a billet design with complex machining to ensure a smooth and reliable operation.

It's available with either a carbon fibre body or a black aluminum body to suit your style.

For cars with steel hoods, we recommend two struts as the factory hinges flex when only 1 strut is used.
For aluminum or carbon fibre hoods, only one strut is required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E187BLACK

The product you are viewing cross references to these numbers

Rennline Fully Mechanical Hood Strut, Carbon Fibre. Porsche 911/912/930



How many times have you replaced your hood struts? Us too… that's why we developed the fully mechanical hood strut. The last hood strut that you will ever need. Factory hood struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket hoods, or hoods with bodywork.

Operation is simple. Just open your hood all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood strut will not fail for the life of the product, and therefore carries a lifetime warranty. It utilizes a billet design with complex machining to ensure a smooth and reliable operation.

It's available with either a carbon fibre body or a black aluminum body to suit your style.

For cars with steel hoods, we recommend two struts as the factory hinges flex when only 1 strut is used.
For aluminum or carbon fibre hoods, only one strut is required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E187CARBON

The product you are viewing cross references to these numbers

Rennline Fully Mechanical Hood and Decklid Strut Package, Carbon Fibre for Porsche 911/912/930

This set comes as a package with 2 hood struts and 1 decklid strut.



How many times have you replaced your hood and decklid struts? Us too… that's why we developed a line of fully mechanical hood and decklid struts. This is the last set off struts that you will ever need. Factory hood/decklid struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket decklids and tails. If you've ever installed a fiberglass hood or tail, you've probably also noticed the pressure of the hydraulic shock likes to torque the body panel, often creating an uneven body gap on the top left side.

Operation is simple. Just open your decklid all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood and decklid struts will not fail for the life of the product, and therefore carry a lifetime warranty. They utilize a billet design with complex machining to ensure a smooth and reliable operation. They're available with either a carbon fibre body or a black aluminum body to suit your style.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E187188CARBON

The product you are viewing cross references to these numbers

Rennline Fully Mechanical Hood and Decklid Strut, Black for Porsche 911/912/930

This set comes as a package with 2 hood struts and 1 decklid strut.



How many times have you replaced your hood and decklid struts? Us too… that's why we developed a line of fully mechanical hood and decklid struts. This is the last set off struts that you will ever need. Factory hood/decklid struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket decklids and tails. If you've ever installed a fiberglass hood or tail, you've probably also noticed the pressure of the hydraulic shock likes to torque the body panel, often creating an uneven body gap on the top left side.

Operation is simple. Just open your decklid all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood and decklid struts will not fail for the life of the product, and therefore carry a lifetime warranty. They utilize a billet design with complex machining to ensure a smooth and reliable operation. They're available with either a carbon fibre body or a black aluminum body to suit your style.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E187188BLACK

The product you are viewing cross references to these numbers

Front bonnet damper.

 

Fits:
Porsche 911 - 1974 to 1989

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151133100

The product you are viewing cross references to these numbers